Search Results (47241 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-63898 1 Linux 1 Linux Kernel 2026-07-22 7.0 High
In the Linux kernel, the following vulnerability has been resolved: USB: serial: mct_u232: fix memory corruption with small endpoint The driver overrides the maximum transfer size for a specific device which only accepts 16 byte packets for its 32 byte bulk-out endpoint. Make sure to never increase the maximum transfer size to prevent slab corruption should a malicious device report a smaller endpoint max packet size than expected.
CVE-2026-63943 1 Linux 1 Linux Kernel 2026-07-22 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: Input: xpad - fix out-of-bounds access for Share button xpadone_process_packet() receives len directly from urb->actual_length and uses it to index the share-button byte at data[len - 18] or data[len - 26]. Since both len and data[0] are under the device's control, a broken controller can send a GIP_CMD_INPUT packet with actual_length < 18 (e.g. 5 bytes) and reach this code path, causing accesses beyond the actual array. Fix this by calculating the offset and checking bounds against the packet length.
CVE-2026-9499 1 Qt 1 Qt 2026-07-22 N/A
An out-of-bounds read (buffer over-read) vulnerability exists in QTextCodec::codecForName() in Qt. When the function is called with a QByteArray that is not NUL-terminated (for example, one created with QByteArray::fromRawData()), the codec-name matching routine reads past the end of the supplied buffer. In most cases this results in an incorrect text codec being selected; in the worst case, if the over-read reaches unmapped memory, the process crashes (denial of service). The over-read is bounded by the length of the longest codec-name candidate, and the out-of-bounds bytes are only compared internally against Qt's fixed list of codec names, so no data is disclosed to an attacker. Applications that do not pass non-NUL-terminated QByteArrays to QTextCodec::codecForName() are not exposed. The affected code resides in the Qt5Compat module from Qt 6.0.0 onward, and in Qt Core (qtbase) in Qt 4.x and Qt 5.x.
CVE-2026-16118 1 Redhat 1 Enterprise Linux 2026-07-22 7.1 High
A flaw was found in xdgmime. A heap-based buffer overflow can be triggered in _xdg_mime_magic_parse_magic_line() in the xdgmimemagic.c file on little-endian systems when an attacker-controlled MIME magic file in a user-writable XDG data location (e.g., in the $XDG_DATA_HOME/mime/magic path) is parsed by an application performing MIME type detection (e.g., via g_content_type_guess()). When performing byte-swap, incorrect pointer arithmetic on the write side causes an out-of-bounds write of 2 bytes, resulting in an application crash or memory corruption.
CVE-2026-16560 1 Redhat 2 Directory Server, Enterprise Linux 2026-07-22 5.3 Medium
A heap-buffer-overflow flaw was found in Directory Server (389-ds-base). When a DN contains a legacy-quoted value, the server won't close the heap allocation allowing another call to refer to the same memory pointer causing a denial of service or an arbitrary memory write operation.
CVE-2026-16096 1 Shibby 1 Tomato 2026-07-22 8.8 High
A vulnerability has been found in Shibby Tomato 1.28 RT-N5x MIPSR2 Build 124. This affects the function sub_40BB50 of the file /proc/webmon_recent_domains. The manipulation leads to stack-based buffer overflow. It is possible to initiate the attack remotely. This project is superseded by FreshTomato.
CVE-2026-16129 1 Princezuda 1 Safestclaw 2026-07-22 5.3 Medium
A vulnerability has been found in princezuda SafestClaw up to 4.2.4. This vulnerability affects the function ShellAction._validate_command of the file src/safestclaw/actions/shell.py of the component Built-in Web Interface. Such manipulation leads to incomplete blacklist. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The presence of this vulnerability remains uncertain at this time. The project maintainer explains: "On paper you're correct, this is a vulnerability. In practice, nothing your AI generated shows how it makes users vulnerable. It's open source. Someone can mod the shell allow list or remove that system. Present an actual poc that shows a threat to users."
CVE-2026-50304 1 Microsoft 10 .net, .net Framework, Windows 10 1607 and 7 more 2026-07-22 7.5 High
Stack-based buffer overflow in Active Directory Federation Services allows an unauthorized attacker to deny service over a network.
CVE-2026-50411 1 Microsoft 15 .net, .net Framework, Windows 10 1607 and 12 more 2026-07-22 7.5 High
Stack-based buffer overflow in Active Directory Federation Services (AD FS) allows an unauthorized attacker to deny service over a network.
CVE-2026-50355 1 Microsoft 10 .net, .net Framework, Windows 10 1607 and 7 more 2026-07-22 7.5 High
Stack-based buffer overflow in Active Directory Federation Services allows an unauthorized attacker to deny service over a network.
CVE-2026-50368 1 Microsoft 10 .net, .net Framework, Windows 10 1607 and 7 more 2026-07-22 7.5 High
Stack-based buffer overflow in Active Directory Federation Services allows an unauthorized attacker to deny service over a network.
