| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Juniper Junos OS 12.1X44 before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R9, 12.3X48 before 12.3X48-D15, 13.2 before 13.2R7, 13.2X51 before 13.2X51-D35, 13.2X52 before 13.2X52-D25, 13.3 before 13.3R6, 14.1R3 before 14.1R3-S2, 14.1 before 14.1R4, 14.1X53 before 14.1X53-D12, 14.1X53 before 14.1X53-D16, 14.1X55 before 14.1X55-D25, 14.2 before 14.2R2, and 15.1 before 15.1R1 allows remote attackers to cause a denial of service (mbuf and connection consumption and restart) via a large number of requests that trigger a TCP connection to move to the LAST_ACK state when there is more data to send. |
| Juniper Junos OS 12.1X44 before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R9, 12.3X48 before 12.3X48-D10, 13.2 before 13.2R7, 13.3 before 13.3R5, 14.1R3 before 14.1R3-S2, 14.1 before 14.1R4, 14.2 before 14.2R2, and 15.1 before 15.1R1 allows remote attackers to cause a denial of service (NULL pointer dereference and RDP crash) via a large number of BGP-VPLS advertisements with updated BGP local preference values. |
| The BFD daemon in Juniper Junos OS 12.1X44 before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R10, 12.3X48 before 12.3X48-D15, 13.2 before 13.2R8, 13.3 before 13.3R6, 14.1 before 14.1R5, 14.1X50 before 14.1X50-D85, 14.1X55 before 14.1X55-D20, 14.2 before 14.2R3, 15.1 before 15.1R1, and 15.1X49 before 15.1X49-D10 allows remote attackers to cause a denial of service (bfdd crash and restart) or execute arbitrary code via a crafted BFD packet. |
| The Juniper MX Series routers with Junos 13.3R3 through 13.3Rx before 13.3R6, 14.1 before 14.1R4, 14.1X50 before 14.1X50-D70, and 14.2 before 14.2R2, when configured as a broadband edge (BBE) router, allows remote attackers to cause a denial of service (jpppd crash and restart) by sending a crafted PAP Authenticate-Request after the PPPoE Discovery and LCP phase are complete. |
| Juniper Junos 12.1X44 before 12.1X44-D45, 12.1X46 before 12.1X46-D25, 12.1X47 before 12.1X47-D15, 12.3 before 12.3R9, 13.1 before 13.1R4-S3, 13.2 before 13.2R6, 13.3 before 13.3R5, 14.1 before 14.1R3, and 14.2 before 14.2R1 does not properly handle double quotes in authorization attributes in the TACACS+ configuration, which allows local users to bypass the security policy and execute commands via unspecified vectors. |
| Juniper JunosE before 13.3.3p0-1, 14.x before 14.3.2, and 15.x before 15.1.0, when DEBUG severity icmpTraffic logging is enabled, allows remote attackers to cause a denial of service (SRP reset) via a crafted ICMP packet to the (1) interface or (2) loopback IP address, which triggers a processor exception in ip_RxData_8. |
| The SRX Network Security Daemon (nsd) in Juniper SRX Series services gateways with Junos 12.1X44 before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, and 12.3X48 before 12.3X48-D15 allows remote DNS servers to cause a denial of service (crash) via a crafted DNS response. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on SRX Series, and MX Series with SPC3 allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
When an affected device receives specific valid TCP traffic, the pfe crashes and restarts leading to a momentary but complete service outage.
This issue affects Junos OS:
21.2 releases from 21.2R3-S5 before 21.2R3-S6.
This issue does not affect earlier or later releases. |
| A Use After Free vulnerability in command processing of Juniper Networks Junos OS on MX Series allows a local, authenticated attacker to cause the broadband edge service manager daemon (bbe-smgd) to crash upon execution of specific CLI commands, creating a Denial of Service (DoS) condition. The process crashes and restarts automatically.
When specific CLI commands are executed, the bbe-smgd daemon attempts to write into an area of memory (mgd socket) that was already closed, causing the process to crash. This process manages and controls the configuration of broadband subscriber sessions and services. While the process is unavailable, additional subscribers will not be able to connect to the device, causing a temporary Denial of Service condition.
This issue only occurs if Graceful Routing Engine Switchover (GRES) and Subscriber Management are enabled.
This issue affects Junos OS:
* All versions before 20.4R3-S5,
* from 21.1 before 21.1R3-S4,
* from 21.2 before 21.2R3-S3,
* from 21.3 before 21.3R3-S5,
* from 21.4 before 21.4R3-S5,
* from 22.1 before 22.1R3,
* from 22.2 before 22.2R3,
* from 22.3 before 22.3R2; |
| A Missing Release of Memory after Effective Lifetime vulnerability in Juniper Networks Junos OS on MX Series allows an unauthenticated adjacent attacker to cause a Denial-of-Service (DoS).
