| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Prevent sending WMI commands to firmware during firmware crash
Currently, we encounter the following kernel call trace when a firmware
crash occurs. This happens because the host sends WMI commands to the
firmware while it is in recovery, causing the commands to fail and
resulting in the kernel call trace.
Set the ATH12K_FLAG_CRASH_FLUSH and ATH12K_FLAG_RECOVERY flags when the
host driver receives the firmware crash notification from MHI. This
prevents sending WMI commands to the firmware during recovery.
Call Trace:
<TASK>
dump_stack_lvl+0x75/0xc0
register_lock_class+0x6be/0x7a0
? __lock_acquire+0x644/0x19a0
__lock_acquire+0x95/0x19a0
lock_acquire+0x265/0x310
? ath12k_ce_send+0xa2/0x210 [ath12k]
? find_held_lock+0x34/0xa0
? ath12k_ce_send+0x56/0x210 [ath12k]
_raw_spin_lock_bh+0x33/0x70
? ath12k_ce_send+0xa2/0x210 [ath12k]
ath12k_ce_send+0xa2/0x210 [ath12k]
ath12k_htc_send+0x178/0x390 [ath12k]
ath12k_wmi_cmd_send_nowait+0x76/0xa0 [ath12k]
ath12k_wmi_cmd_send+0x62/0x190 [ath12k]
ath12k_wmi_pdev_bss_chan_info_request+0x62/0xc0 [ath1
ath12k_mac_op_get_survey+0x2be/0x310 [ath12k]
ieee80211_dump_survey+0x99/0x240 [mac80211]
nl80211_dump_survey+0xe7/0x470 [cfg80211]
? kmalloc_reserve+0x59/0xf0
genl_dumpit+0x24/0x70
netlink_dump+0x177/0x360
__netlink_dump_start+0x206/0x280
genl_family_rcv_msg_dumpit.isra.22+0x8a/0xe0
? genl_family_rcv_msg_attrs_parse.isra.23+0xe0/0xe0
? genl_op_lock.part.12+0x10/0x10
? genl_dumpit+0x70/0x70
genl_rcv_msg+0x1d0/0x290
? nl80211_del_station+0x330/0x330 [cfg80211]
? genl_get_cmd_both+0x50/0x50
netlink_rcv_skb+0x4f/0x100
genl_rcv+0x1f/0x30
netlink_unicast+0x1b6/0x260
netlink_sendmsg+0x31a/0x450
__sock_sendmsg+0xa8/0xb0
____sys_sendmsg+0x1e4/0x260
___sys_sendmsg+0x89/0xe0
? local_clock_noinstr+0xb/0xc0
? rcu_is_watching+0xd/0x40
? kfree+0x1de/0x370
? __sys_sendmsg+0x7a/0xc0
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix node corruption in ar->arvifs list
In current WLAN recovery code flow, ath12k_core_halt() only reinitializes
the "arvifs" list head. This will cause the list node immediately following
the list head to become an invalid list node. Because the prev of that node
still points to the list head "arvifs", but the next of the list head
"arvifs" no longer points to that list node.
When a WLAN recovery occurs during the execution of a vif removal, and it
happens before the spin_lock_bh(&ar->data_lock) in
ath12k_mac_vdev_delete(), list_del() will detect the previously mentioned
situation, thereby triggering a kernel panic.
The fix is to remove and reinitialize all vif list nodes from the list head
"arvifs" during WLAN halt. The reinitialization is to make the list nodes
valid, ensuring that the list_del() in ath12k_mac_vdev_delete() can execute
normally.
Call trace:
__list_del_entry_valid_or_report+0xd4/0x100 (P)
ath12k_mac_remove_link_interface.isra.0+0xf8/0x2e4 [ath12k]
ath12k_scan_vdev_clean_work+0x40/0x164 [ath12k]
cfg80211_wiphy_work+0xfc/0x100
process_one_work+0x164/0x2d0
worker_thread+0x254/0x380
kthread+0xfc/0x100
ret_from_fork+0x10/0x20
The change is mostly copied from the ath11k patch:
https://lore.kernel.org/all/20250320053145.3445187-1-quic_stonez@quicinc.com/
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
IB/cm: Drop lockdep assert and WARN when freeing old msg
The send completion handler can run after cm_id has advanced to another
message. The cm_id lock is not needed in this case, but a recent change
re-used cm_free_priv_msg(), which asserts that the lock is held and
WARNs if the cm_id's currently outstanding msg is different than the one
being freed. |
| In the Linux kernel, the following vulnerability has been resolved:
hisi_acc_vfio_pci: bugfix live migration function without VF device driver
If the VF device driver is not loaded in the Guest OS and we attempt to
perform device data migration, the address of the migrated data will
be NULL.
