| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cleartext storage of sensitive information in the variables feature in Devolutions PowerShell Universal 2026.2.2 and earlier allows a local actor with file system access to read secret values via secret variables stored in cleartext on disk when no vault is selected. |
| In the Linux kernel, the following vulnerability has been resolved:
srcu: Don't queue workqueue handlers to never-online CPUs
While an srcu_struct structure is in the midst of switching from CPU-0
to all-CPUs state, it can attempt to invoke callbacks for CPUs that
have never been online. Worse yet, it can attempt in invoke callbacks
for CPUs that never will be online, even including imaginary CPUs not in
cpu_possible_mask. This can cause hangs on s390, which is not set up to
deal with workqueue handlers being scheduled on such CPUs. This commit
therefore causes Tree SRCU to refrain from queueing workqueue handlers
on CPUs that have not yet (and might never) come online.
Because callbacks are not invoked on CPUs that have not been
online, it is an error to invoke call_srcu(), synchronize_srcu(), or
synchronize_srcu_expedited() on a CPU that is not yet fully online.
However, it turns out to be less code to redirect the callbacks
from too-early invocations of call_srcu() than to warn about such
invocations. This commit therefore also redirects callbacks queued on
not-yet-fully-online CPUs to the boot CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it
In iwl_mld_remove_link, the link->fw_id is saved at the beginning of the
function so we have it after we freed the link.
But the link pointer can be NULL, and is not checked when the fw_id is
stored.
Fix it by simply freeing the link at the end of the function.
fFixes: 0e66a39f4f0e ("wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()") |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: driver: Check ACPI_COMPANION() against NULL during probe
Since every platform driver can be forced to match a device that doesn't
match its list of device IDs because of device_match_driver_override(),
platform drivers that rely on the existence of a device's ACPI companion
object should verify its presence.
Accordingly, add requisite ACPI_COMPANION() or ACPI_HANDLE() checks
against NULL to 13 platform drivers handling core ACPI devices.
Also change the value returned by the ACPI thermal zone driver when
the device's ACPI companion is not present to -ENODEV for consistency
with the other drivers. |
| ArcadeDB versions before 26.7.3 contain an information disclosure vulnerability in the MCP get_server_settings tool that leaks the arcadedb.ha.clusterToken in cleartext. Attackers with MCP access can retrieve the cluster token and use it with X-ArcadeDB-Cluster-Token and X-ArcadeDB-Forwarded-User headers to impersonate root and achieve full server compromise. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines
With CONFIG_CALL_DEPTH_TRACKING enabled on an x86 retbleed-affected platform
(eg: Skylake), with retbleed=stuff, registering a dynamic ftrace trampoline
crashes on the first call into the traced function:
BUG: unable to handle page fault for address: ffff88817ae18880
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 4b53067 P4D 4b53067 PUD 0
Oops: Oops: 0002 [#1] SMP PTI
CPU: 3 UID: 0 PID: 187 Comm: usleep Not tainted 7.0.10 #243 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
Code: 24 78 00 00 00 00 48 89 ea 48 89 54 24 20 48 8b b4 24 b8 00 00 00 48 8b bc 24 b0 00 00 00 48 89 bc 24 80 00 00 00 48 83 ef 05 <65> 48 c1 3d 1f a8 b6 02 05 48 8b 15 f6 00 00 00 4c 89 3c 24 4c 89
Call Trace:
<TASK>
? find_held_lock
? exc_page_fault
? lock_release
? __x64_sys_clock_nanosleep
? lockdep_hardirqs_on_prepare
? trace_hardirqs_on
__x64_sys_clock_nanosleep
do_syscall_64
? exc_page_fault
? call_depth_return_thunk
entry_SYSCALL_64_after_hwframe
...
Kernel panic - not syncing: Fatal exception
This small reproducer allows to easily trigger the crash:
# echo 'p __x64_sys_clock_nanosleep' > /sys/kernel/tracing/kprobe_events
# echo 1 > /sys/kernel/tracing/events/kprobes/p___x64_sys_clock_nanosleep_0/enable
# usleep 1
Monitoring the crash under GDB points to the exact instruction in charge of
incrementing the call depth:
sarq $5, %gs:__x86_call_depth(%rip)
This instruction matches the one inserted by the ftrace_regs_caller from
ftrace_64.S. This emitted code was likely working fine until the introduction
of
59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()"):
it has made the call depth accounting addressing relative to $rip, instead of
being based on an absolute address.
As this code exact location depends on where the trampoline lives in memory,
the corresponding displacement needs to be adjusted at runtime to actually
correctly find the per-cpu __x86_call_depth value, otherwise the targeted
address is wrong, leading to the page fault seen above.
