| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: skip reading rdevs that are not in_sync
When reading bitmap pages from member disks, the code iterates through
all rdevs and attempts to read from the first available one. However,
it only checks for raid_disk assignment and Faulty flag, missing the
In_sync flag check.
This can cause bitmap data to be read from spare disks that are still
being rebuilt and don't have valid bitmap information yet. Reading
stale or uninitialized bitmap data from such disks can lead to
incorrect dirty bit tracking, potentially causing data corruption
during recovery or normal operation.
Add the In_sync flag check to ensure bitmap pages are only read from
fully synchronized member disks that have valid bitmap data. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - reject short ahash digests during instance creation
authencesn requires either a zero authsize or an authsize of at least
4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of
high-order sequence number data at the end of the authenticated data.
While crypto_authenc_esn_setauthsize() already rejects explicit
non-zero authsizes in the range 1..3, crypto_authenc_esn_create()
still copied auth->digestsize into inst->alg.maxauthsize without
validating it. The AEAD core then initialized the tfm's default
authsize from that value.
As a result, selecting an ahash with digest size 1..3, such as
cbcmac(cipher_null), exposed authencesn instances whose default
authsize was invalid even though setauthsize() would have rejected the
same value. AF_ALG could then trigger the ESN tail handling with a
too-short tag and hit an out-of-bounds access.
Reject authencesn instances whose ahash digest size is in the invalid
non-zero range 1..3 so that no tfm can inherit an unsupported default
authsize. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Handle probe errors properly
The probe procedure of setup_card() in caiaq driver doesn't treat the
error cases gracefully, e.g. the error from snd_card_register() calls
snd_card_free() but continues. This would lead to a UAF for the
further calls like snd_usb_caiaq_control_init(), as Berk suggested in
another patch in the link below.
However, the problem is not only that; in general, this function drops
the all error handlings (as it's a void function) although its caller
can propagate an error to snd_probe(), which eventually calls
snd_card_free() as a proper error path. That said, we should treat
each error case in setup_card(), and just return the error code
promptly, which is then handled later as a fatal error in snd_probe().
This patch achieves it by changing the setup_card() to return an error
code. Also, the superfluous snd_card_free() call is removed, too.
Note that card->private_free can be set still safely at returning an
error. All called functions in card_free() have checks of the
unassigned resources or NULL checks. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix potential UAF after skb_unshare() failure
If skb_unshare() fails to unshare a packet due to allocation failure in
rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread())
will be NULL'd out. This will likely cause the call to
trace_rxrpc_rx_done() to oops.
Fix this by moving the unsharing down to where rxrpc_input_call_event()
calls rxrpc_input_call_packet(). There are a number of places prior to
that where we ignore DATA packets for a variety of reasons (such as the
call already being complete) for which an unshare is then avoided.
And with that, rxrpc_input_packet() doesn't need to take a pointer to the
pointer to the packet, so change that to just a pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: fix use-after-free on unbind
The SPI subsystem frees the controller and any subsystem allocated
driver data as part of deregistration (unless the allocation is device
managed).