The live migration recovery operation on the destination side will
access a null address value, which will cause access errors.
Therefore, live migration of VMs without added VF device drivers
does not require device data migration.
In addition, when the queue address data obtained by the destination
is empty, device queue recovery processing will not be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
This patch addresses below issues,
1. Active traffic on the leaf node must be stopped before its send queue
is reassigned to the parent. This patch resolves the issue by marking
the node as 'Inner'.
2. During a system reboot, the interface receives TC_HTB_LEAF_DEL
and TC_HTB_LEAF_DEL_LAST callbacks to delete its HTB queues.
In the case of TC_HTB_LEAF_DEL_LAST, although the same send queue
is reassigned to the parent, the current logic still attempts to update
the real number of queues, leadning to below warnings
New queues can't be registered after device unregistration.
WARNING: CPU: 0 PID: 6475 at net/core/net-sysfs.c:1714
netdev_queue_update_kobjects+0x1e4/0x200 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/dax: Fix "don't skip locked entries when scanning entries"
Commit 6be3e21d25ca ("fs/dax: don't skip locked entries when scanning
entries") introduced a new function, wait_entry_unlocked_exclusive(),
which waits for the current entry to become unlocked without advancing
the XArray iterator state.
Waiting for the entry to become unlocked requires dropping the XArray
lock. This requires calling xas_pause() prior to dropping the lock
which leaves the xas in a suitable state for the next iteration. However
this has the side-effect of advancing the xas state to the next index.
Normally this isn't an issue because xas_for_each() contains code to
detect this state and thus avoid advancing the index a second time on
the next loop iteration.
However both callers of and wait_entry_unlocked_exclusive() itself
subsequently use the xas state to reload the entry. As xas_pause()
updated the state to the next index this will cause the current entry
which is being waited on to be skipped. This caused the following
warning to fire intermittently when running xftest generic/068 on an XFS
filesystem with FS DAX enabled:
[ 35.067397] ------------[ cut here ]------------
[ 35.068229] WARNING: CPU: 21 PID: 1640 at mm/truncate.c:89 truncate_folio_batch_exceptionals+0xd8/0x1e0
[ 35.069717] Modules linked in: nd_pmem dax_pmem nd_btt nd_e820 libnvdimm
[ 35.071006] CPU: 21 UID: 0 PID: 1640 Comm: fstest Not tainted 6.15.0-rc7+ #77 PREEMPT(voluntary)
[ 35.072613] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/204
[ 35.074845] RIP: 0010:truncate_folio_batch_exceptionals+0xd8/0x1e0
[ 35.075962] Code: a1 00 00 00 f6 47 0d 20 0f 84 97 00 00 00 4c 63 e8 41 39 c4 7f 0b eb 61 49 83 c5 01 45 39 ec 7e 58 42 f68
[ 35.079522] RSP: 0018:ffffb04e426c7850 EFLAGS: 00010202
[ 35.080359] RAX: 0000000000000000 RBX: ffff9d21e3481908 RCX: ffffb04e426c77f4
[ 35.081477] RDX: ffffb04e426c79e8 RSI: ffffb04e426c79e0 RDI: ffff9d21e34816e8
[ 35.082590] RBP: ffffb04e426c79e0 R08: 0000000000000001 R09: 0000000000000003
[ 35.083733] R10: 0000000000000000 R11: 822b53c0f7a49868 R12: 000000000000001f
[ 35.084850] R13: 0000000000000000 R14: ffffb04e426c78e8 R15: fffffffffffffffe
[ 35.085953] FS: 00007f9134c87740(0000) GS:ffff9d22abba0000(0000) knlGS:0000000000000000
[ 35.087346] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 35.088244] CR2: 00007f9134c86000 CR3: 000000040afff000 CR4: 00000000000006f0
[ 35.089354] Call Trace:
[ 35.089749] <TASK>
[ 35.090168] truncate_inode_pages_range+0xfc/0x4d0
[ 35.091078] truncate_pagecache+0x47/0x60
[ 35.091735] xfs_setattr_size+0xc7/0x3e0
[ 35.092648] xfs_vn_setattr+0x1ea/0x270
[ 35.093437] notify_change+0x1f4/0x510
[ 35.094219] ? do_truncate+0x97/0xe0
[ 35.094879] do_truncate+0x97/0xe0