CVE-2026-42015 1 Redhat 14 Discovery, Enterprise Linux, Enterprise Linux Eus and 11 more 2026-07-22 5.3 Medium
A flaw was found in gnutls. An off-by-one error exists in the PKCS#12 bag element bounds check. This vulnerability allows an remote attacker to write past the internal array of a PKCS#12 bag when appending to a bag that already contains 32 elements. This memory corruption could lead to a denial of service (DoS) or potentially other unspecified impacts.
CVE-2026-3833 2 Gnu, Redhat 15 Gnutls, Discovery, Enterprise Linux and 12 more 2026-07-22 6.5 Medium
A flaw was found in gnutls. This vulnerability occurs because gnutls performs case-sensitive comparisons of `nameConstraints` labels, specifically for `dNSName` (DNS) or `rfc822Name` (email) constraints within `excludedSubtrees` or `permittedSubtrees`. A remote attacker can exploit this by crafting a leaf certificate with casing differences in the Subject Alternative Name (SAN), leading to a policy bypass where a certificate that should be rejected is instead accepted. This could result in unauthorized access or information disclosure.
CVE-2026-42013 2 Gnu, Redhat 15 Gnutls, Discovery, Enterprise Linux and 12 more 2026-07-22 8.2 High
A flaw was found in gnutls. When validating certificates, an oversized Subject Alternative Name (SAN) could cause the validation process to incorrectly fall back to checking the Common Name (CN) field. This could allow a remote attacker to bypass proper certificate validation, potentially leading to spoofing or man-in-the-middle attacks.
CVE-2026-5260 2 Gnu, Redhat 14 Gnutls, Discovery, Enterprise Linux and 11 more 2026-07-22 8.2 High
A flaw was found in libgnutls. A remote attacker, by sending an extremely short premaster secret during an RSA key exchange to a server using an RSA key backed by a PKCS#11 token, could trigger a short heap overread. This memory corruption vulnerability could lead to information disclosure.
CVE-2026-42010 2 Gnu, Redhat 15 Gnutls, Ai Inference Server, Discovery and 12 more 2026-07-22 7.1 High
A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process.
CVE-2026-47393 1 Mervinpraison 1 Praisonai 2026-07-22 9.8 Critical
PraisonAI is a multi-agent teams system. CVE-2026-44338 (GHSA-6rmh-7xcm-cpxj) documents that PraisonAI ships a code-generator (`praisonai.deploy.api.generate_api_server_code`) that emits a Flask API server with authentication disabled by default. Users who follow the documented quickstart (`praisonai deploy --type api`) get a server that binds to `0.0.0.0` per the recommended sample YAML, exposes `/chat` and `/agents` endpoints, runs `praisonai.run()` on user-supplied JSON input — LLM orchestration with the API key materials present in the process environment, and does not require any authentication. Versions prior to 4.6.40 still ship the generator with `auth_enabled` defaulting to `False`. The fix shape is opt-in via `APIConfig(auth_enabled=True, auth_token=...)`. Version 4.6.40 fixes the issue.
CVE-2026-16461 1 Redhat 2 Enterprise Linux, Openshift 2026-07-22 6.5 Medium
A stack-based buffer overflow was found in rpcbind's rpcinfo utility. In rpcbdump() short mode (used by `rpcinfo -s`), version numbers from a remote RPCBPROC_DUMP reply are written into a fixed-size stack buffer without bounds checking. A user or administrator who runs `rpcinfo -s` against a malicious or compromised rpcbind endpoint could experience a crash or denial of service of the rpcinfo client.
CVE-2026-29007 2 Denx, U-boot 2 U-boot, U-boot 2026-07-22 5.3 Medium
U-Boot through 2026.04-rc3 contains an out-of-bounds read vulnerability in tcp_rx_state_machine() (net/tcp.c) when CONFIG_PROT_TCP is enabled, allowing remote attackers to read beyond TCP segment boundaries by crafting a malicious packet with a mismatched IP total length and TCP data offset field. Attackers can send a packet with an IP total length of 40 bytes and a TCP data offset claiming 60 bytes of header to cause tcp_parse_options() to read 40 bytes past the end of the TCP segment, potentially corrupting connection state variables such as rmt_win_scale and rmt_timestamp to disrupt TCP window calculations.
CVE-2026-64609 1 Apache 1 Fory 2026-07-22 9.1 Critical
Out-of-bounds read via sun.misc.Unsafe in Apache Fory. When out-of-band zero-copy deserialization is used, readAlignedVarUint() can read beyond the bounds of the underlying buffer. Out-of-band zero-copy deserialization is an opt-in feature; applications that do not use it are not affected. This issue affects Apache Fory (formerly Apache Fury): from 0.5.0 before 1.4.0. Versions before 0.11.0 were published under the Maven coordinates org.apache.fury:fury-core. Users are recommended to upgrade to version 1.4.0, which fixes the issue.