Fix the %rip-relative displacement of the copied CALL_DEPTH_ACCOUNT
instruction (from ftrace_regs_caller) by calling text_poke_apply_relocation(),
as it is done for example by the x86 BPF JIT compiler through
x86_call_depth_emit_accounting(). This corrects both CALL_DEPTH_ACCOUNT slots,
in ftrace_caller and ftrace_regs_caller.
[ bp: Massage. ] |
| In the Linux kernel, the following vulnerability has been resolved:
Input: elan_i2c - validate firmware size before use
Ensure that the firmware file is large enough to contain the expected
number of pages and the signature (which resides at the end of the
firmware blob) before accessing them to prevent potential out-of-bounds
reads. |
| In the Linux kernel, the following vulnerability has been resolved:
power: reset: linkstation-poweroff: fix use-after-free in the linkstation_poweroff_init()
Move of_node_put(dn) after the of_match_node() call, which still needs
the node pointer. The node reference is correctly released after use. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: region: fix use-after-free in child_regions_with_firmware()
Move of_node_put(child_region) after the error print to avoid accessing
freed memory when pr_err() references child_region.
[ Yilun: Fix the Fixes tag ] |
| In the Linux kernel, the following vulnerability has been resolved:
pwrseq: core: fix use-after-free in pwrseq_debugfs_seq_next()
pwrseq_debugfs_seq_next() declares 'next' with __free(put_device),
which causes put_device() to be called on the returned pointer when
the variable goes out of scope. This results in a use-after-free
since the seq_file framework receives a pointer whose reference has
already been dropped.
Simply removing __free(put_device) would fix the UAF but would leak
the reference acquired by bus_find_next_device(), as stop() only
calls up_read(&pwrseq_sem) and never releases the device reference.
Fix this by making the reference counting consistent across all
seq_file callbacks, matching the standard pattern used by PCI and
SCSI:
- start(): use get_device() so it returns a referenced pointer.
- next(): explicitly put_device(curr) to release the previous
device's reference (no NULL check needed - the seq_file framework
only calls next() while the previous return was non-NULL).
- stop(): put_device(data) to release the last iterated device's
reference, with a NULL guard since stop() may be called with NULL
when start() returned NULL or next() reached end-of-sequence. |
| In the Linux kernel, the following vulnerability has been resolved:
NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR
When BAR_PEER_SPAD and BAR_CONFIG share one PCI BAR, the module teardown
path ends up calling pci_iounmap() on the same iomem with some offset,
which is unnecessary and triggers a kernel warning like the following:
Trying to vunmap() nonexistent vm area (0000000069a5ffe8)
WARNING: mm/vmalloc.c:3470 at vunmap+0x58/0x68, CPU#5: modprobe/2937
[...]
Call trace:
vunmap+0x58/0x68 (P)
iounmap+0x34/0x48
pci_iounmap+0x2c/0x40
ntb_epf_pci_remove+0x44/0x80 [ntb_hw_epf]
pci_device_remove+0x48/0xf8
device_remove+0x50/0x88
device_release_driver_internal+0x1c8/0x228
driver_detach+0x50/0xb0
bus_remove_driver+0x74/0x100
driver_unregister+0x34/0x68
pci_unregister_driver+0x34/0xa0
ntb_epf_pci_driver_exit+0x14/0xfe0 [ntb_hw_epf]
[...]
Fix it by unmapping only when PEER_SPAD and CONFIG use difference bars. |
| Redis before 8.8.0, in the unusual case where an authenticated attacker can execute RESTORE, allows remote code execution via a RESTORE payload where the same NACK (pending entry) is referenced by more than one consumer, because deleting both consumers via XGROUP DELCONSUMER leads to a double free. NOTE: this issue exists because of an incomplete fix for CVE-2026-25243. |
| Knot Resolver before 6.4.1 allows remote code execution via a heap-based buffer overflow in the DoQ (DNS-over-QUIC) receive path. |
| ArcadeDB before 26.7.3 binds the real LocalDatabase object into JavaScript trigger contexts with HostAccess.ALL, allowing schema-admins to call getSecurity().createUser() without permission checks. Attackers with UPDATE_SCHEMA permission can create triggers that execute JavaScript to create server-wide admin users, escalating privileges beyond their authorization level. |
| luci-app-adblock-fast before 1.2.4-4 contains a stored cross-site scripting vulnerability in the blocklist name field that allows lower-privileged users to inject active HTML. When an administrator views the AdBlock Fast status page, the injected payload executes in the administrator's browser under the LuCI origin. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse-uring: fix EFAULT clobber in fuse_uring_commit
copy_from_user() returns the number of bytes not copied as an unsigned
residual on failure (1..sizeof(struct fuse_out_header)). fuse_uring_commit
stores that residual in ssize_t err, sets req->out.h.error to -EFAULT,
then jumps to out: with err still holding the positive residual.