[ 35.095640] path_openat+0xabd/0xca0
[ 35.096278] do_filp_open+0xd7/0x190
[ 35.096860] do_sys_openat2+0x8a/0xe0
[ 35.097459] __x64_sys_openat+0x6d/0xa0
[ 35.098076] do_syscall_64+0xbb/0x1d0
[ 35.098647] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 35.099444] RIP: 0033:0x7f9134d81fc1
[ 35.100033] Code: 75 57 89 f0 25 00 00 41 00 3d 00 00 41 00 74 49 80 3d 2a 26 0e 00 00 74 6d 89 da 48 89 ee bf 9c ff ff ff5
[ 35.102993] RSP: 002b:00007ffcd41e0d10 EFLAGS: 00000202 ORIG_RAX: 0000000000000101
[ 35.104263] RAX: ffffffffffffffda RBX: 0000000000000242 RCX: 00007f9134d81fc1
[ 35.105452] RDX: 0000000000000242 RSI: 00007ffcd41e1200 RDI: 00000000ffffff9c
[ 35.106663] RBP: 00007ffcd41e1200 R08: 0000000000000000 R09: 0000000000000064
[ 35.107923] R10: 00000000000001a4 R11: 0000000000000202 R12: 0000000000000066
[ 35.109112] R13: 0000000000100000 R14: 0000000000100000 R15: 0000000000000400
[ 35.110357] </TASK>
[ 35.110769] irq event stamp: 8415587
[ 35.111486] hardirqs last enabled at (8415599): [<ffffffff8d74b562>] __up_console_se
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: tipc: fix refcount warning in tipc_aead_encrypt
syzbot reported a refcount warning [1] caused by calling get_net() on
a network namespace that is being destroyed (refcount=0). This happens
when a TIPC discovery timer fires during network namespace cleanup.
The recently added get_net() call in commit e279024617134 ("net/tipc:
fix slab-use-after-free Read in tipc_aead_encrypt_done") attempts to
hold a reference to the network namespace. However, if the namespace
is already being destroyed, its refcount might be zero, leading to the
use-after-free warning.
Replace get_net() with maybe_get_net(), which safely checks if the
refcount is non-zero before incrementing it. If the namespace is being
destroyed, return -ENODEV early, after releasing the bearer reference.
[1]: https://lore.kernel.org/all/68342b55.a70a0220.253bc2.0091.GAE@google.com/T/#m12019cf9ae77e1954f666914640efa36d52704a2 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: sanitize request list handling
Validate the request in nvme_tcp_handle_r2t() to ensure it's not part of
any list, otherwise a malicious R2T PDU might inject a loop in request
list processing. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: uartlite: register uart driver in init
When two instances of uart devices are probing, a concurrency race can
occur. If one thread calls uart_register_driver function, which first
allocates and assigns memory to 'uart_state' member of uart_driver
structure, the other instance can bypass uart driver registration and
call ulite_assign. This calls uart_add_one_port, which expects the uart
driver to be fully initialized. This leads to a kernel panic due to a
null pointer dereference:
[ 8.143581] BUG: kernel NULL pointer dereference, address: 00000000000002b8
[ 8.156982] #PF: supervisor write access in kernel mode
[ 8.156984] #PF: error_code(0x0002) - not-present page
[ 8.156986] PGD 0 P4D 0
...
[ 8.180668] RIP: 0010:mutex_lock+0x19/0x30
[ 8.188624] Call Trace:
[ 8.188629] ? __die_body.cold+0x1a/0x1f
[ 8.195260] ? page_fault_oops+0x15c/0x290
[ 8.209183] ? __irq_resolve_mapping+0x47/0x80
[ 8.209187] ? exc_page_fault+0x64/0x140
[ 8.209190] ? asm_exc_page_fault+0x22/0x30
[ 8.209196] ? mutex_lock+0x19/0x30
[ 8.223116] uart_add_one_port+0x60/0x440
[ 8.223122] ? proc_tty_register_driver+0x43/0x50
[ 8.223126] ? tty_register_driver+0x1ca/0x1e0
[ 8.246250] ulite_probe+0x357/0x4b0 [uartlite]
To prevent it, move uart driver registration in to init function. This
will ensure that uart_driver is always registered when probe function
is called. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: save the SR_SUM status over switches
When threads/tasks are switched we need to ensure the old execution's
SR_SUM state is saved and the new thread has the old SR_SUM state
restored.
