| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: bound element ID read when checking non-inheritance
cfg80211_is_element_inherited() reads the first data octet of the
candidate element (id = elem->data[0]) to look it up in an extension
non-inheritance list. It does so after testing elem->id, but without
verifying that the element actually has a data octet. A zero-length
extension element (WLAN_EID_EXTENSION with length 0) therefore makes it
read one octet past the end of the element.
_ieee802_11_parse_elems_full() runs this check for every element of a
frame once a non-inheritance context exists -- e.g. while parsing a
per-STA profile of a Multi-Link element in a (re)association response,
or a non-transmitted BSS profile -- so a crafted frame from an AP can
trigger a one-octet slab-out-of-bounds read during element parsing:
BUG: KASAN: slab-out-of-bounds in cfg80211_is_element_inherited
Read of size 1 ... in net/wireless/scan.c
Return early (treat the element as inherited) when an extension element
carries no data, mirroring the existing handling of empty ID lists.
The bug was found by fuzzing ieee802_11_parse_elems_full() under KASAN. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Validate length for CCA ECC private key requests
cca_ecc2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Fix buffer over-read in cca_cipher2protkey
Add validation of both the actual key buffer size and token length
fields in all the cca_check_sec*token() functions. Additionally check
in cca_gencipherkey() for possible underflow with returned key size.
The CCA token structures contain user-controlled len fields that
were used in operations without proper validation against both the
actual buffer size and minimum token structure size. An attacker
could set this field larger than the actual buffer size, leading to
reading beyond buffer boundaries. This may result in a kernel crash or
exposure of memory via sending this as part of a request down to the
crypto card. Also an attacker could have used a very small len value
and thus enforce a buffer under-run which may produce similar effects
as a over-read.
So now a key must
- key buf length must be at least sizeof the token struct
- the key len field inside the token must fit into the range of
sizeof key token struct ... key buf length |
| A vulnerability was identified in Baicells EG3661M BaiCE_BQ6_2.0.5.3_NA. This impacts an unknown function of the file /cgi-bin/luci of the component LuCI Web Interface. Such manipulation of the argument MaxHops/Timeout/Size leads to os command injection. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in feedmob fm-mcp-servers 0.0.3. Affected by this vulnerability is the function downloadReport of the file src/smadex-reporting/src/index.ts of the component Download Endpoint. The manipulation of the argument downloadUrl leads to server-side request forgery. The attack can only be performed from a local environment. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: bound EDID block reads to the response buffer
virtio_get_edid_block() validates the read offset only against the
device-supplied resp->size field, never against the fixed-size resp->edid
array. The EDID block index is driven by the device-supplied extension
count, so a malicious virtio-gpu backend can advertise a large size
together with a high block count and read far past the array into adjacent
kernel memory, which is then surfaced in the parsed EDID (an out-of-bounds
read / info leak).
Also reject any read whose end exceeds the size of the edid array.
Conforming EDID responses stay within the array and are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vm: Fix BO prefetch with CONSULT_MEM_ADVISE_PREF_LOC
When prefetch region is DRM_XE_CONSULT_MEM_ADVISE_PREF_LOC for a BO VMA,
the code used it as an index into region_to_mem_type[], causing an
out-of-bounds access since the value is -1.
Resolve the preferred location for BO VMAs directly: local VRAM on dGFX
(using the BO's tile placement) or system memory on iGPU.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
v2:
-Fix null dereference
(cherry picked from commit d9a4906ac03be9f6ed3f3b45c56c866b867fd75b) |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix DMA direction for NPU mailbox buffer
airoha_npu_send_msg() always maps the mailbox buffer with DMA_TO_DEVICE,
but some callers expect the NPU to write response data back into the
same buffer:
- airoha_npu_wlan_msg_get() (NPU_OP_GET): NPU writes response into
the buffer, then the caller reads it via memcpy()
- airoha_npu_ppe_stats_setup() (NPU_OP_SET): NPU writes back
npu_stats_addr field in the response
On non-cache-coherent architectures like EN7581 (Cortex-A53 without
hardware cache coherency for NPU DMA), DMA_TO_DEVICE unmap is a no-op
— it does not invalidate the CPU cache. If the NPU-written cache line
is still present in the CPU cache when the caller reads the buffer,
the CPU observes stale data instead of the NPU response.
