Export limit exceeded: 386418 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 386418 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22943 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63927 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: Fix use after free in debug code We're not allowed to dereference "urb" after calling usb_hcd_giveback_urb() so save the urb->status ahead of time. | ||||
| CVE-2026-63939 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Compute the correct max length of the in-GHCB scratch area When setting the length of the GHCB scratch area, and the area is in the GHCB shared buffer, set the effective length of the scratch area to the max possible size given the start of the guest-provided pointer, and the end of the shared buffer. The code was "fine" when first introduced, as KVM doesn't consult the length of the buffer when emulating MMIO, because the passed in @len always specifies the *max* size required. But for PSC requests, the incoming @len is just the minimum length (to process the header), and KVM needs to know the full size of the scratch area to avoid buffer overflows (spoiler alert). Opportunistically rename @len => @min_len to better reflect its role. | ||||
| CVE-2026-63949 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: auxdisplay: line-display: fix OOB read on zero-length message_store() linedisp_display() unconditionally reads msg[count - 1] before checking whether count is zero, so a write of zero bytes to the message sysfs attribute hits msg[-1]: write(fd, "", 0); -> message_store(..., buf, count=0) -> linedisp_display(linedisp, buf, count=0) -> msg[count - 1] == '\n' ; OOB read The kernfs write buffer for that store is a 1-byte allocation (kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0), so msg[-1] is a 1-byte read before the slab object. On a KASAN-enabled kernel this trips an out-of-bounds report and panics; on stock kernels it silently reads adjacent slab data and, if that byte happens to be '\n', the following count-- wraps ssize_t 0 to -1 and is then passed to kmemdup_nul(). linedisp_display() is reached from the message_store() sysfs callback (drivers/auxdisplay/line-display.c message attribute, mode 0644) and from the in-tree initial-message setup with count == -1, so the OOB path is only userspace-triggerable via zero-byte writes; vfs_write() does not short-circuit on count == 0 and kernfs_fop_write_iter() dispatches the store callback regardless. Guard the trailing-newline trim with a count check. The existing if (!count) block then takes the clear-display path unchanged. Affects every auxdisplay driver that registers via linedisp_register() / linedisp_attach(): ht16k33, max6959, img-ascii-lcd, seg-led-gpio. | ||||
| CVE-2026-63955 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: do not trigger BUG() on BH disabled context __get_vm_area_node() currently triggers a BUG() if in_interrupt() returns true. However, in_interrupt() also reports true when BH are disabled. The bridge code can call rhashtable_lookup_insert_fast() with bottom halves disabled: __vlan_add() -> br_fdb_add_local() spin_lock_bh(&br->hash_lock); <-- Disable BH -> fdb_add_local() -> fdb_create() -> rhashtable_lookup_insert_fast() -> kvmalloc() -> vmalloc() -> __get_vm_area_node() -> BUG_ON(in_interrupt()) spin_unlock_bh(&br->hash_lock) this triggers the BUG() despite the caller not being in NMI or hard IRQ context. Replace the in_interrupt() check with in_nmi() || in_hardirq(). | ||||
| CVE-2026-63961 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: validate count before reading Status Update VDO A broken/malicious device can send the incorrect count for a status update VDO, which will cause the kernel to read uninitialized stack data and send it off elsewhere. Fix this up by correctly verifying the count for the update object. | ||||
| CVE-2026-63985 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: eeprom: add more safeties to EEPROM Netlink fallback The Netlink fallback path for reading module EEPROM (fallback_set_params()) validates that offset < eeprom_len, but does not check that offset + length stays within eeprom_len. The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has always enforced both bounds: if (eeprom.offset + eeprom.len > total_len) return -EINVAL; This could lead to surprises in both drivers and device FW. Add the missing offset + length validation to fallback_set_params(), mirroring the ioctl. Similarly - ethtool core in general, and ethtool_get_any_eeprom() in particular tries to zero-init all buffers passed to the drivers to avoid any extra work of zeroing things out. eeprom_fallback() uses a plain kmalloc(), change it to zalloc. | ||||
| CVE-2026-63988 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bridge: Fix sleep in atomic context in sysfs path Since the start of the git history, brport_store() always acquired the bridge lock. Back then this decision made sense: The bridge lock protects the STP state of the bridge and its ports and at that time the function was only used by two STP related attributes (cost and priority). Nowadays, brport_store() processes a lot more attributes and most of them do not need the bridge lock: * Bridge flags: Only require RTNL. Read locklessly by the data path. Annotations can be added in net-next. * FDB port flushing: Only requires the FDB lock. * Multicast attributes: Only require the multicast lock. * Group forward mask: Only requires RTNL. Read locklessly by the data path. Annotations can be added in net-next. * Backup port: Only requires RTNL. Read locklessly by the data path. This is a problem as the bridge calls dev_set_promiscuity() when certain bridge port flags change and this function can sleep since the commit cited below, resulting in a splat such as [1]. Fix this by reducing the scope of the bridge lock and only take it when processing the two STP related attributes that require it. Remove the now stale comment from br_switchdev_set_port_flag(). The SWITCHDEV_F_DEFER flag can be removed in net-next. [1] BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 372, name: bash preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 5 locks held by bash/372: #0: ffff88810c51c3f0 (sb_writers#7){.