The issue was seen under heavy load especially with the syz-stress tool
running, with crashes as follows in schedule_tail:
Unable to handle kernel access to user memory without uaccess routines
at virtual address 000000002749f0d0
Oops [#1]
Modules linked in:
CPU: 1 PID: 4875 Comm: syz-executor.0 Not tainted
5.12.0-rc2-syzkaller-00467-g0d7588ab9ef9 #0
Hardware name: riscv-virtio,qemu (DT)
epc : schedule_tail+0x72/0xb2 kernel/sched/core.c:4264
ra : task_pid_vnr include/linux/sched.h:1421 [inline]
ra : schedule_tail+0x70/0xb2 kernel/sched/core.c:4264
epc : ffffffe00008c8b0 ra : ffffffe00008c8ae sp : ffffffe025d17ec0
gp : ffffffe005d25378 tp : ffffffe00f0d0000 t0 : 0000000000000000
t1 : 0000000000000001 t2 : 00000000000f4240 s0 : ffffffe025d17ee0
s1 : 000000002749f0d0 a0 : 000000000000002a a1 : 0000000000000003
a2 : 1ffffffc0cfac500 a3 : ffffffe0000c80cc a4 : 5ae9db91c19bbe00
a5 : 0000000000000000 a6 : 0000000000f00000 a7 : ffffffe000082eba
s2 : 0000000000040000 s3 : ffffffe00eef96c0 s4 : ffffffe022c77fe0
s5 : 0000000000004000 s6 : ffffffe067d74e00 s7 : ffffffe067d74850
s8 : ffffffe067d73e18 s9 : ffffffe067d74e00 s10: ffffffe00eef96e8
s11: 000000ae6cdf8368 t3 : 5ae9db91c19bbe00 t4 : ffffffc4043cafb2
t5 : ffffffc4043cafba t6 : 0000000000040000
status: 0000000000000120 badaddr: 000000002749f0d0 cause:
000000000000000f
Call Trace:
[<ffffffe00008c8b0>] schedule_tail+0x72/0xb2 kernel/sched/core.c:4264
[<ffffffe000005570>] ret_from_exception+0x0/0x14
Dumping ftrace buffer:
(ftrace buffer empty)
---[ end trace b5f8f9231dc87dda ]---
The issue comes from the put_user() in schedule_tail
(kernel/sched/core.c) doing the following:
asmlinkage __visible void schedule_tail(struct task_struct *prev)
{
...
if (current->set_child_tid)
put_user(task_pid_vnr(current), current->set_child_tid);
...
}
the put_user() macro causes the code sequence to come out as follows:
1: __enable_user_access()
2: reg = task_pid_vnr(current);
3: *current->set_child_tid = reg;
4: __disable_user_access()
The problem is that we may have a sleeping function as argument which
could clear SR_SUM causing the panic above. This was fixed by
evaluating the argument of the put_user() macro outside the user-enabled
section in commit 285a76bb2cf5 ("riscv: evaluate put_user() arg before
enabling user access")"
In order for riscv to take advantage of unsafe_get/put_XXX() macros and
to avoid the same issue we had with put_user() and sleeping functions we
must ensure code flow can go through switch_to() from within a region of
code with SR_SUM enabled and come back with SR_SUM still enabled. This
patch addresses the problem allowing future work to enable full use of
unsafe_get/put_XXX() macros without needing to take a CSR bit flip cost
on every access. Make switch_to() save and restore SR_SUM. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pkey: Prevent overflow in size calculation for memdup_user()
Number of apqn target list entries contained in 'nr_apqns' variable is
determined by userspace via an ioctl call so the result of the product in
calculation of size passed to memdup_user() may overflow.
In this case the actual size of the allocated area and the value
describing it won't be in sync leading to various types of unpredictable
behaviour later.
Use a proper memdup_array_user() helper which returns an error if an
overflow is detected. Note that it is different from when nr_apqns is
initially zero - that case is considered valid and should be handled in
subsequent pkey_handler implementations.
Found by Linux Verification Center (linuxtesting.org). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix crash in wacom_aes_battery_handler()
Commit fd2a9b29dc9c ("HID: wacom: Remove AES power_supply after extended
inactivity") introduced wacom_aes_battery_handler() which is scheduled
as a delayed work (aes_battery_work).
In wacom_remove(), aes_battery_work is not canceled. Consequently, if
the device is removed while aes_battery_work is still pending, then hard
crashes or "Oops: general protection fault..." are experienced when
wacom_aes_battery_handler() is finally called. E.g., this happens with
built-in USB devices after resume from hibernate when aes_battery_work
was still pending at the time of hibernation.
So, take care to cancel aes_battery_work in wacom_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/ras: Fix CPER handler device confusion
By inspection, cxl_cper_handle_prot_err() is making a series of fragile
assumptions that can lead to crashes:
1/ It assumes that endpoints identified in the record are a CXL-type-3
device, nothing guarantees that.