This is a timing-sensitive bug: small mailbox buffers (~24 bytes)
typically fit in a single cache line and may survive in the cache
until the caller reads them, producing silent data corruption rather
than a crash. The bug is more likely to trigger when the caller reads
the response immediately after dma_unmap_single() without intervening
cache-evicting operations.
Fix by using DMA_BIDIRECTIONAL for both map and unmap, which ensures
dma_unmap_single() invalidates the CPU cache on non-coherent systems.
The mailbox buffers are small so there is no performance concern. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: clear mode callbacks after failed mode setup
xfrm_state_gc_task can run long after a failed IPTFS state setup. In the
reproduced case, __xfrm_init_state() cached x->mode_cbs, IPTFS setup
returned -ENOMEM before publishing mode_data, and the temporary module
reference from xfrm_get_mode_cbs() was dropped immediately. The dead state
then kept x->mode_cbs until deferred GC ran after xfrm_iptfs had been
unloaded.
Clear x->mode_cbs when mode init or clone fails before publishing
mode_data. Those states never installed mode-specific state or the
long-term IPTFS module pin, so deferred GC has nothing mode-specific to
destroy and must not retain a callback table pointer past the temporary
lookup reference.
The buggy scenario involves two paths, with each column showing the order
within that path:
failed setup path:
1. cache x->mode_cbs
2. mode setup fails before mode_data
3. drop the temporary module ref
4. dead state keeps x->mode_cbs cached
GC/unload path:
1. xfrm_state_put() queues GC work
2. xfrm_iptfs unloads later
3. xfrm_state_gc_task runs
4. GC dereferences stale x->mode_cbs
This also covers the failed clone path where clone_state() returns before
publishing mode_data.
Validation reproduced this kernel report:
Kernel panic - not syncing: Fatal exception
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
failslab_stacktrace_filter matched xfrm_iptfs frames
ack_error=-12
FAULT_INJECTION: forcing a failure
BUG: unable to handle page fault
Workqueue: events xfrm_state_gc_task
RIP: xfrm_state_gc_task+0x142/0x650
Modules linked in: esp4_offload xfrm_user [last unloaded: xfrm_iptfs]
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mad: Drop unmatched RMPP responses before reassembly
Kernel-handled RMPP receive processing starts reassembly for active
DATA responses before the response is matched to an outstanding send.
The normal match happens later, after ib_process_rmpp_recv_wc() has
either assembled a complete message or consumed the segment.
That ordering lets an unsolicited response that routes to a kernel
RMPP agent by the high TID bits allocate or extend RMPP receive state
before the full TID and source address are checked against a real
request. A reordered burst can therefore reach the receive-side
insertion path even though the response would not match any send.
For kernel-handled RMPP DATA responses, require the existing
ib_find_send_mad() match before entering RMPP reassembly. The matcher
already checks the full TID, management class and source address/GID
against the agent wait, backlog and in-flight send lists. If there is
no match, drop the response without creating RMPP state.
This leaves the RMPP window behavior unchanged and only rejects
responses that have no corresponding request. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: require CAP_NET_ADMIN in the device netns for changelink
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the sticky underlay netns vxlan->net. They differ once the device is
created in or moved to a netns other than the one the request runs in.
The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev),
so a caller privileged there but not in vxlan->net can rewrite a vxlan
device whose underlay lives in vxlan->net.
vxlan_changelink() validates and applies the new configuration against
vxlan->net (vxlan_config_validate(vxlan->net, ...)) and can reopen the
underlay socket in that netns, so the same reasoning as the tunnel
changelink series applies here.
