| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pci: Fix get_phb_number() locking
The recent change to get_phb_number() causes a DEBUG_ATOMIC_SLEEP
warning on some systems:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
1 lock held by swapper/1:
#0: c157efb0 (hose_spinlock){+.+.}-{2:2}, at: pcibios_alloc_controller+0x64/0x220
Preemption disabled at:
[<00000000>] 0x0
CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0-yocto-standard+ #1
Call Trace:
[d101dc90] [c073b264] dump_stack_lvl+0x50/0x8c (unreliable)
[d101dcb0] [c0093b70] __might_resched+0x258/0x2a8
[d101dcd0] [c0d3e634] __mutex_lock+0x6c/0x6ec
[d101dd50] [c0a84174] of_alias_get_id+0x50/0xf4
[d101dd80] [c002ec78] pcibios_alloc_controller+0x1b8/0x220
[d101ddd0] [c140c9dc] pmac_pci_init+0x198/0x784
[d101de50] [c140852c] discover_phbs+0x30/0x4c
[d101de60] [c0007fd4] do_one_initcall+0x94/0x344
[d101ded0] [c1403b40] kernel_init_freeable+0x1a8/0x22c
[d101df10] [c00086e0] kernel_init+0x34/0x160
[d101df30] [c001b334] ret_from_kernel_thread+0x5c/0x64
This is because pcibios_alloc_controller() holds hose_spinlock but
of_alias_get_id() takes of_mutex which can sleep.
The hose_spinlock protects the phb_bitmap, and also the hose_list, but
it doesn't need to be held while get_phb_number() calls the OF routines,
because those are only looking up information in the device tree.
So fix it by having get_phb_number() take the hose_spinlock itself, only
where required, and then dropping the lock before returning.
pcibios_alloc_controller() then needs to take the lock again before the
list_add() but that's safe, the order of the list is not important. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: Fix reset error handling
Do not call iavf_close in iavf_reset_task error handling. Doing so can
lead to double call of napi_disable, which can lead to deadlock there.
Removing VF would lead to iavf_remove task being stuck, because it
requires crit_lock, which is held by iavf_close.
Call iavf_disable_vf if reset fail, so that driver will clean up
remaining invalid resources.
During rapid VF resets, HW can fail to setup VF mailbox. Wrong
error handling can lead to iavf_remove being stuck with:
[ 5218.999087] iavf 0000:82:01.0: Failed to init adminq: -53
...
[ 5267.189211] INFO: task repro.sh:11219 blocked for more than 30 seconds.
[ 5267.189520] Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1
[ 5267.189764] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 5267.190062] task:repro.sh state:D stack: 0 pid:11219 ppid: 8162 flags:0x00000000
[ 5267.190347] Call Trace:
[ 5267.190647] <TASK>
[ 5267.190927] __schedule+0x460/0x9f0
[ 5267.191264] schedule+0x44/0xb0
[ 5267.191563] schedule_preempt_disabled+0x14/0x20
[ 5267.191890] __mutex_lock.isra.12+0x6e3/0xac0
[ 5267.192237] ? iavf_remove+0xf9/0x6c0 [iavf]
[ 5267.192565] iavf_remove+0x12a/0x6c0 [iavf]
[ 5267.192911] ? _raw_spin_unlock_irqrestore+0x1e/0x40
[ 5267.193285] pci_device_remove+0x36/0xb0
[ 5267.193619] device_release_driver_internal+0xc1/0x150
[ 5267.193974] pci_stop_bus_device+0x69/0x90
[ 5267.194361] pci_stop_and_remove_bus_device+0xe/0x20
[ 5267.194735] pci_iov_remove_virtfn+0xba/0x120
[ 5267.195130] sriov_disable+0x2f/0xe0
[ 5267.195506] ice_free_vfs+0x7d/0x2f0 [ice]
[ 5267.196056] ? pci_get_device+0x4f/0x70
[ 5267.196496] ice_sriov_configure+0x78/0x1a0 [ice]
[ 5267.196995] sriov_numvfs_store+0xfe/0x140
[ 5267.197466] kernfs_fop_write_iter+0x12e/0x1c0
[ 5267.197918] new_sync_write+0x10c/0x190
[ 5267.198404] vfs_write+0x24e/0x2d0
[ 5267.198886] ksys_write+0x5c/0xd0
[ 5267.199367] do_syscall_64+0x3a/0x80
[ 5267.199827] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 5267.200317] RIP: 0033:0x7f5b381205c8