2/ It assumes that the device is bound to the cxl_pci driver, nothing
guarantees that.
3/ Minor, it holds the device lock over the switch-port tracing for no
reason as the trace is 100% generated from data in the record.
Correct those by checking that the PCIe endpoint parents a cxl_memdev
before assuming the format of the driver data, and move the lock to where
it is required. Consequently this also makes the implementation ready for
CXL accelerators that are not bound to cxl_pci. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt: properly flush XDP redirect lists
We encountered following crash when testing a XDP_REDIRECT feature
in production:
[56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd
40f30).
[56251.601413] ------------[ cut here ]------------
[56251.611357] kernel BUG at lib/list_debug.c:29!
[56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6.
3 #1
[56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE
[56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025
[56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0
[56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48
89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89
[56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246
[56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000
[56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80
[56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18
[56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000
[56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40
[56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000
[56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0
[56251.831365] PKRU: 55555554
[56251.838653] Call Trace:
[56251.845560] <IRQ>
[56251.851943] cpu_map_enqueue.cold+0x5/0xa
[56251.860243] xdp_do_redirect+0x2d9/0x480
[56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en]
[56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en]
[56251.885665] ? cpu_max_write+0x1e/0x100
[56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en]
[56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en]
[56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.944250] __napi_poll+0x2b/0x160
[56251.951155] bpf_trampoline_6442548651+0x79/0x123
[56251.959262] __napi_poll+0x5/0x160
[56251.966037] net_rx_action+0x3d2/0x880
[56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.989262] ? __hrtimer_run_queues+0x162/0x2a0
[56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5
[56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5
[56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en]
[56252.019903] handle_softirqs+0xcf/0x270
[56252.026650] irq_exit_rcu+0x67/0x90
[56252.032933] common_interrupt+0x85/0xa0
[56252.039498] </IRQ>
[56252.044246] <TASK>
[56252.048935] asm_common_interrupt+0x26/0x40
[56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420
[56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae
01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29
[56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202
[56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000
[56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000
[56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e
[56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860
[56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000
[56252.146667] ? cpuidle_enter_state+0xab/0x420
[56252.153909] cpuidle_enter+0x2d/0x40
[56252.160360] do_idle+0x176/0x1c0
[56252.166456
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential deadlock when reconnecting channels
Fix cifs_signal_cifsd_for_reconnect() to take the correct lock order
and prevent the following deadlock from happening
======================================================
WARNING: possible circular locking dependency detected
6.16.0-rc3-build2+ #1301 Tainted: G S W
------------------------------------------------------
cifsd/6055 is trying to acquire lock:
ffff88810ad56038 (&tcp_ses->srv_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x134/0x200
but task is already holding lock:
ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&ret_buf->chan_lock){+.+.}-{3:3}:
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_setup_session+0x81/0x4b0
cifs_get_smb_ses+0x771/0x900
cifs_mount_get_session+0x7e/0x170
cifs_mount+0x92/0x2d0
cifs_smb3_do_mount+0x161/0x460
smb3_get_tree+0x55/0x90
vfs_get_tree+0x46/0x180
do_new_mount+0x1b0/0x2e0
path_mount+0x6ee/0x740
do_mount+0x98/0xe0
__do_sys_mount+0x148/0x180
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&ret_buf->ses_lock){+.+.}-{3:3}:
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_match_super+0x101/0x320
sget+0xab/0x270
cifs_smb3_do_mount+0x1e0/0x460
smb3_get_tree+0x55/0x90
vfs_get_tree+0x46/0x180
do_new_mount+0x1b0/0x2e0
path_mount+0x6ee/0x740
do_mount+0x98/0xe0
__do_sys_mount+0x148/0x180
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (&tcp_ses->srv_lock){+.+.}-{3:3}:
check_noncircular+0x95/0xc0
check_prev_add+0x115/0x2f0
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_signal_cifsd_for_reconnect+0x134/0x200
__cifs_reconnect+0x8f/0x500
cifs_handle_standard+0x112/0x280
cifs_demultiplex_thread+0x64d/0xbc0
kthread+0x2f7/0x310
ret_from_fork+0x2a/0x230
ret_from_fork_asm+0x1a/0x30
other info that might help us debug this:
Chain exists of:
&tcp_ses->srv_lock --> &ret_buf->ses_lock --> &ret_buf->chan_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ret_buf->chan_lock);
lock(&ret_buf->ses_lock);
lock(&ret_buf->chan_lock);
lock(&tcp_ses->srv_lock);
*** DEADLOCK ***
3 locks held by cifsd/6055:
#0: ffffffff857de398 (&cifs_tcp_ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x7b/0x200
#1: ffff888119c64060 (&ret_buf->ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x9c/0x200
#2: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: userfaultfd: fix race of userfaultfd_move and swap cache
This commit fixes two kinds of races, they may have different results:
Barry reported a BUG_ON in commit c50f8e6053b0, we may see the same
BUG_ON if the filemap lookup returned NULL and folio is added to swap
cache after that.