Gate vxlan_changelink() with rtnl_dev_link_net_capable(), at the top of
the op before any attribute is parsed, matching ipgre_changelink() and
the rest of the "require CAP_NET_ADMIN in the device netns for
changelink" series.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| An authentication issue was addressed with improved state management. This issue is fixed in macOS Sequoia 15.7.9, macOS Sonoma 14.8.9, macOS Tahoe 26.6.1. An attacker on the network may be able to authenticate to Screen Sharing without valid credentials. |
| CVE-2026-55402 is an out of bounds read vulnerability in Secure Access
servers prior to version 14.57. Attackers with an ‘in the middle’
position can send specially crafted data to a server causing a
persistent denial of service. |
| Previously, pathological inputs could close an unescaped '/' early, allowing for attack-controlled data to inject arbitrary content, potentially leading to XSS. |
| A weakness has been identified in itsourcecode Hospital Management System 1.0. This issue affects some unknown processing of the file viewdoctortimings.php. Executing a manipulation of the argument delid can lead to sql injection. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. |
| A security flaw has been discovered in eyaushev swagger-testcase-mcp 5babb27c951fb404bc2b25ec80593616e49054e5. This vulnerability affects the function loadSource of the file src/utils/swagger-parser.ts of the component fetch_swagger. Performing a manipulation results in server-side request forgery. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: tcp: unregister sysctl before tearing down listen socket
rds_tcp_exit_net() frees the per-netns RDS TCP listen socket via
rds_tcp_kill_sock() before unregistering the per-netns sysctl table. Since
rds_tcp_skbuf_handler() derives the netns from
rtn->rds_tcp_listen_sock->sk, a concurrent sysctl write can race with
netns teardown and dereference the freed socket/sk.
KASAN reports the race as:
BUG: KASAN: slab-use-after-free in rds_tcp_skbuf_handler+0x2aa/0x2e0
rds_tcp_skbuf_handler net/rds/tcp.c:721
proc_sys_call_handler fs/proc/proc_sysctl.c
vfs_write fs/read_write.c
__x64_sys_pwrite64 fs/read_write.c
Fix this by unregistering the RDS TCP sysctl table before calling
rds_tcp_kill_sock(). unregister_net_sysctl_table() prevents new sysctl
handlers from starting and waits for in-flight handlers to finish, so
the listen socket can then be released safely. The fix was tested
against the linked reproducer. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix MCIA register buffer overflow on 32 dword reads
The MCIA register can return up to 32 dwords (128 bytes) when the device
advertises the mcia_32dwords capability, but struct
mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just
12 dwords (48 bytes) of data.
mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then
memcpy()s that many bytes out of the register, potentially reading past
the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this
is caught as a buffer overflow while reading the module EEPROM via
ethtool:
detected buffer overflow in memcpy
kernel BUG at lib/string_helpers.c:1048!
RIP: 0010:fortify_panic+0x13/0x20
Call Trace:
mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core]
mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core]
mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core]
eeprom_prepare_data+0xf3/0x170
ethnl_default_doit+0xf1/0x3b0
Extend the mcia_reg layout to 32 dwords. |
| A malicious GOPROXY was previously capable of forging up to two sumdb tiles that allow for a requested module to bypass the GOSUMDB check and persist attacker-controlled module content to a local Go module cache. This attack allows for a malicious GOPROXY to serve malicious module content that cannot be detected by evaluating the transparency log. All tiles are now correctly verified against their parents. In order to determine if you have been affected: rm -r go.sum go.work.sum vendor/ && go mod tidy |
| A vulnerability was identified in Raisecom Communication Command and Dispatch Management Platform up to 7.6.5. This affects an unknown part of the file /app/users/getpwd.php. Such manipulation of the argument sip leads to sql injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
