| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/mm: Fix null-pointer dereference in pgtable_cache_add
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity. |
| Vulnerability of improper resource management in the memory management module
Impact: Successful exploitation of this vulnerability may affect availability. |
| In DA, there is a possible permission bypass due to an incorrect status check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS08355514; Issue ID: ALPS08355514. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix improper handling of refcount in ice_sriov_set_msix_vec_count()
This patch addresses an issue with improper reference count handling in the
ice_sriov_set_msix_vec_count() function.
First, the function calls ice_get_vf_by_id(), which increments the
reference count of the vf pointer. If the subsequent call to
ice_get_vf_vsi() fails, the function currently returns an error without
decrementing the reference count of the vf pointer, leading to a reference
count leak. The correct behavior, as implemented in this patch, is to
decrement the reference count using ice_put_vf(vf) before returning an
error when vsi is NULL.
Second, the function calls ice_sriov_get_irqs(), which sets
vf->first_vector_idx. If this call returns a negative value, indicating an
error, the function returns an error without decrementing the reference
count of the vf pointer, resulting in another reference count leak. The
patch addresses this by adding a call to ice_put_vf(vf) before returning
an error when vf->first_vector_idx < 0.
This bug was identified by an experimental static analysis tool developed
by our team. The tool specializes in analyzing reference count operations
and identifying potential mismanagement of reference counts. In this case,
the tool flagged the missing decrement operation as a potential issue,
leading to this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/fbdev-dma: Only set smem_start is enable per module option
Only export struct fb_info.fix.smem_start if that is required by the
user and the memory does not come from vmalloc().
Setting struct fb_info.fix.smem_start breaks systems where DMA
memory is backed by vmalloc address space. An example error is
shown below.
[ 3.536043] ------------[ cut here ]------------
[ 3.540716] virt_to_phys used for non-linear address: 000000007fc4f540 (0xffff800086001000)
[ 3.552628] WARNING: CPU: 4 PID: 61 at arch/arm64/mm/physaddr.c:12 __virt_to_phys+0x68/0x98
[ 3.565455] Modules linked in:
[ 3.568525] CPU: 4 PID: 61 Comm: kworker/u12:5 Not tainted 6.6.23-06226-g4986cc3e1b75-dirty #250
[ 3.577310] Hardware name: NXP i.MX95 19X19 board (DT)
[ 3.582452] Workqueue: events_unbound deferred_probe_work_func
[ 3.588291] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 3.595233] pc : __virt_to_phys+0x68/0x98
[ 3.599246] lr : __virt_to_phys+0x68/0x98
[ 3.603276] sp : ffff800083603990
[ 3.677939] Call trace:
[ 3.680393] __virt_to_phys+0x68/0x98
[ 3.684067] drm_fbdev_dma_helper_fb_probe+0x138/0x238
[ 3.689214] __drm_fb_helper_initial_config_and_unlock+0x2b0/0x4c0
[ 3.695385] drm_fb_helper_initial_config+0x4c/0x68
[ 3.700264] drm_fbdev_dma_client_hotplug+0x8c/0xe0
[ 3.705161] drm_client_register+0x60/0xb0
[ 3.709269] drm_fbdev_dma_setup+0x94/0x148
Additionally, DMA memory is assumed to by contiguous in physical
address space, which is not guaranteed by vmalloc().
Resolve this by checking the module flag drm_leak_fbdev_smem when
DRM allocated the instance of struct fb_info. Fbdev-dma then only
sets smem_start only if required (via FBINFO_HIDE_SMEM_START). Also
guarantee that the framebuffer is not located in vmalloc address
space. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/probes: fix error check in parse_btf_field()
btf_find_struct_member() might return NULL or an error via the
ERR_PTR() macro. However, its caller in parse_btf_field() only checks
for the NULL condition. Fix this by using IS_ERR() and returning the
error up the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Do not unregister events twice
Nicolas reported that using:
# trace-cmd record -e all -M 10 -p osnoise --poll
Resulted in the following kernel warning:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1217 at kernel/tracepoint.c:404 tracepoint_probe_unregister+0x280/0x370
[...]
CPU: 0 PID: 1217 Comm: trace-cmd Not tainted 5.17.0-rc6-next-20220307-nico+ #19
RIP: 0010:tracepoint_probe_unregister+0x280/0x370
[...]
