| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Control Center PRO 6.2.9 contains a stack-based buffer overflow vulnerability in the user creation module's username field that allows attackers to overwrite Structured Exception Handler (SEH). Attackers can craft a malicious payload exceeding 664 bytes to inject shellcode and potentially execute arbitrary code on vulnerable Windows systems. |
| In certain Sonos products before S1 Release 11.12 and S2 release 15.9, the mt_7615.ko wireless driver does not properly validate an information element during negotiation of a WPA2 four-way handshake. This lack of validation leads to a stack buffer overflow. This can result in remote code execution within the kernel. This affects Amp, Arc, Arc SL, Beam, Beam Gen 2, Beam SL, and Five. |
| Millenium MP3 Studio versions up to and including 2.0 is vulnerable to a stack-based buffer overflow when parsing .pls playlist files. The application fails to properly validate the length of the File1 field within the playlist, allowing an attacker to craft a malicious .pls file that overwrites the Structured Exception Handler (SEH) and executes arbitrary code. Exploitation requires the victim to open the file locally, though remote execution may be possible if the .pls extension is registered to the application and opened via a browser. |
| A buffer overflow vulnerability has been identified in PostScript interpreter in various Lexmark devices. The vulnerability can be leveraged by an attacker to execute arbitrary code.
|
| Stack-based Buffer Overflow vulnerability in ABB RMC-100, ABB RMC-100 LITE.
When the REST interface is enabled by the user, and an attacker gains access to
the control network, and user/password broker authentication is enabled, and
CVE-2025-6074 is exploited, the attacker can overflow the buffer for username or
password.
This issue affects RMC-100: from 2105457-043 through 2105457-045; RMC-100 LITE: from 2106229-015 through 2106229-016. |
| The LCD KVM over IP Switch CL5708IM has a Stack-based Buffer Overflow vulnerability in firmware versions prior to v2.2.215, allowing unauthenticated remote attackers to exploit this vulnerability to execute arbitrary code on the device. |
| PCMan FTP Server 2.0 contains a buffer overflow vulnerability in the 'pwd' command that allows remote attackers to execute arbitrary code. Attackers can send a specially crafted payload during the FTP login process to overwrite memory and potentially gain system access. |
| A stack-based buffer overflow vulnerability exists in Synactis PDF In-The-Box ActiveX control (PDF_IN_1.ocx), specifically the ConnectToSynactis method. When a long string is passed to this method—intended to populate the ldCmdLine argument of a WinExec call—a strcpy operation overwrites a saved TRegistry class pointer on the stack. This allows remote attackers to execute arbitrary code in the context of the user by enticing them to visit a malicious webpage that instantiates the vulnerable ActiveX control. The vulnerability was discovered via its use in third-party software such as Logic Print 2013. |
| Under certain circumstances the iSTAR Configuration Utility (ICU) tool could have a buffer overflow issue |
| A stack buffer overflow vulnerability has been identified in certain router models. An authenticated attacker may trigger this vulnerability by sending a crafted request, potentially impacting the availability of the device.
Refer to the ' Security Update for ASUS Router Firmware' section on the ASUS Security Advisory for more information. |
| A buffer overflow with Xilinx Run Time Environment may allow a local attacker to read or corrupt data from the advanced extensible interface (AXI), potentially resulting in loss of confidentiality, integrity, and/or availability. |
| A vulnerability was found in Netgear WNCE3001 1.0.0.50. It has been classified as critical. This affects the function http_d of the component HTTP POST Request Handler. The manipulation of the argument Host leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| TP-Link AX1800 WiFi 6 Router (Archer AX21) devices allow unauthenticated attackers (on the LAN) to execute arbitrary code as root via the db_dir field to minidlnad. The attacker obtains the ability to modify files.db, and that can be used to reach a stack-based buffer overflow in minidlna-1.1.2/upnpsoap.c. Exploitation requires that a USB flash drive is connected to the router (customers often do this to make a \\192.168.0.1 share available on their local network). |
| AVS Audio Converter 9.1 contains a local buffer overflow vulnerability that allows local attackers to overwrite CPU registers by manipulating the 'Exit folder' input field. Attackers can craft a specially designed text file with 264 bytes of padding followed by register overwrite values to compromise the application and potentially execute arbitrary code. |
| The LCD KVM over IP Switch CL5708IM has a Stack-based Buffer Overflow vulnerability in firmware versions prior to v2.2.215, allowing unauthenticated remote attackers to exploit this vulnerability to execute arbitrary code on the device. |
| There are many buffer overflow vulnerabilities present in several CGI binaries of the charging station.This issue affects Iocharger firmware for AC model chargers beforeversion 24120701.