If another kind of race is triggered (folio changed after lookup) we
may see RSS counter is corrupted:
[ 406.893936] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0
type:MM_ANONPAGES val:-1
[ 406.894071] BUG: Bad rss-counter state mm:ffff0000c5a9ddc0
type:MM_SHMEMPAGES val:1
Because the folio is being accounted to the wrong VMA.
I'm not sure if there will be any data corruption though, seems no.
The issues above are critical already.
On seeing a swap entry PTE, userfaultfd_move does a lockless swap cache
lookup, and tries to move the found folio to the faulting vma. Currently,
it relies on checking the PTE value to ensure that the moved folio still
belongs to the src swap entry and that no new folio has been added to the
swap cache, which turns out to be unreliable.
While working and reviewing the swap table series with Barry, following
existing races are observed and reproduced [1]:
In the example below, move_pages_pte is moving src_pte to dst_pte, where
src_pte is a swap entry PTE holding swap entry S1, and S1 is not in the
swap cache:
CPU1 CPU2
userfaultfd_move
move_pages_pte()
entry = pte_to_swp_entry(orig_src_pte);
// Here it got entry = S1
... < interrupted> ...
<swapin src_pte, alloc and use folio A>
// folio A is a new allocated folio
// and get installed into src_pte
<frees swap entry S1>
// src_pte now points to folio A, S1
// has swap count == 0, it can be freed
// by folio_swap_swap or swap
// allocator's reclaim.
<try to swap out another folio B>
// folio B is a folio in another VMA.
<put folio B to swap cache using S1 >
// S1 is freed, folio B can use it
// for swap out with no problem.
...
folio = filemap_get_folio(S1)
// Got folio B here !!!
... < interrupted again> ...
<swapin folio B and free S1>
// Now S1 is free to be used again.
<swapout src_pte & folio A using S1>
// Now src_pte is a swap entry PTE
// holding S1 again.
folio_trylock(folio)
move_swap_pte
double_pt_lock
is_pte_pages_stable
// Check passed because src_pte == S1
folio_move_anon_rmap(...)
// Moved invalid folio B here !!!
The race window is very short and requires multiple collisions of multiple
rare events, so it's very unlikely to happen, but with a deliberately
constructed reproducer and increased time window, it can be reproduced
easily.
This can be fixed by checking if the folio returned by filemap is the
valid swap cache folio after acquiring the folio lock.
Another similar race is possible: filemap_get_folio may return NULL, but
folio (A) could be swapped in and then swapped out again using the same
swap entry after the lookup. In such a case, folio (A) may remain in the
swap cache, so it must be moved too:
CPU1 CPU2
userfaultfd_move
move_pages_pte()
entry = pte_to_swp_entry(orig_src_pte);
// Here it got entry = S1, and S1 is not in swap cache
folio = filemap_get
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: megaraid_sas: Fix invalid node index
On a system with DRAM interleave enabled, out-of-bound access is
detected:
megaraid_sas 0000:3f:00.0: requested/available msix 128/128 poll_queue 0
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28
index -1 is out of range for type 'cpumask *[1024]'
dump_stack_lvl+0x5d/0x80
ubsan_epilogue+0x5/0x2b
__ubsan_handle_out_of_bounds.cold+0x46/0x4b
megasas_alloc_irq_vectors+0x149/0x190 [megaraid_sas]
megasas_probe_one.cold+0xa4d/0x189c [megaraid_sas]
local_pci_probe+0x42/0x90
pci_device_probe+0xdc/0x290
really_probe+0xdb/0x340
__driver_probe_device+0x78/0x110
driver_probe_device+0x1f/0xa0
__driver_attach+0xba/0x1c0
bus_for_each_dev+0x8b/0xe0
bus_add_driver+0x142/0x220
driver_register+0x72/0xd0
megasas_init+0xdf/0xff0 [megaraid_sas]
do_one_initcall+0x57/0x310
do_init_module+0x90/0x250
init_module_from_file+0x85/0xc0
idempotent_init_module+0x114/0x310
__x64_sys_finit_module+0x65/0xc0
do_syscall_64+0x82/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix it accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out
When both the RHBA and RPA FDMI requests time out, fnic reuses a frame to
send ABTS for each of them. On send completion, this causes an attempt to
free the same frame twice that leads to a crash.
