| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: Drop the lock in skb_may_tx_timestamp()
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: fix NULL dereference on q->elevator in blk_mq_elv_switch_none
After grabbing q->sysfs_lock, q->elevator may become NULL because of
elevator switch.
Fix the NULL dereference on q->elevator by checking it with lock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Avoid NULL dereference in dc_dmub_srv error paths
In dc_dmub_srv_log_diagnostic_data() and
dc_dmub_srv_enable_dpia_trace().
Both functions check:
if (!dc_dmub_srv || !dc_dmub_srv->dmub)
and then call DC_LOG_ERROR() inside that block.
DC_LOG_ERROR() uses dc_dmub_srv->ctx internally. So if
dc_dmub_srv is NULL, the logging itself can dereference a
NULL pointer and cause a crash.
Fix this by splitting the checks.
First check if dc_dmub_srv is NULL and return immediately.
Then check dc_dmub_srv->dmub and log the error only when
dc_dmub_srv is valid.
Fixes the below:
../display/dc/dc_dmub_srv.c:962 dc_dmub_srv_log_diagnostic_data() error: we previously assumed 'dc_dmub_srv' could be null (see line 961)
../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_enable_dpia_trace() error: we previously assumed 'dc_dmub_srv' could be null (see line 1166) |
| In the Linux kernel, the following vulnerability has been resolved:
md: make rdev_addable usable for rcu mode
Our testcase trigger panic:
BUG: kernel NULL pointer dereference, address: 00000000000000e0
...
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 85 Comm: kworker/2:1 Not tainted 6.16.0+ #94
PREEMPT(none)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Workqueue: md_misc md_start_sync
RIP: 0010:rdev_addable+0x4d/0xf0
...
Call Trace:
<TASK>
md_start_sync+0x329/0x480
process_one_work+0x226/0x6d0
worker_thread+0x19e/0x340
kthread+0x10f/0x250
ret_from_fork+0x14d/0x180
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in: raid10
CR2: 00000000000000e0
---[ end trace 0000000000000000 ]---
RIP: 0010:rdev_addable+0x4d/0xf0
md_spares_need_change in md_start_sync will call rdev_addable which
protected by rcu_read_lock/rcu_read_unlock. This rcu context will help
protect rdev won't be released, but rdev->mddev will be set to NULL
before we call synchronize_rcu in md_kick_rdev_from_array. Fix this by
using READ_ONCE and check does rdev->mddev still alive. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: WARN and clear role.invalid when creating a child shadow page
Explicitly clear role.invalid when deriving a child shadow page's role from
its parent to harden against bugs elsewhere in KVM, as violating KVM's
invariant that invalid pages are NOT on the list of active MMU pages leads
to use-after-free due to __kvm_mmu_prepare_zap_page() using list_add()
instead of list_move() when processing an invalid shadow page, i.e. makes a
bad situation far worse.
Yell loudly if the parent is invalid, as it means KVM has missed a validity
check, i.e. KVM is attempting to map memory using an invalid/obsolete root,
but continue on as the child is otherwise still a valid shadow page.
==================================================================
BUG: KASAN: slab-use-after-free in __kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm]
Write of size 8 at addr ff11000153dd1368 by task repro/853
CPU: 1 UID: 1000 PID: 853 Comm: repro Not tainted 7.2.0-rc2-3aec122bdcaf-next-vm #5 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x4b/0x70
print_report+0x153/0x49c
kasan_report+0xbc/0xf0
__kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm]
mmu_alloc_root+0x141/0x320 [kvm]
kvm_mmu_load+0x612/0x20f0 [kvm]
kvm_arch_vcpu_ioctl_run+0x3dd5/0x6150 [kvm]
kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm]
__x64_sys_ioctl+0x131/0x1b0
do_syscall_64+0x67/0x5f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Allocated by task 853:
kasan_save_stack+0x20/0x40
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x5f/0x70
kmem_cache_alloc_noprof+0xfe/0x2e0
__kvm_mmu_topup_memory_cache+0x135/0x530 [kvm]
paging64_page_fault+0x318/0x1e30 [kvm]
kvm_mmu_do_page_fault+0x21d/0x630 [kvm]
kvm_mmu_page_fault+0x18c/0x17b0 [kvm]
kvm_arch_vcpu_ioctl_run+0x1f35/0x6150 [kvm]
kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm]
__x64_sys_ioctl+0x131/0x1b0
do_syscall_64+0x67/0x5f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 853:
kasan_save_stack+0x20/0x40
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kmem_cache_free+0xe2/0x400
kvm_mmu_commit_zap_page.part.0+0x1e2/0x310 [kvm]
kvm_mmu_free_roots+0x283/0x560 [kvm]
kvm_arch_vcpu_ioctl_run+0x33c8/0x6150 [kvm]
kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm]
__x64_sys_ioctl+0x131/0x1b0
do_syscall_64+0x67/0x5f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| undici's WebSocket client crashes the whole Node.js process during the opening handshake when a server responds with a subprotocol that the client never requested. A default WebSocket connection sends no subprotocol, but if the server's 101 response includes a Sec-WebSocket-Protocol header, undici dereferences a null value while checking it against the requested list and throws an uncaught TypeError. Because that code runs inside a microtask with no surrounding error handling, the exception propagates and terminates the process under Node's default behavior, instead of gracefully failing the connection as required by the WebSocket protocol. Any application that opens a WebSocket to an attacker-controlled or compromised server, or over a plaintext connection subject to a machine-in-the-middle, can be crashed remotely without authentication in the default configuration. This affects undici versions from 6.7.0 up to 6.28.1, from 7.0.0 up to 7.29.1, and from 8.0.0 up to 8.10.2. Users should upgrade to undici 6.28.1, 7.29.1, or 8.10.2. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: reject an unclaimed class value in security_get_classes()
security_get_classes() sizes an array by p_classes.nprim and fills it at
value - 1, so a class value the policy never defines leaves a NULL.