[ 5267.200814] RSP: 002b:00007fff8c7e8c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 5267.201981] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5b381205c8
[ 5267.202620] RDX: 0000000000000002 RSI: 00005569420ee900 RDI: 0000000000000001
[ 5267.203426] RBP: 00005569420ee900 R08: 000000000000000a R09: 00007f5b38180820
[ 5267.204327] R10: 000000000000000a R11: 0000000000000246 R12: 00007f5b383c06e0
[ 5267.205193] R13: 0000000000000002 R14: 00007f5b383bb880 R15: 0000000000000002
[ 5267.206041] </TASK>
[ 5267.206970] Kernel panic - not syncing: hung_task: blocked tasks
[ 5267.207809] CPU: 48 PID: 551 Comm: khungtaskd Kdump: loaded Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1
[ 5267.208726] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019
[ 5267.209623] Call Trace:
[ 5267.210569] <TASK>
[ 5267.211480] dump_stack_lvl+0x33/0x42
[ 5267.212472] panic+0x107/0x294
[ 5267.213467] watchdog.cold.8+0xc/0xbb
[ 5267.214413] ? proc_dohung_task_timeout_secs+0x30/0x30
[ 5267.215511] kthread+0xf4/0x120
[ 5267.216459] ? kthread_complete_and_exit+0x20/0x20
[ 5267.217505] ret_from_fork+0x22/0x30
[ 5267.218459] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: Fix deadlock when using NCM gadget
The cdns3 driver has the same NCM deadlock as fixed in cdnsp by commit
58f2fcb3a845 ("usb: cdnsp: Fix deadlock issue during using NCM gadget").
Under PREEMPT_RT the deadlock can be readily triggered by heavy network
traffic, for example using "iperf --bidir" over NCM ethernet link.
The deadlock occurs because the threaded interrupt handler gets
preempted by a softirq, but both are protected by the same spinlock.
Prevent deadlock by disabling softirq during threaded irq handler. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/userptr: fix notifier vs folio deadlock
User is reporting what smells like notifier vs folio deadlock, where
migrate_pages_batch() on core kernel side is holding folio lock(s) and
then interacting with the mappings of it, however those mappings are
tied to some userptr, which means calling into the notifier callback and
grabbing the notifier lock. With perfect timing it looks possible that
the pages we pulled from the hmm fault can get sniped by
migrate_pages_batch() at the same time that we are holding the notifier
lock to mark the pages as accessed/dirty, but at this point we also want
to grab the folio locks(s) to mark them as dirty, but if they are
contended from notifier/migrate_pages_batch side then we deadlock since
folio lock won't be dropped until we drop the notifier lock.
Fortunately the mark_page_accessed/dirty is not really needed in the
first place it seems and should have already been done by hmm fault, so
just remove it.
(cherry picked from commit bd7c0cb695e87c0e43247be8196b4919edbe0e85) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_audio: don't let userspace block driver unbind
In the unbind callback for f_uac1 and f_uac2, a call to snd_card_free()
via g_audio_cleanup() will disconnect the card and then wait for all
resources to be released, which happens when the refcount falls to zero.
Since userspace can keep the refcount incremented by not closing the
relevant file descriptor, the call to unbind may block indefinitely.
This can cause a deadlock during reboot, as evidenced by the following
blocked task observed on my machine:
task:reboot state:D stack:0 pid:2827 ppid:569 flags:0x0000000c
Call trace:
__switch_to+0xc8/0x140
__schedule+0x2f0/0x7c0
schedule+0x60/0xd0
schedule_timeout+0x180/0x1d4
wait_for_completion+0x78/0x180
snd_card_free+0x90/0xa0
g_audio_cleanup+0x2c/0x64
afunc_unbind+0x28/0x60
...
kernel_restart+0x4c/0xac
__do_sys_reboot+0xcc/0x1ec
__arm64_sys_reboot+0x28/0x30
invoke_syscall+0x4c/0x110
...