Take another reference before deregistering the controller so that the
driver data is not freed until the driver is done with it. |
| Flowise through 3.1.4 contains a sandbox escape vulnerability that allows authenticated users to execute OS commands by abusing allowlisted langchain and mammoth modules when ALLOW_BUILTIN_DEP=true. Attackers can submit JavaScript to /api/v1/node-custom-function that writes a file into the mammoth package via LocalFileStore and requires it, escaping vm2 as the Flowise process user. |
| A vulnerability was found in 37954679 cak-filemanagement-system up to 5e6433246475e66462e1fea980688de96a049297. This affects the function mysqli_query of the file admin/save_student.php. Performing a manipulation of the argument date/department/subject/forwarded_to/action_taken_by/section/password results in sql injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Zuke is a code-first, strongly typed build automation system for Deno. Prior to 1.10.0, the @zuke/gh githubWorkflow(...) gate correlates a dispatched workflow run using only a display-title marker that is visible in the workflow run list and can be copied by another dispatcher. In configurations where the external workflow repository grants workflow_dispatch permission to a party not equally trusted by the releasing repository, an attacker can dispatch a run with the marker and cause the gate to adopt its conclusion without verifying the event, ref, or creation window. A passing substituted run can authorize an unvalidated release, while a failed or cancelled run can block a valid release, and the persisted adopted run ID preserves the substitution across build resume. This issue is fixed in version 1.10.0. |
| In server mode pgAdmin 4 resolves a server's password file, SSL certificate, key, CRL and SSH tunnel identity file relative to the user's storage directory, but get_complete_file_path() only stripped leading slashes before joining the two. A path such as "../<another user>/.pgpass", set through the server dialog, the REST API or a servers.json import, therefore named another user's file, and connecting used that user's saved passwords, client certificate or SSH key. The sslkeylogfile connection parameter was passed to libpq unchanged, so a path outside storage let libpq create or append a file as the account running pgAdmin.
make_conninfo() also quoted connection parameter values but not their names, so a crafted parameter name could smuggle additional keyword=value pairs past these checks.
The fix requires the resolved path, with symbolic links followed, to stay inside the user's storage directory or the named shared storage directory, confines sslkeylogfile the same way, and accepts only exact libpq keywords as connection parameter names. A refused path or keyword is reported instead of letting libpq fall back to a default.
This issue affects pgAdmin 4: before 9.19. |
| When a server in pgAdmin 4 had no password file, client certificate or client key configured, or the configured one could not be found, pgAdmin left the parameter out of the connection and libpq fell back to the defaults of the operating-system account running pgAdmin: ~/.pgpass, ~/.postgresql/postgresql.crt and postgresql.key, or PGPASSFILE, PGSSLCERT and PGSSLKEY. In server mode any user could therefore connect to a server with the service account's saved passwords or client certificate, and supplying only a copy of its public certificate was enough for libpq to pair it with the service account's private key. A pg_service.conf entry, or a maintenance database name read as a connection string by pg_dumpall, could bring the same files back for the utilities.
The fix gives each of these parameters a value in server mode, the user's own file or otherwise a path that can never be opened, in the connection string, in the environment of the utilities and in the --dbname connection string that ranks above a service entry. Desktop mode is unchanged.
This issue affects pgAdmin 4: before 9.19. |
| libpq looks a connection service up in the service file of the operating-system account running pgAdmin 4, and an entry there can hold a password or name a password file or client certificate. In server mode any user could set a server's Service, or a "service" connection parameter, to one of those entries and connect with its credentials. A PGPASSWORD or PGSERVICE variable set for that account was likewise used by libpq for every connection without a value of its own and passed on to the utilities, and pg_dumpall read a maintenance database name such as "service=..." as a connection string.
The fix adds the SERVER_MODE_ALLOWED_SERVICES setting, empty by default: in server mode only a listed service can be used, the servicefile parameter is refused, and PGPASSWORD and PGSERVICE are removed from pgAdmin's environment at startup. The allowlist is checked again on the final connection string, and the pg_dumpall database name is wrapped as a connection string.
This issue affects pgAdmin 4: before 9.19. |
| When a pgAdmin 4 connection was not meant to use a Kerberos user's delegated credentials, pgAdmin removed KRB5CCNAME from its environment, so the Kerberos library fell back to the default credential cache, or a client keytab, of the operating-system account running pgAdmin. libpq then answered any server that asked for GSSAPI authentication with that account's ticket, whatever user name the pgAdmin user gave, so in server mode any user could connect as the service account's Kerberos principal; gssencmode=disable did not prevent it. On Windows, SSPI used the service account's logon in the same way. psql was also started with pgAdmin's environment, which could hold another user's credential cache while that user was connecting.