Likelihood: High – Given the prevalence of these buffer overflows, and the clear error message of the web server, an attacker is very likely to be able to find these vulnerabilities.
Impact: Low – Usually, overflowing one of these buffers just causes a segmentation fault of the CGI binary, which causes the web server to return a 502 Bad Gateway error. However the webserver itself is not affected, and no DoS can be achieved. Abusing these buffer overflows in a meaningful way requires highly technical knowledge, especially since ASLR also seems to be enabled on the charging station. However, a skilled attacker might be able to use one of these buffer overflows to obtain remote code execution.
CVSS clarification. The attack can be executed over any network connection the station is listening to and serves the web interface (AV:N), and there are no additional security measure sin place that need to be circumvented (AC:L), the attack does not rely on preconditions (AT:N). The attack does require authentication, but the level of authentication is irrelevant (PR:L), it does not require user interaction (UI:N). The attack has a small impact on the availability of the device (VC:N/VI:N/VA:L). There is no impact on subsequent systems. (SC:N/SI:N/SA:N). While this device is an EV charger handing significant amounts of power, we do not expect this vulnerability to have a safety impact. The attack can be automated (AU:Y). |
| The <redacted>.so library, which is used by <redacted>, is
vulnerable to a buffer overflow in the code that handles the deletion
of certificates. This buffer overflow can be triggered by providing a
long file path to the <redacted> action of the <redacted>.exe CGI binary or
to the <redacted>.sh CGI script. This binary or script will write this
file path to <redacted>, which is then
read by <redacted>.so
This issue affects Iocharger firmware for AC models before version 24120701.
Likelihood: Moderate – An attacker will have to find this exploit by
either obtaining the binaries involved in this vulnerability, or by trial
and error. Furthermore, the attacker will need a (low privilege)
account to gain access to the <redacted>.exe CGI binary or <redacted>.sh
script to trigger the vulnerability, or convince a user with such access
send an HTTP request that triggers it.
Impact: High – The <redacted> process, which we assume is
responsible for OCPP communication, will keep crashing after
performing the exploit. This happens because the buffer overflow
causes the process to segfault before
<redacted> is removed. This means that,
even though <redacted> is automatically restarted, it will crash
again as soon as it tries to parse the text file.
CVSS clarification. The attack can be executed over any network connection the station is listening to and serves the web interface (AV:N), and there are no additional security measure sin place that need to be circumvented (AC:L), the attack does not rely on preconditions (AT:N). The attack does require authentication, but the level of authentication is irrelevant (PR:L), it does not require user interaction (UI:N). The attack leads to reducred availability of the device (VC:N/VI:N/VA:H). THere is not impact on subsequent systems. (SC:N/SI:N/SA:N). Alltough this device is an EV charger handing significant amounts of power, we do not forsee a safety impact. The attack can be automated (AU:Y). Because the DoS condition is written to disk persistantly, it cannot be recovered by the user (R:I). |
| xmedcon 0.23.0 and fixed in v.0.24.0 is vulnerable to Buffer Overflow via libs/dicom/basic.c which allows an attacker to execute arbitrary code. |
| A vulnerability was found in PX4-Autopilot 1.12.3. It has been classified as problematic. This affects the function MavlinkReceiver::handle_message_trajectory_representation_waypoints of the file mavlink_receiver.cpp of the component TRAJECTORY_REPRESENTATION_WAYPOINTS Message Handler. The manipulation leads to stack-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. |
| There is a buffer overflow vulnerability in the underlying Local User Authentication Database service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.
|