The issue can also be observed by opening the card with arecord and
then stopping the process through the shell before unbinding:
# arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null
Recording WAVE '/dev/null' : Signed 32 bit Little Endian, Rate 48000 Hz, Stereo
^Z[1]+ Stopped arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null
# echo gadget.0 > /sys/bus/gadget/drivers/configfs-gadget/unbind
(observe that the unbind command never finishes)
Fix the problem by using snd_card_free_when_closed() instead, which will
still disconnect the card as desired, but defer the task of freeing the
resources to the core once userspace closes its file descriptor. |
| IdentityIQ 8.4 and all 8.4 patch levels prior to 8.4p2, IdentityIQ 8.3 and all 8.3 patch levels prior to 8.3p5, IdentityIQ 8.2 and all 8.2 patch levels prior to 8.2p8, and all prior versions allow HTTP/HTTPS access to static content in the IdentityIQ application directory that should be protected. |
| A vulnerability has been identified in SICAM GridEdge (Classic) (All versions < V2.7.3). The affected application uses an improperly protected file to import SSH keys. This could allow attackers with access to the filesystem of the host on which SICAM GridEdge runs to inject a custom SSH key to that file. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: xilinx: don't make a sleepable memory allocation from an atomic context
The following issue was discovered using lockdep:
[ 6.691371] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:209
[ 6.694602] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0
[ 6.702431] 2 locks held by swapper/0/1:
[ 6.706300] #0: ffffff8800f6f188 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x4c/0x90
[ 6.714900] #1: ffffffc009a2abb8 (enable_lock){....}-{2:2}, at: clk_enable_lock+0x4c/0x140
[ 6.723156] irq event stamp: 304030
[ 6.726596] hardirqs last enabled at (304029): [<ffffffc008d17ee0>] _raw_spin_unlock_irqrestore+0xc0/0xd0
[ 6.736142] hardirqs last disabled at (304030): [<ffffffc00876bc5c>] clk_enable_lock+0xfc/0x140
[ 6.744742] softirqs last enabled at (303958): [<ffffffc0080904f0>] _stext+0x4f0/0x894
[ 6.752655] softirqs last disabled at (303951): [<ffffffc0080e53b8>] irq_exit+0x238/0x280
[ 6.760744] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G U 5.15.36 #2
[ 6.768048] Hardware name: xlnx,zynqmp (DT)
[ 6.772179] Call trace:
[ 6.774584] dump_backtrace+0x0/0x300
[ 6.778197] show_stack+0x18/0x30
[ 6.781465] dump_stack_lvl+0xb8/0xec
[ 6.785077] dump_stack+0x1c/0x38
[ 6.788345] ___might_sleep+0x1a8/0x2a0
[ 6.792129] __might_sleep+0x6c/0xd0
[ 6.795655] kmem_cache_alloc_trace+0x270/0x3d0
[ 6.800127] do_feature_check_call+0x100/0x220
[ 6.804513] zynqmp_pm_invoke_fn+0x8c/0xb0
[ 6.808555] zynqmp_pm_clock_getstate+0x90/0xe0
[ 6.813027] zynqmp_pll_is_enabled+0x8c/0x120
[ 6.817327] zynqmp_pll_enable+0x38/0xc0
[ 6.821197] clk_core_enable+0x144/0x400
[ 6.825067] clk_core_enable+0xd4/0x400
[ 6.828851] clk_core_enable+0xd4/0x400
[ 6.832635] clk_core_enable+0xd4/0x400
[ 6.836419] clk_core_enable+0xd4/0x400
[ 6.840203] clk_core_enable+0xd4/0x400
[ 6.843987] clk_core_enable+0xd4/0x400
[ 6.847771] clk_core_enable+0xd4/0x400
[ 6.851555] clk_core_enable_lock+0x24/0x50
[ 6.855683] clk_enable+0x24/0x40
[ 6.858952] fclk_probe+0x84/0xf0
[ 6.862220] platform_probe+0x8c/0x110
[ 6.865918] really_probe+0x110/0x5f0
[ 6.869530] __driver_probe_device+0xcc/0x210