Fix crash by allocating separate frames for RHBA and RPA, and modify ABTS
logic accordingly.
Tested by checking MDS for FDMI information.
Tested by using instrumented driver to:
- Drop PLOGI response
- Drop RHBA response
- Drop RPA response
- Drop RHBA and RPA response
- Drop PLOGI response + ABTS response
- Drop RHBA response + ABTS response
- Drop RPA response + ABTS response
- Drop RHBA and RPA response + ABTS response for both of them |
| In the Linux kernel, the following vulnerability has been resolved:
sched/rt: Fix race in push_rt_task
Overview
========
When a CPU chooses to call push_rt_task and picks a task to push to
another CPU's runqueue then it will call find_lock_lowest_rq method
which would take a double lock on both CPUs' runqueues. If one of the
locks aren't readily available, it may lead to dropping the current
runqueue lock and reacquiring both the locks at once. During this window
it is possible that the task is already migrated and is running on some
other CPU. These cases are already handled. However, if the task is
migrated and has already been executed and another CPU is now trying to
wake it up (ttwu) such that it is queued again on the runqeue
(on_rq is 1) and also if the task was run by the same CPU, then the
current checks will pass even though the task was migrated out and is no
longer in the pushable tasks list.
Crashes
=======
This bug resulted in quite a few flavors of crashes triggering kernel
panics with various crash signatures such as assert failures, page
faults, null pointer dereferences, and queue corruption errors all
coming from scheduler itself.
Some of the crashes:
-> kernel BUG at kernel/sched/rt.c:1616! BUG_ON(idx >= MAX_RT_PRIO)
Call Trace:
? __die_body+0x1a/0x60
? die+0x2a/0x50
? do_trap+0x85/0x100
? pick_next_task_rt+0x6e/0x1d0
? do_error_trap+0x64/0xa0
? pick_next_task_rt+0x6e/0x1d0
? exc_invalid_op+0x4c/0x60
? pick_next_task_rt+0x6e/0x1d0
? asm_exc_invalid_op+0x12/0x20
? pick_next_task_rt+0x6e/0x1d0
__schedule+0x5cb/0x790
? update_ts_time_stats+0x55/0x70
schedule_idle+0x1e/0x40
do_idle+0x15e/0x200
cpu_startup_entry+0x19/0x20
start_secondary+0x117/0x160
secondary_startup_64_no_verify+0xb0/0xbb
-> BUG: kernel NULL pointer dereference, address: 00000000000000c0
Call Trace:
? __die_body+0x1a/0x60
? no_context+0x183/0x350
? __warn+0x8a/0xe0
? exc_page_fault+0x3d6/0x520
? asm_exc_page_fault+0x1e/0x30
? pick_next_task_rt+0xb5/0x1d0
? pick_next_task_rt+0x8c/0x1d0
__schedule+0x583/0x7e0
? update_ts_time_stats+0x55/0x70
schedule_idle+0x1e/0x40
do_idle+0x15e/0x200
cpu_startup_entry+0x19/0x20
start_secondary+0x117/0x160
secondary_startup_64_no_verify+0xb0/0xbb
-> BUG: unable to handle page fault for address: ffff9464daea5900
kernel BUG at kernel/sched/rt.c:1861! BUG_ON(rq->cpu != task_cpu(p))
-> kernel BUG at kernel/sched/rt.c:1055! BUG_ON(!rq->nr_running)
Call Trace:
? __die_body+0x1a/0x60
? die+0x2a/0x50
? do_trap+0x85/0x100
? dequeue_top_rt_rq+0xa2/0xb0
? do_error_trap+0x64/0xa0
? dequeue_top_rt_rq+0xa2/0xb0
? exc_invalid_op+0x4c/0x60
? dequeue_top_rt_rq+0xa2/0xb0
? asm_exc_invalid_op+0x12/0x20
? dequeue_top_rt_rq+0xa2/0xb0
dequeue_rt_entity+0x1f/0x70
dequeue_task_rt+0x2d/0x70
__schedule+0x1a8/0x7e0
? blk_finish_plug+0x25/0x40
schedule+0x3c/0xb0
futex_wait_queue_me+0xb6/0x120
futex_wait+0xd9/0x240
do_futex+0x344/0xa90
? get_mm_exe_file+0x30/0x60
? audit_exe_compare+0x58/0x70
? audit_filter_rules.constprop.26+0x65e/0x1220
__x64_sys_futex+0x148/0x1f0
do_syscall_64+0x30/0x80
entry_SYSCALL_64_after_hwframe+0x62/0xc7
-> BUG: unable to handle page fault for address: ffff8cf3608bc2c0
Call Trace:
? __die_body+0x1a/0x60
? no_context+0x183/0x350
? spurious_kernel_fault+0x171/0x1c0
? exc_page_fault+0x3b6/0x520
? plist_check_list+0x15/0x40
? plist_check_list+0x2e/0x40
? asm_exc_page_fault+0x1e/0x30
? _cond_resched+0x15/0x30
? futex_wait_queue_me+0xc8/0x120
? futex_wait+0xd9/0x240
? try_to_wake_up+0x1b8/0x490
? futex_wake+0x78/0x160
? do_futex+0xcd/0xa90
? plist_check_list+0x15/0x40
? plist_check_list+0x2e/0x40
? plist_del+0x6a/0xd0
? plist_check_list+0x15/0x40
? plist_check_list+0x2e/0x40
? dequeue_pushable_task+0x20/0x70
? __schedule+0x382/0x7e0
? asm_sysvec_reschedule_i
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix race between nfsd registration and exports_proc
As of now nfsd calls create_proc_exports_entry() at start of init_nfsd
and cleanup by remove_proc_entry() at last of exit_nfsd.