err = copy_from_user(&req->out.h, &ent->headers->in_out,
sizeof(req->out.h));
if (err) {
req->out.h.error = -EFAULT;
goto out; /* err is the positive residual */
}
...
out:
fuse_uring_req_end(ent, req, err);
fuse_uring_req_end() then runs
if (error)
req->out.h.error = error;
which overwrites the just-assigned -EFAULT with the positive residual.
FUSE callers such as fuse_simple_request() test err < 0 to detect
failure, so the positive value is interpreted as success and the
caller proceeds with an uninitialised or partial req->out.args.
Fix by assigning err = -EFAULT in the failure branch before jumping
to out, so fuse_uring_req_end() receives a negative errno and sets
req->out.h.error to -EFAULT. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: re-lock request before returning from fuse_ref_folio()
fuse_ref_folio() unlocks the request but does not re-lock it before
returning. fuse_chan_abort() can end the request and the async end
callback (eg fuse_writepage_free()) can free the args while the
subsequent copy chain logic after fuse_ref_folio() accesses them,
leading to use-after-free issues.
Fix this by locking the request in fuse_ref_folio() before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx-lpi2c: mark I2C adapter when hardware is powered down
On some i.MX platforms, certain I2C client drivers keep a periodic
workqueue which continues to trigger I2C transfers.
During system suspend/resume, there exists a time window between:
- suspend_noirq and the system entering suspend
- the system starting to resume and resume_noirq
In this window, the I2C controller resources such as clock and pinctrl
may already be disabled or not yet restored.
If a workqueue triggers an I2C transfer in this period, the driver
attempts to access I2C registers while the hardware resources are
unavailable, which may lead to system hang.
Mark the I2C adapter as suspended during noirq suspend and block new
transfers until resume, ensuring that I2C transfers are only issued
when hardware resources are available. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix adapter deregistration race
Adapters can be looked up by their id using i2c_get_adapter() which
takes a reference to the embedded struct device.
Remove the adapter from the IDR before tearing it down during
deregistration (and on registration failure) to make sure its resources
are not accessed after having been freed (e.g. the device name). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: guest_memfd: Treat memslot binding offset+size as unsigned values
When binding a memslot to a guest_memfd file, treat the offset and size as
unsigned values to fix a bug where the sum of the two can result in a false
negative when checking for overflow against the size of the file. Passing
unsigned values also avoids relying on somewhat obscure checks in other
flows for safety, and tracks the offset and size as they are intended to be
tracked, as unsigned values.
On 64-bit kernels, the number of pages a memslot contains and thus the size
(and offset) of its guest_memfd binding are unsigned 64-bit values. Taking
the offset+size as an loff_t instead of a uoff_t inadvertently converts
the unsigned value to a signed value if the offset and/or size is massive.
Locally storing the offset and size as signed values is benign in and of
itself (though even that is *extremely* difficult to discern), but
operating on their sum is not.
For the offset, KVM explicitly checks against a negative value, which might
seem like a bug as KVM could incorrectly reject a legitimate binding, but
that's not actually the case as KVM_CREATE_GUEST_MEMFD takes a signed value
for its size, i.e. a would-be-negative offset is also greater than the
maximum possible size of any guest_memfd file.
Regarding the size, while KVM lacks an explicit check for a negative value,
i.e. seemingly has a flawed overflow check, KVM restricts the number of
pages in a single memslot to the largest positive signed 32-bit value:
if (id < KVM_USER_MEM_SLOTS &&
(mem->memory_size >> PAGE_SHIFT) > KVM_MEM_MAX_NR_PAGES)
return -EINVAL;
and so that maximum "size" will ever be is 0x7fffffff000.
The sum of the two is, however, problematic. While the size is restricted
by KVM's memslot logic, the offset is not, i.e. the offset is completely
unchecked until the "offset + size > i_size_read(inode)" check. If the
offset is the (nearly) largest possible _positive_ value, then adding size
to the offset can result in a signed, negative 64-bit value. When compared
against the size of the file (guaranteed to be positive), the negative sum
is always smaller, and KVM incorrectly allows the absurd offset.
Opportunistically add missing includes in kvm_mm.h (instead of relying on
its parents). |