In a subscriber management scenario continuous subscriber logins will trigger a memory leak and eventually lead to an FPC crash and restart.
This issue affects Junos OS on MX Series:
* All version before 21.2R3-S6,
* 21.4 versions before 21.4R3-S6,
* 22.1 versions before 22.1R3-S5,
* 22.2 versions before 22.2R3-S3,
* 22.3 versions before 22.3R3-S2,
* 22.4 versions before 22.4R3,
* 23.2 versions before 23.2R2. |
| A Missing Authentication for Critical Function vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series with SPC3, and SRX Series allows an unauthenticated network-based attacker to cause limited impact to the integrity or availability of the device.
If a device is configured with IPsec authentication algorithm hmac-sha-384 or hmac-sha-512, tunnels are established normally but for traffic traversing the tunnel no authentication information is sent with the encrypted data on egress, and no authentication information is expected on ingress. So if the peer is an unaffected device transit traffic is going to fail in both directions. If the peer is an also affected device transit traffic works, but without authentication, and configuration and CLI operational commands indicate authentication is performed.
This issue affects Junos OS:
* All versions before 20.4R3-S7,
* 21.1 versions before 21.1R3,
* 21.2 versions before 21.2R2-S1, 21.2R3,
* 21.3 versions before 21.3R1-S2, 21.3R2. |
| Juniper Junos Space before 13.1R1.6, as used on the JA1500 appliance and in other contexts, does not properly implement role-based access control, which allows remote authenticated users to modify the configuration by leveraging the read-only privilege, aka PR 863804. |
| Cross-site scripting (XSS) vulnerability in the web-based interface in Juniper Junos Space before 13.1R1.6, as used on the JA1500 appliance and in other contexts, allows remote attackers to inject arbitrary web script or HTML via unspecified vectors, aka PR 884469. |
| Juniper Junos 10.4 before 10.4S13, 11.4 before 11.4R7-S1, 12.1 before 12.1R5-S3, 12.1X44 before 12.1X44-D20, and 12.1X45 before 12.1X45-D10 on the SRX1400, SRX3400, and SRX3600 does not properly initialize memory locations used during padding of Ethernet packets, which allows remote attackers to obtain sensitive information by reading packet data, aka PR 829536, a related issue to CVE-2003-0001. |
| J-Web in Juniper Junos before 10.4R13, 11.4 before 11.4R7, 12.1R before 12.1R6, 12.1X44 before 12.1X44-D15, 12.1x45 before 12.1X45-D10, 12.2 before 12.2R3, 12.3 before 12.3R2, and 13.1 before 13.1R3 allow remote attackers to bypass the cross-site request forgery (CSRF) protection mechanism and hijack the authentication of administrators for requests that (1) create new administrator accounts or (2) have other unspecified impacts. |
| Cross-site scripting (XSS) vulnerability in the help page in Juniper Secure Access (SA) with IVE OS before 7.1r13, 7.2.x before 7.2r7, and 7.3.x before 7.3r2 allows remote attackers to inject arbitrary web script or HTML via the WWHSearchWordsText parameter. |
| flowd in Juniper Junos 10.4 before 10.4S14, 11.2 and 11.4 before 11.4R6-S2, and 12.1 before 12.1R6 on SRX devices, when certain Application Layer Gateways (ALGs) are enabled, allows remote attackers to cause a denial of service (daemon crash) via crafted TCP packets, aka PRs 727980, 806269, and 835593. |
| The kernel in Juniper Junos 10.4 before 10.4R14, 11.4 before 11.4R8, 11.4X27 before 11.4X27.43, 12.1 before 12.1R6, 12.1X44 before 12.1X44-D20, 12.2 before 12.2R4, and 12.3 before 12.3R2, in certain VLAN configurations with unrestricted arp-resp and proxy-arp settings, allows remote attackers to cause a denial of service (device crash) via a crafted ARP request, aka PR 842091. |
| Cross-site scripting (XSS) vulnerability in Juniper SmartPass WLAN Security Management before 7.7 MR3 and 8.0 before MR2 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| Juniper Junos 10.4 before 10.4S15, 11.4 before 11.4R9, 11.4X27 before 11.4X27.44, 12.1 before 12.1R7, 12.1X44 before 12.1X44-D20, 12.1X45 before 12.1X45-D15, 12.2 before 12.2R6, 12.3 before 12.3R3, 13.1 before 13.1R3, and 13.2 before 13.2R1, when Proxy ARP is enabled on an unnumbered interface, allows remote attackers to perform ARP poisoning attacks and possibly obtain sensitive information via a crafted ARP message. |