CR2: 00007ff919b29497 CR3: 0000000109da4005 CR4: 0000000000170ef0
Call Trace:
<TASK>
osnoise_workload_stop+0x36/0x90
tracing_set_tracer+0x108/0x260
tracing_set_trace_write+0x94/0xd0
? __check_object_size.part.0+0x10a/0x150
? selinux_file_permission+0x104/0x150
vfs_write+0xb5/0x290
ksys_write+0x5f/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7ff919a18127
[...]
---[ end trace 0000000000000000 ]---
The warning complains about an attempt to unregister an
unregistered tracepoint.
This happens on trace-cmd because it first stops tracing, and
then switches the tracer to nop. Which is equivalent to:
# cd /sys/kernel/tracing/
# echo osnoise > current_tracer
# echo 0 > tracing_on
# echo nop > current_tracer
The osnoise tracer stops the workload when no trace instance
is actually collecting data. This can be caused both by
disabling tracing or disabling the tracer itself.
To avoid unregistering events twice, use the existing
trace_osnoise_callback_enabled variable to check if the events
(and the workload) are actually active before trying to
deactivate them. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: qgroup: do not warn on record without old_roots populated
[BUG]
There are some reports from the mailing list that since v6.1 kernel, the
WARN_ON() inside btrfs_qgroup_account_extent() gets triggered during
rescan:
WARNING: CPU: 3 PID: 6424 at fs/btrfs/qgroup.c:2756 btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs]
CPU: 3 PID: 6424 Comm: snapperd Tainted: P OE 6.1.2-1-default #1 openSUSE Tumbleweed 05c7a1b1b61d5627475528f71f50444637b5aad7
RIP: 0010:btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs]
Call Trace:
<TASK>
btrfs_commit_transaction+0x30c/0xb40 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
? start_transaction+0xc3/0x5b0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
btrfs_qgroup_rescan+0x42/0xc0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
btrfs_ioctl+0x1ab9/0x25c0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
? __rseq_handle_notify_resume+0xa9/0x4a0
? mntput_no_expire+0x4a/0x240
? __seccomp_filter+0x319/0x4d0
__x64_sys_ioctl+0x90/0xd0
do_syscall_64+0x5b/0x80
? syscall_exit_to_user_mode+0x17/0x40
? do_syscall_64+0x67/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd9b790d9bf
</TASK>
[CAUSE]
Since commit e15e9f43c7ca ("btrfs: introduce
BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting"), if
our qgroup is already in inconsistent state, we will no longer do the
time-consuming backref walk.
This can leave some qgroup records without a valid old_roots ulist.
Normally this is fine, as btrfs_qgroup_account_extents() would also skip
those records if we have NO_ACCOUNTING flag set.
But there is a small window, if we have NO_ACCOUNTING flag set, and
inserted some qgroup_record without a old_roots ulist, but then the user
triggered a qgroup rescan.
During btrfs_qgroup_rescan(), we firstly clear NO_ACCOUNTING flag, then
commit current transaction.
And since we have a qgroup_record with old_roots = NULL, we trigger the
WARN_ON() during btrfs_qgroup_account_extents().
[FIX]
Unfortunately due to the introduction of NO_ACCOUNTING flag, the
assumption that every qgroup_record would have its old_roots populated
is no longer correct.
Fix the false alerts and drop the WARN_ON(). |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails
The spi controller supports 44-bit address space on AXI in DMA mode,
so set dma_addr_t width to 44-bit to avoid using a swiotlb mapping.
In addition, if dma_map_single fails, it should return immediately
instead of continuing doing the DMA operation which bases on invalid
address.