sel_make_classes() passes every entry to sel_make_dir(), reaching the same
d_alloc_name() dereference as the permission array. The class symbol table
is allowed to be sparse (policydb_class_isvalid() exists to absorb that),
but this getter builds its own array straight from the hash table and has
no such predicate.
Fail the lookup when a value went unclaimed instead of handing out the
NULL. Conforming policies define every class they declare and are
unaffected. |
| CVE-2026-55401 is a null dereference vulnerability on the load-balancing
sub-system of Secure Access servers prior to 14.57. Attackers can send
an unauthenticated packet to a Secure Access server with load balancing
enabled, which results in the internal load balancer crashing. After a
successful attack, the Secure Access server is still able to accept
connections and is still able to issue a failover to connected clients. https://www.first.org/cvss/calculator/4.0#CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:L/SC:N/SI:N/SA:L |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: require every boolean value to be defined
p_bools.nprim comes from the policy image independently of how many
booleans follow it, and cond_index_bool() fills bool_val_to_struct[] at
value - 1, so a count larger than the values present leaves NULL entries.
Every user of that array then walks it by index and dereferences each
entry: cond_evaluate_expr() on the access-vector path,
security_get_bools() and security_get_bool_value() behind selinuxfs, and
security_set_bools(). A sparse class value is absorbed by
policydb_class_isvalid() and its siblings; booleans have no such
predicate, and no consumer that could use one.
Reject a boolean value that no boolean defines, once, where the array is
built. Conforming policies define every boolean they declare and are
unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix NULL pointer dereference in nvmet_execute_identify_nslist()
When a host issues an Identify command with CNS 07h (Active Namespace ID
List for a specific I/O Command Set), nvmet_execute_identify_nslist() is
called with match_css set. The command-set filter dereferences req->ns,
but this handler never calls nvmet_req_find_ns(), so req->ns is always
NULL (nvmet_req_init() resets it to NULL). As soon as an enabled
namespace with an NSID greater than the requested value exists,
req->ns->csi dereferences a NULL pointer and oopses.
Besides the crash, the comparison is logically wrong: to filter the list
by command set it must test the command set of the namespace being
iterated, not a single fixed value. Use the loop variable ns->csi. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: drop ESP-in-TCP packets with no ingress device
ESP-in-TCP receives records through the TCP strparser. handle_esp()
restores skb->dev from the saved skb_iif before passing the packet into
the XFRM input path.
Queued TCP data can be processed after the original ingress device has
been removed, for example during veth or net namespace teardown. In that
case dev_get_by_index_rcu() returns NULL. The XFRM IPv4 and IPv6 input
paths both expect skb->dev to be valid while building the route lookup,
so queued ESP-in-TCP data can dereference a NULL device.
Drop the packet if the saved ingress device can no longer be resolved.
Such a packet can no longer be routed through the normal XFRM receive
path, and this preserves the existing behaviour for packets whose ingress
device still exists. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: nintendo: register input device after capabilities are set
input_register_device() exposes the device to userspace immediately.
In joycon_input_create() it was called before joycon_config_rumble()
configures the FF_RUMBLE capability and the memless force-feedback
device, so a concurrent EVIOCSFF could dereference a NULL dev->ff.
Registering early also means the initial udev event lacks button and
axis information, which can make input managers ignore the device.
Move input_register_device() to the end of joycon_input_create(), after
all capabilities, the IMU input device and the force-feedback callbacks
have been configured. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: asus: fix missing hid_is_usb() check
to_usb_interface() can only be used on a hid_device whose parent is really
USB; uhid can create devices that identify as being on BUS_USB, but don't
actually have a USB parent.
Fix the use of to_usb_interface() without a hid_is_usb() check.