The fix points KRB5CCNAME and KRB5_CLIENT_KTNAME at a file that cannot exist except while a Kerberos-authenticated user connects with Kerberos, and gives every other connection, psql and the utilities require_auth=!gss,!sspi and gssencmode=disable, checked on the final connection string. require_auth needs libpq 16 or later.
This issue affects pgAdmin 4: before 9.19. |
| pgAdmin 4 runs pg_dump, pg_restore, pg_dumpall and psql from the binary path a user sets in their preferences. In server mode the binary path was refused only when it lay under the per-user storage directory (STORAGE_DIR), not under a SHARED_STORAGE directory, which ordinary users can upload files to. A user could therefore upload an executable to shared storage, point their binary path at it, and have pgAdmin run it as the operating-system account running pgAdmin. On POSIX, files created through pgAdmin are not executable, so this is exploitable where any file with an executable name can run, such as Windows server mode.
The fix checks the binary path against every SHARED_STORAGE directory as well, after expanding $DIR, collapsing ".." and resolving symbolic links, compares directories in a way a different spelling on a case-insensitive filesystem cannot bypass, refuses a path containing a NUL, and enforces the check wherever binary paths are resolved, including for the PSQL tool.
This issue affects pgAdmin 4: before 9.19. |
| pgAdmin 4 opens SSH tunnels with the sshtunnel library but gave it neither host_pkey_directories nor ssh_config_file, so it always loaded the unencrypted private keys in ~/.ssh of the operating-system account running pgAdmin, read that account's ~/.ssh/config (IdentityFile, User, HostName, ProxyCommand) for the tunnel host, and could use its ssh-agent. In server mode any user could therefore configure a tunnel to a host that accepts the service account's key, with no credentials of their own or with an identity file that did not exist in their storage, and reach it as that account.
The fix makes tunnels in server mode use only the identity file or password the user configured: the service account's keys, configuration and agent are no longer used, and an identity file that cannot be found in the user's storage is reported instead of falling back to ~/.ssh. Desktop mode is unchanged.
This issue affects pgAdmin 4: before 9.19. |
| Starlet versions from 0.20 before 0.33 for Perl allow CPU exhaustion via regular expression backtracking when decoding chunked request bodies.
A chunk-size line is matched as a run of hex digits, then .* and a CRLF. A run followed by a bare LF and then a CRLF can never match, and the engine retries the match once for each digit, so the time taken grows with the square of the run length. Nothing limits the length of the run, which can span several reads.
A remote attacker can occupy a worker for about a minute of CPU time with one 128 KiB request, before the application is called. |
| Starlet versions before 0.33 for Perl allow a request declaring a large Content-Length to kill a worker by exhausting memory.
The request body is read in a loop that asks sysread for all of the remaining declared length at once. Perl grows the read buffer to that size before any data arrives, so a length larger than available memory makes the worker exit with an uncatchable out of memory error before the application is called.
A remote attacker can force a worker restart with each request of a few bytes. |
| An out-of-bounds write vulnerability in the Qt Framework assimp scene import plugin of the Qt3D module. |
| A flaw was found in the SAML XML processing component of Keycloak, an open-source identity and access management solution. The issue occurs when the server parses XML documents containing excessively long dateTime or duration values. Because these strings are not properly validated before processing, the XML parser consumes excessive CPU time. An unauthenticated remote attacker can exploit this by sending specially crafted SAML requests to the server, leading to high CPU utilization and a denial of service for all users. |
| A security vulnerability was discovered in SUSE Rancher Fleet's cluster registration flow, in Fleet versions before 0.12, 0.13.0 up to 0.13.17, 0.14.0 up to 0.14.12, 0.15.0 up t o 0.15.17 and 0.16.0 up to 0.16.3. The cluster identity claimed by a registration request was accepted without being bound to the registration token that the request was made with. As a result, a registration request could be associated with a managed cluster that was originally registered with a different registration token. |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: SQR). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). |