This fixes the following crash which occurs in reading a big block
from flash:
[ 123.633577] zynqmp-qspi ff0f0000.spi: swiotlb buffer is full (sz: 4194304 bytes), total 32768 (slots), used 0 (slots)
[ 123.644230] zynqmp-qspi ff0f0000.spi: ERR:rxdma:memory not mapped
[ 123.784625] Unable to handle kernel paging request at virtual address 00000000003fffc0
[ 123.792536] Mem abort info:
[ 123.795313] ESR = 0x96000145
[ 123.798351] EC = 0x25: DABT (current EL), IL = 32 bits
[ 123.803655] SET = 0, FnV = 0
[ 123.806693] EA = 0, S1PTW = 0
[ 123.809818] Data abort info:
[ 123.812683] ISV = 0, ISS = 0x00000145
[ 123.816503] CM = 1, WnR = 1
[ 123.819455] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000805047000
[ 123.825887] [00000000003fffc0] pgd=0000000803b45003, p4d=0000000803b45003, pud=0000000000000000
[ 123.834586] Internal error: Oops: 96000145 [#1] PREEMPT SMP |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: footbridge: fix PCI interrupt mapping
Since commit 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in
pci_device_probe()"), the PCI code will call the IRQ mapping function
whenever a PCI driver is probed. If these are marked as __init, this
causes an oops if a PCI driver is loaded or bound after the kernel has
initialised. |
| DragonflyDB Dragonfly before 1.27.0 allows authenticated users to cause a denial of service (daemon crash) via a crafted Redis command. The validity of the scan cursor was not checked. |
| flask-session-captcha is a package which allows users to extend Flask by adding an image based captcha stored in a server side session. In versions prior to 1.2.1, he `captcha.validate()` function would return `None` if passed no value (e.g. by submitting an having an empty form). If implementing users were checking the return value to be **False**, the captcha verification check could be bypassed. Version 1.2.1 fixes the issue. Users can workaround the issue by not explicitly checking that the value is False. Checking the return value less explicitly should still work. |
| The KVM subsystem in the Linux kernel through 4.2.6, and Xen 4.3.x through 4.6.x, allows guest OS users to cause a denial of service (host OS panic or hang) by triggering many #DB (aka Debug) exceptions, related to svm.c. |
| D-Link DIR-823G A1V1.0.2B05 was discovered to contain Null-pointer dereferences in sub_4484A8(). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| Cybozu Office 9.0.0 through 10.4.0 allows remote attackers to cause a denial of service. |
| The sanity_check_raw_super function in fs/f2fs/super.c in the Linux kernel before 4.11.1 does not validate the segment count, which allows local users to gain privileges via unspecified vectors. |
| A vulnerability in the TCP normalizer of Cisco Adaptive Security Appliance (ASA) Software (8.0 through 8.7 and 9.0 through 9.6) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause Cisco ASA and FTD to drop any further incoming traffic on all interfaces, resulting in a denial of service (DoS) condition. The vulnerability is due to improper limitation of the global out-of-order TCP queue for specific block sizes. An attacker could exploit this vulnerability by sending a large number of unique permitted TCP connections with out-of-order segments. An exploit could allow the attacker to exhaust available blocks in the global out-of-order TCP queue, causing the dropping of any further incoming traffic on all interfaces and resulting in a DoS condition. Cisco Bug IDs: CSCvb46321. |
| A vulnerability in the Stream Control Transmission Protocol (SCTP) decoder of the Cisco NetFlow Generation Appliance (NGA) with software before 1.1(1a) could allow an unauthenticated, remote attacker to cause the device to hang or unexpectedly reload, causing a denial of service (DoS) condition. The vulnerability is due to incomplete validation of SCTP packets being monitored on the NGA data ports. An attacker could exploit this vulnerability by sending malformed SCTP packets on a network that is monitored by an NGA data port. SCTP packets addressed to the IP address of the NGA itself will not trigger this vulnerability. An exploit could allow the attacker to cause the appliance to become unresponsive or reload, causing a DoS condition. User interaction could be needed to recover the device using the reboot command from the CLI. The following Cisco NetFlow Generation Appliances are vulnerable: NGA 3140, NGA 3240, NGA 3340. Cisco Bug IDs: CSCvc83320. |
| A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078. |
| A vulnerability in the Event Management Service daemon (emsd) of Cisco IOS XR routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to improper handling of gRPC requests. An attacker could exploit this vulnerability by repeatedly sending unauthenticated gRPC requests to the affected device. A successful exploit could allow the attacker to crash the device in such a manner that manual intervention is required to recover. This vulnerability affects all Cisco IOS XR platforms that are running release 6.1.1 of Cisco IOS XR Software when the gRPC service is enabled on the device. The gRPC service is not enabled by default. Cisco Bug IDs: CSCvb14441. |