I have verified that it is currently possible to trigger a kernel splat due
to this bug in an ASAN build, and that this commit fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/iommufd: Fix NULL pointer deref in iommufd_ioas_change_process when racing with iopt_map_file_pages
iommufd_ioas_change_process() iterates every IOAS area while only
holding every IOAS iova_rwsem, so it assumes every area has a non-NULL
pages pointer. That assumption can be false when it runs concurrently
with iopt_map_file_pages().
iopt_map_pages() executes in two phases. It first creates the area and
inserts it into the interval tree under iova_rwsem, with area->pages
still NULL. It then drops iova_rwsem and later fills area->pages
under domains_rwsem. This leaves a window between area creation and
area->pages fill where a concurrent iommufd_ioas_change_process()
can observe the area and dereference a NULL area->pages pointer,
leading to a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 00000000000000c0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 4b655067 P4D 4b655067 PUD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 11841 Comm: syz.1.628 Not tainted 7.1.0 #3 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:iommufd_ioas_change_process+0x419/0xd50 drivers/iommu/iommufd/ioas.c:538
Code: 48 89 c3 48 85 c0 0f 84 cc 00 00 00 e8 10 f5 cb fd 48 8d 7b 68 e8 a7 b5 eb fd 48 8b 6b 68 48 8d bd c0 00 00 00 e8 17 b2 eb fd <8b> ad c0 00 00 00 bf 01 00 00 00 89 ee e8 85 ef cb fd 83 fd 01 74
RSP: 0018:ffffc90015c17d28 EFLAGS: 00010246
RAX: ffff8880186d5328 RBX: ffff88801d25e240 RCX: 0000000080000000
RDX: 00000000000002d7 RSI: ffffffff83ba9e10 RDI: 00000000000000c0
RBP: 0000000000000000 R08: ffffffff8e781eb8 R09: 0000000000000000
R10: 00000000000000c0 R11: ffffffff83ba9e29 R12: ffff88802e216008
R13: ffff88802e216000 R14: 0000000000000001 R15: 0000000000000000
FS: 00007f4aea3f66c0(0000) GS:ffff8880b1fa1000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c0 CR3: 000000004b75c000 CR4: 0000000000350ef0
Call Trace:
<TASK>
iommufd_fops_ioctl+0x287/0x400 drivers/iommu/iommufd/main.c:533
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x120/0x170 fs/ioctl.c:583
x64_sys_call+0x1092/0x1fb0 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x10a/0x680 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f4aec1a82bd
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f4aea3f6018 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f4aec436090 RCX: 00007f4aec1a82bd
RDX: 0000200000000180 RSI: 0000000000003b92 RDI: 0000000000000003
RBP: 00007f4aec250295 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f4aec436128 R14: 00007f4aec436090 R15: 00007ffd04ef23e0
</TASK>
Modules linked in:
CR2: 00000000000000c0
---[ end trace 0000000000000000 ]---
RIP: 0010:iommufd_ioas_change_process+0x419/0xd50 drivers/iommu/iommufd/ioas.c:538
Code: 48 89 c3 48 85 c0 0f 84 cc 00 00 00 e8 10 f5 cb fd 48 8d 7b 68 e8 a7 b5 eb fd 48 8b 6b 68 48 8d bd c0 00 00 00 e8 17 b2 eb fd <8b> ad c0 00 00 00 bf 01 00 00 00 89 ee e8 85 ef cb fd 83 fd 01 74
RSP: 0018:ffffc90015c17d28 EFLAGS: 00010246
RAX: ffff8880186d5328 RBX: ffff88801d25e240 RCX: 0000000080000000
RDX: 00000000000002d7 RSI: ffffffff83ba9e10 RDI: 00000000000000c0
RBP: 0000000000000000 R08: ffffffff8e781eb8 R09: 0000000000000000
R10: 00000000000000c0 R11: ffffffff83ba9e29 R12: ffff88802e216008
R13: ffff88802e216000 R14: 0000000000000001 R15: 0000000000000000
FS: 00007f4aea3f66c0(000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept
rfcomm_sock_recvmsg() completes a deferred setup by calling
rfcomm_dlc_accept() without holding any RFCOMM lock:
if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) {
rfcomm_dlc_accept(d);
return 0;
}
and rfcomm_dlc_accept() dereferences the session on its first line:
struct sock *sk = d->session->sock->sk;
Every other path that touches d->session runs under rfcomm_mutex:
rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(),
rfcomm_dlc_send_rpn(), and the RFCOMM thread through
rfcomm_process_sessions(). rfcomm_connect_ind() is even documented as
"called under rfcomm_lock()". This call site is the only one that skips
it.