Which causes kernel OOPs if there is race between below 2 operations:
(i) exportfs -r
(ii) mount -t nfsd none /proc/fs/nfsd
for 5.4 kernel ARM64:
CPU 1:
el1_irq+0xbc/0x180
arch_counter_get_cntvct+0x14/0x18
running_clock+0xc/0x18
preempt_count_add+0x88/0x110
prep_new_page+0xb0/0x220
get_page_from_freelist+0x2d8/0x1778
__alloc_pages_nodemask+0x15c/0xef0
__vmalloc_node_range+0x28c/0x478
__vmalloc_node_flags_caller+0x8c/0xb0
kvmalloc_node+0x88/0xe0
nfsd_init_net+0x6c/0x108 [nfsd]
ops_init+0x44/0x170
register_pernet_operations+0x114/0x270
register_pernet_subsys+0x34/0x50
init_nfsd+0xa8/0x718 [nfsd]
do_one_initcall+0x54/0x2e0
CPU 2 :
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
PC is at : exports_net_open+0x50/0x68 [nfsd]
Call trace:
exports_net_open+0x50/0x68 [nfsd]
exports_proc_open+0x2c/0x38 [nfsd]
proc_reg_open+0xb8/0x198
do_dentry_open+0x1c4/0x418
vfs_open+0x38/0x48
path_openat+0x28c/0xf18
do_filp_open+0x70/0xe8
do_sys_open+0x154/0x248
Sometimes it crashes at exports_net_open() and sometimes cache_seq_next_rcu().
and same is happening on latest 6.14 kernel as well:
[ 0.000000] Linux version 6.14.0-rc5-next-20250304-dirty
...
[ 285.455918] Unable to handle kernel paging request at virtual address 00001f4800001f48
...
[ 285.464902] pc : cache_seq_next_rcu+0x78/0xa4
...
[ 285.469695] Call trace:
[ 285.470083] cache_seq_next_rcu+0x78/0xa4 (P)
[ 285.470488] seq_read+0xe0/0x11c
[ 285.470675] proc_reg_read+0x9c/0xf0
[ 285.470874] vfs_read+0xc4/0x2fc
[ 285.471057] ksys_read+0x6c/0xf4
[ 285.471231] __arm64_sys_read+0x1c/0x28
[ 285.471428] invoke_syscall+0x44/0x100
[ 285.471633] el0_svc_common.constprop.0+0x40/0xe0
[ 285.471870] do_el0_svc_compat+0x1c/0x34
[ 285.472073] el0_svc_compat+0x2c/0x80
[ 285.472265] el0t_32_sync_handler+0x90/0x140
[ 285.472473] el0t_32_sync+0x19c/0x1a0
[ 285.472887] Code: f9400885 93407c23 937d7c27 11000421 (f86378a3)
[ 285.473422] ---[ end trace 0000000000000000 ]---
It reproduced simply with below script:
while [ 1 ]
do
/exportfs -r
done &
while [ 1 ]
do
insmod /nfsd.ko
mount -t nfsd none /proc/fs/nfsd
umount /proc/fs/nfsd
rmmod nfsd
done &
So exporting interfaces to user space shall be done at last and
cleanup at first place.
With change there is no Kernel OOPs. |
