| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Kottster is a self hosted Node.js admin panel. From versions 3.2.0 to before 3.3.2, Kottster contains a pre-authentication remote code execution (RCE) vulnerability when running in development mode. This affects development mode only, production deployments were never affected. This issue has been fixed in version 3.3.2. |
| An OS command injection vulnerability exists in AVTECH DVR, NVR, and IP camera devices within the adcommand.cgi endpoint, which interfaces with the ActionD daemon. Authenticated users can invoke the DoShellCmd operation, passing arbitrary input via the strCmd parameter. This input is executed directly by the system shell without sanitation allowing attackers to execute commands as the root user. |
| OS command injection vulnerability exists in Deco BE65 Pro firmware versions prior to "Deco BE65 Pro(JP)_V1_1.1.2 Build 20250123". If this vulnerability is exploited, an arbitrary OS command may be executed by the user who can log in to the device. |
| When decoding a frame for a SANM file (ANIM v0 variant), the decoded data can be larger than the buffer allocated for it.
Frames encoded with codec 48 can specify their resolution (width x height). A buffer of appropriate size is allocated depending on the resolution.
This codec can encode the frame contents using a run-length encoding algorithm. There are no checks that the decoded frame fits in the allocated buffer, leading to a heap-buffer-overflow.
process_frame_obj initializes the buffers based on the frame resolution:
We recommend upgrading to version 8.0 or beyond. |
| When calculating the content path in handling of MPEG-DASH manifests, there's an out-of-bounds NUL-byte write one byte past the end of the buffer.When we call xmlNodeGetContent below [0], it returns a buffer precisely allocated to match the string length, using strdup internally. If this buffer is not an empty string, it is assigned to root_url at [1].If the last (non-NUL) byte in this buffer is not '/' then we append '/' in-place at [2]. This will write two bytes into the buffer, starting at the last valid byte in the buffer, writing the NUL byte beyond the end of the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| jupyterlab-git is a JupyterLab extension for version control using Git. On many platforms, a third party can create a Git repository under a name that includes a shell command substitution string in the syntax $(<command>). These directory names are allowed in macOS and a majority of Linux distributions. If a user starts jupyter-lab in a parent directory of this inappropriately-named Git repository, opens it, and clicks "Git > Open Git Repository in Terminal" from the menu bar, then the injected command <command> is run in the user's shell without the user's permission. This issue is occurring because when that menu entry is clicked, jupyterlab-git opens the terminal and runs cd <git-repo-path> through the shell to set the current directory. Doing so runs any command substitution strings present in the directory name, which leads to the command injection issue described here. A previous patch provided an incomplete fix. This vulnerability is fixed in 0.51.1. |
| Out-of-bounds Write vulnerability in dail8859 NotepadNext (src/lua/src modules). This vulnerability is associated with program files ldebug.C, lvm.C.
This issue affects NotepadNext: through v0.11. |
| A vulnerability exits in driver snxppamd.sys in SUNIX Parallel Driver x64 - 10.1.0.0, which allows low-privileged users to read and write arbitary i/o port via specially crafted IOCTL requests . This can be exploited for privilege escalation, code execution under high privileges, and information disclosure. These signed drivers can also be used to bypass the Microsoft driver-signing policy to deploy malicious code. |
| dag-factory is a library for Apache Airflow® to construct DAGs declaratively via configuration files. In versions 0.23.0a8 and below, a high-severity vulnerability has been identified in the cicd.yml workflow within the astronomer/dag-factory GitHub repository. The workflow, specifically when triggered by pull_request_target, is susceptible to exploitation, allowing an attacker to execute arbitrary code within the GitHub Actions runner environment. This misconfiguration enables an attacker to establish a reverse shell, exfiltrate sensitive secrets, including the highly-privileged GITHUB_TOKEN, and ultimately gain full control over the repository. This is fixed in version 0.23.0a9. |
| A Looker user with a Developer role could cause Looker to execute a malicious command, due to insecure processing of Teradata driver parameters.
Looker-hosted and Self-hosted were found to be vulnerable.
This issue has already been mitigated for Looker-hosted instances. No user action is required for these.
Self-hosted instances must be upgraded as soon as possible. This vulnerability has been patched in all supported versions of Self-hosted.
The versions below have all been updated to protect from this vulnerability. You can download these versions at the Looker download page https://download.looker.com/ :
* 24.12.108+
* 24.18.200+
* 25.0.78+
* 25.6.65+
* 25.8.47+
* 25.12.10+
* 25.14+ |
| In MIT Kerberos 5 (aka krb5) before 1.22 (with incremental propagation), there is an integer overflow for a large update size to resize() in kdb_log.c. An authenticated attacker can cause an out-of-bounds write and kadmind daemon crash. |
| A vulnerability in the file creation process on the command line interface of AOS-8 Instant and AOS-10 AP could allow an authenticated remote attacker to perform remote code execution (RCE). Successful exploitation could allow an attacker to execute arbitrary operating system commands on the underlying operating system leading to potential system compromise. |
| A vulnerability exits in driver snxpsamd.sys in SUNIX Serial Driver x64 - 10.1.0.0, which allows low-privileged users to read and write arbitary i/o port via specially crafted IOCTL requests . This can be exploited for privilege escalation, code execution under high privileges, and information disclosure. These signed drivers can also be used to bypass the Microsoft driver-signing policy to deploy malicious code. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that the height and width are divisible by 8.
If the height or width of the image is not divisible by 8, the copy loops at [0] and [1] will continue to write until the next multiple of 8.
The buffer td->uncompressed_data is allocated in decode_block based on the precise height and width of the image, so the "rounded-up" multiple of 8 in the copy loop can exceed the buffer bounds, and the write block starting at [2] can corrupt following heap memory.
We recommend upgrading to version 8.0 or beyond. |
| evernote-mcp-server openBrowser Command Injection Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of evernote-mcp-server. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.
The specific flaw exists within the openBrowser function. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the service account. Was ZDI-CAN-27913. |
| A command injection vulnerability in Palo Alto Networks PAN-OS® software enables an authenticated administrator to bypass system restrictions and run arbitrary commands as a root user. To be able to exploit this issue, the user must have access to the PAN-OS CLI.
The security risk posed by this issue is significantly minimized when CLI access is restricted to a limited group of administrators.
Cloud NGFW and Prisma® Access are not affected by this vulnerability. |
| A vulnerability in the CLI of Cisco Secure Firewall Management Center (FMC) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root.
This vulnerability is due to improper input validation for specific CLI commands. An attacker could exploit this vulnerability by injecting operating system commands into a legitimate command. A successful exploit could allow the attacker to escape the restricted command prompt and execute arbitrary commands on the underlying operating system. To successfully exploit this vulnerability, an attacker would need valid Administrator credentials.
For more information about vulnerable scenarios, see the Details ["#details"] section of this advisory. |
| An OS command injection issue exists in Nimesa Backup and Recovery v2.3 and v2.4. If this vulnerability is exploited, an arbitrary OS commands may be executed on the server where the product is running. |
| If an unauthenticated user sends a large amount of data to the Stork UI, it may cause memory and disk use problems for the system running the Stork server.
This issue affects Stork versions 1.0.0 through 2.3.0. |
| SAP Web Dispatcher, Internet Communication Manager (ICM), and SAP Content Server allow an unauthenticated user to exploit logical errors that lead to a memory corruption vulnerability. This results in high impact on the availability with no impact on confidentiality or integrity of the application. |