The RFCOMM_DEFER_SETUP bit looks like it serialises the accept against
teardown, since __rfcomm_dlc_close() returns early when it wins the
test_and_clear. But rfcomm_recv_disc() forces the state first:
d->state = BT_CLOSED;
__rfcomm_dlc_close(d, err);
and the early return only covers BT_CONNECT, BT_CONFIG, BT_OPEN and
BT_CONNECT2. With the state already BT_CLOSED that switch does not
match, the bit is never consulted, and __rfcomm_dlc_close() falls
through to rfcomm_dlc_unlink(), which sets d->session = NULL.
So a remote DISC on a deferred dlc clears the session while leaving
RFCOMM_DEFER_SETUP set. The next recvmsg() then passes the
test_and_clear and dereferences a NULL session. No timing window is
needed: once the DISC has been processed, the dereference is
unconditional.
Give rfcomm_dlc_accept() the same shape as rfcomm_dlc_open() and
rfcomm_dlc_close(): an exported wrapper that takes rfcomm_mutex and
re-checks the session, around a __rfcomm_dlc_accept() that the two
in-core callers, which already hold the mutex, keep using.
Reproduced on a KASAN + PROVE_LOCKING kernel with a BR/EDR peer emulated
over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the
RFCOMM PSM, starts a session, opens a dlc on a channel bound with
BT_DEFER_SETUP, and sends DISC after the socket is accepted. recv() on
the accepted socket then hits:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:rfcomm_dlc_accept+0x54/0x350
Call Trace:
rfcomm_sock_recvmsg+0x1cd/0x230
sock_recvmsg+0x166/0x1c0
__sys_recvfrom+0x20d/0x300
0x10 is the offset of sock in struct rfcomm_session. With this patch the
same run completes with recv() returning 0 and no report, and lockdep
stays quiet, confirming rfcomm_mutex is still taken before lock_sock on
this path as it is on the thread side. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mchp-ipc-sbi: Add null check for devm_kasprintf()
Add a check to see if devm_kasprintf() is not NULL in
mchp_ipc_get_cluster_aggr_irq(), returning -ENOMEM if the function
failed. |
| Tapo C100/C101 V5 contains a null pointer dereference vulnerability in the RTSP service. An attacker on the local network can send specially crafted requests that cause the service to dereference an invalid pointer, resulting in a service crash and device reboot. Successful exploitation can disrupt live video streaming functionality and cause a temporary denial-of-service condition. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: huawei: fix missing hid_is_usb() check
to_usb_interface() can only be used on a hid_device whose parent is really
USB; uhid can create devices that identify as being on BUS_USB, but don't
actually have a USB parent.
Fix the use of to_usb_interface() without a hid_is_usb() check.
I have verified that it is currently possible to trigger a kernel splat due
to this bug in an ASAN build, and that this commit fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mtk-jpeg: cancel workqueue on release for supported platforms only
Since a recent fix the mtk_jpeg_release function cancels any pending
or running work present in the driver workqueue using
cancel_work_sync function.
Currently, only the multicore based variants use this workqueue and they
have the jpeg_worker platform data field initialized with a workqueue
callback function. For the others, this field value remain NULL by
default.
The cancel_work_sync function is unconditionally called in
mtk_jpeg_release function, even for the variants that do not use the
workqueue. This call generates a WARN_ON print in __flush_work because
the workqueue callback function presence check fails in __flush_work
function (used by cancel_work_sync).
So, to avoid these warnings, call cancel_work_sync only if a workqueue
callback is defined in platform data. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()
hci_abort_conn() read hci_skb_event(hdev->sent_cmd) when a connection
was pending, but hdev->sent_cmd can be NULL while req_status is still
HCI_REQ_PEND, leading to a NULL pointer dereference and a general
protection fault from the hci_rx_work() receive path.
Instead of inspecting hdev->sent_cmd, track the in-flight create
connection command with a new per-connection HCI_CONN_CREATE flag and
route all cancellation through hci_cancel_connect_sync(), which
dispatches to a dedicated per-type cancel function. The create command
is in exactly one of two states: still queued, or in flight. The cancel
function holds cmd_sync_work_lock across the whole decision: the worker
takes this lock to dequeue every entry, so while it is held a queued
command cannot start running and an in-flight command cannot complete
and let the next command become pending. This keeps the flag test and
hci_cmd_sync_cancel() atomic with respect to the worker, so a queued
command is simply dequeued, and an in-flight command owned by this
connection is cancelled without the risk of cancelling an unrelated
command that became pending in the meantime. CIS uses the same flag
mechanism via HCI_CONN_CREATE_CIS but cannot be dequeued per-connection.
hci_acl_create_conn_sync() and hci_le_create_conn_sync() clear
HCI_CONN_CREATE after the create command completes, but the command
status handler can free conn via hci_conn_del() (for example when the
controller rejects the connection) while the worker is still blocked on
the connection complete event. Hold a reference on conn across the
create command so the flag can be cleared without a use-after-free. |