[ 6.873830] driver_probe_device+0x64/0x140
[ 6.877958] __driver_attach+0x114/0x1f0
[ 6.881828] bus_for_each_dev+0xe8/0x160
[ 6.885698] driver_attach+0x34/0x50
[ 6.889224] bus_add_driver+0x228/0x300
[ 6.893008] driver_register+0xc0/0x1e0
[ 6.896792] __platform_driver_register+0x44/0x60
[ 6.901436] fclk_driver_init+0x1c/0x28
[ 6.905220] do_one_initcall+0x104/0x590
[ 6.909091] kernel_init_freeable+0x254/0x2bc
[ 6.913390] kernel_init+0x24/0x130
[ 6.916831] ret_from_fork+0x10/0x20
Fix it by passing the GFP_ATOMIC gfp flag for the corresponding
memory allocation. |
| A flaw was found in libvirt. The virStoragePoolObjListSearch function does not return a locked pool as expected, resulting in a race condition and denial of service when attempting to lock the same object from another thread. This issue could allow clients connecting to the read-only socket to crash the libvirt daemon. |
| In the Linux kernel, the following vulnerability has been resolved:
igb: revert rtnl_lock() that causes deadlock
The commit 6faee3d4ee8b ("igb: Add lock to avoid data race") adds
rtnl_lock to eliminate a false data race shown below
(FREE from device detaching) | (USE from netdev core)
igb_remove | igb_ndo_get_vf_config
igb_disable_sriov | vf >= adapter->vfs_allocated_count?
kfree(adapter->vf_data) |
adapter->vfs_allocated_count = 0 |
| memcpy(... adapter->vf_data[vf]
The above race will never happen and the extra rtnl_lock causes deadlock
below
[ 141.420169] <TASK>
[ 141.420672] __schedule+0x2dd/0x840
[ 141.421427] schedule+0x50/0xc0
[ 141.422041] schedule_preempt_disabled+0x11/0x20
[ 141.422678] __mutex_lock.isra.13+0x431/0x6b0
[ 141.423324] unregister_netdev+0xe/0x20
[ 141.423578] igbvf_remove+0x45/0xe0 [igbvf]
[ 141.423791] pci_device_remove+0x36/0xb0
[ 141.423990] device_release_driver_internal+0xc1/0x160
[ 141.424270] pci_stop_bus_device+0x6d/0x90
[ 141.424507] pci_stop_and_remove_bus_device+0xe/0x20
[ 141.424789] pci_iov_remove_virtfn+0xba/0x120
[ 141.425452] sriov_disable+0x2f/0xf0
[ 141.425679] igb_disable_sriov+0x4e/0x100 [igb]
[ 141.426353] igb_remove+0xa0/0x130 [igb]
[ 141.426599] pci_device_remove+0x36/0xb0
[ 141.426796] device_release_driver_internal+0xc1/0x160
[ 141.427060] driver_detach+0x44/0x90
[ 141.427253] bus_remove_driver+0x55/0xe0
[ 141.427477] pci_unregister_driver+0x2a/0xa0
[ 141.428296] __x64_sys_delete_module+0x141/0x2b0
[ 141.429126] ? mntput_no_expire+0x4a/0x240
[ 141.429363] ? syscall_trace_enter.isra.19+0x126/0x1a0
[ 141.429653] do_syscall_64+0x5b/0x80
[ 141.429847] ? exit_to_user_mode_prepare+0x14d/0x1c0
[ 141.430109] ? syscall_exit_to_user_mode+0x12/0x30
[ 141.430849] ? do_syscall_64+0x67/0x80
[ 141.431083] ? syscall_exit_to_user_mode_prepare+0x183/0x1b0
[ 141.431770] ? syscall_exit_to_user_mode+0x12/0x30
[ 141.432482] ? do_syscall_64+0x67/0x80
[ 141.432714] ? exc_page_fault+0x64/0x140
[ 141.432911] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Since the igb_disable_sriov() will call pci_disable_sriov() before
releasing any resources, the netdev core will synchronize the cleanup to
avoid any races. This patch removes the useless rtnl_(un)lock to guarantee
correctness. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: trans_fd/p9_conn_cancel: drop client lock earlier
syzbot reported a double-lock here and we no longer need this
lock after requests have been moved off to local list:
just drop the lock earlier. |
| A flaw was found in the way the "flags" member of the new pipe buffer structure was lacking proper initialization in copy_page_to_iter_pipe and push_pipe functions in the Linux kernel and could thus contain stale values. An unprivileged local user could use this flaw to write to pages in the page cache backed by read only files and as such escalate their privileges on the system. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: fix io_req_post_cqe abuse by send bundle
[ 114.987980][ T5313] WARNING: CPU: 6 PID: 5313 at io_uring/io_uring.c:872 io_req_post_cqe+0x12e/0x4f0
[ 114.991597][ T5313] RIP: 0010:io_req_post_cqe+0x12e/0x4f0
[ 115.001880][ T5313] Call Trace:
[ 115.002222][ T5313] <TASK>
[ 115.007813][ T5313] io_send+0x4fe/0x10f0
[ 115.009317][ T5313] io_issue_sqe+0x1a6/0x1740
[ 115.012094][ T5313] io_wq_submit_work+0x38b/0xed0
[ 115.013223][ T5313] io_worker_handle_work+0x62a/0x1600
[ 115.013876][ T5313] io_wq_worker+0x34f/0xdf0
As the comment states, io_req_post_cqe() should only be used by
multishot requests, i.e. REQ_F_APOLL_MULTISHOT, which bundled sends are
not. Add a flag signifying whether a request wants to post multiple
CQEs. Eventually REQ_F_APOLL_MULTISHOT should imply the new flag, but
that's left out for simplicity. |
| The attacker can use the raft server protocol in an unauthenticated way. The attacker can see the server's resources, including directories and files.
This issue affects Apache Zeppelin: from 0.10.1 up to 0.12.0.
Users are recommended to upgrade to version 0.12.0, which fixes the issue by removing the Cluster Interpreter. |
| SENEC Storage Box V1,V2 and V3 accidentially expose a management UI accessible with publicly known admin credentials. |
| Cortex-A77 cores (r0p0 and r1p0) are affected by erratum 1508412
where software, under certain circumstances, could deadlock a core
due to the execution of either a load to device or non-cacheable memory,
and either a store exclusive or register read of the Physical
Address Register (PAR_EL1) in close proximity.
|
| An information disclosure vulnerability exists in the CtEnumCa() functionality of SoftEther VPN 4.41-9782-beta and 5.01.9674. Specially crafted network packets can lead to a disclosure of sensitive information. An attacker can send packets to trigger this vulnerability. |
| A memory initialization issue was addressed. This issue is fixed in macOS Ventura 13.3, macOS Monterey 12.6.4. A remote attacker may be able to cause unexpected app termination or arbitrary code execution. |
| p2putil.c in iNet wireless daemon (IWD) through 2.15 allows attackers to cause a denial of service (daemon crash) or possibly have unspecified other impact because of initialization issues in situations where parsing of advertised service information fails. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: max3100: Lock port->lock when calling uart_handle_cts_change()
uart_handle_cts_change() has to be called with port lock taken,
Since we run it in a separate work, the lock may not be taken at
the time of running. Make sure that it's taken by explicitly doing
that. Without it we got a splat:
WARNING: CPU: 0 PID: 10 at drivers/tty/serial/serial_core.c:3491 uart_handle_cts_change+0xa6/0xb0
...
Workqueue: max3100-0 max3100_work [max3100]
RIP: 0010:uart_handle_cts_change+0xa6/0xb0
...
max3100_handlerx+0xc5/0x110 [max3100]
max3100_work+0x12a/0x340 [max3100] |