+.+}-{0:0}, at: ksys_write (fs/read_write.c:740) #1: ffff888115ce9480 (&of->mutex){+.+.}-{4:4}, at: kernfs_fop_write_iter (fs/kernfs/file.c:343) #2: ffff88810b9fd330 (kn->active#37){.+.+}-{0:0}, at: kernfs_fop_write_iter (fs/kernfs/file.c:80 fs/kernfs/file.c:344) #3: ffffffffa59473a0 (rtnl_mutex){+.+.}-{4:4}, at: brport_store (net/bridge/br_sysfs_if.c:326) #4: ffff8881099d2d58 (&br->lock){+...}-{3:3}, at: brport_store (./include/linux/spinlock.h:348 net/bridge/br_sysfs_if.c:345) Preemption disabled at: 0x0 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) __might_resched.cold (kernel/sched/core.c:9163) netif_rx_mode_run (net/core/dev_addr_lists.c:1262) netif_rx_mode_sync (net/core/dev_addr_lists.c:1428) dev_set_promiscuity (net/core/dev_api.c:289) br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172) br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747) store_learning (net/bridge/br_sysfs_if.c:79 net/bridge/br_sysfs_if.c:235) brport_store (net/bridge/br_sysfs_if.c:346) kernfs_fop_write_iter (fs/kernfs/file.c:352) new_sync_write (fs/read_write.c:595) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) | ||||
| CVE-2024-14040 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: nexthop: Increase weight to u16 In CLOS networks, as link failures occur at various points in the network, ECMP weights of the involved nodes are adjusted to compensate. With high fan-out of the involved nodes, and overall high number of nodes, a (non-)ECMP weight ratio that we would like to configure does not fit into 8 bits. Instead of, say, 255:254, we might like to configure something like 1000:999. For these deployments, the 8-bit weight may not be enough. To that end, in this patch increase the next hop weight from u8 to u16. Increasing the width of an integral type can be tricky, because while the code still compiles, the types may not check out anymore, and numerical errors come up. To prevent this, the conversion was done in two steps. First the type was changed from u8 to a single-member structure, which invalidated all uses of the field. This allowed going through them one by one and audit for type correctness. Then the structure was replaced with a vanilla u16 again. This should ensure that no place was missed. The UAPI for configuring nexthop group members is that an attribute NHA_GROUP carries an array of struct nexthop_grp entries: struct nexthop_grp { __u32 id; /* nexthop id - must exist */ __u8 weight; /* weight of this nexthop */ __u8 resvd1; __u16 resvd2; }; The field resvd1 is currently validated and required to be zero. We can lift this requirement and carry high-order bits of the weight in the reserved field: struct nexthop_grp { __u32 id; /* nexthop id - must exist */ __u8 weight; /* weight of this nexthop */ __u8 weight_high; __u16 resvd2; }; Keeping the fields split this way was chosen in case an existing userspace makes assumptions about the width of the weight field, and to sidestep any endianness issues. The weight field is currently encoded as the weight value minus one, because weight of 0 is invalid. This same trick is impossible for the new weight_high field, because zero must mean actual zero. With this in place: - Old userspace is guaranteed to carry weight_high of 0, therefore configuring 8-bit weights as appropriate. When dumping nexthops with 16-bit weight, it would only show the lower 8 bits. But configuring such nexthops implies existence of userspace aware of the extension in the first place. - New userspace talking to an old kernel will work as long as it only attempts to configure 8-bit weights, where the high-order bits are zero. Old kernel will bounce attempts at configuring >8-bit weights. Renaming reserved fields as they are allocated for some purpose is commonly done in Linux. Whoever touches a reserved field is doing so at their own risk. nexthop_grp::resvd1 in particular is currently used by at least strace, however they carry an own copy of UAPI headers, and the conversion should be trivial. A helper is provided for decoding the weight out of the two fields. Forcing a conversion seems preferable to bending backwards and introducing anonymous unions or whatever. | ||||
| CVE-2026-64265 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req When fuse_resend() moves a request from fpq->processing back to fiq->pending, it sets FR_PENDING and clears FR_SENT but does not remove the requests intr_entry from fiq->interrupts. If the request had FR_INTERRUPTED set from a prior signal, intr_entry remains dangling on fiq->interrupts. When the requesting task then receives a fatal signal, fuse_remove_pending_req() sees FR_PENDING=1, removes the request from fiq->pending and frees it via the refcount path, also without cleaning intr_entry. The stale intr_entry causes use-after-free when fuse_read_interrupt() iterates fiq->interrupts: - list_del_init(&req->intr_entry) -> UAF write on freed slab - req->in.h.unique -> UAF read, data leaked to userspace Remove intr_entry from fiq->interrupts in fuse_resend() for interrupted requests before they are placed back on fiq->pending. Add a WARN_ON if the intr_entry is not empty on request destruction. | ||||
| CVE-2026-64288 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Avoid dereferencing NULL VNCR pseudo-TLB VNCR TLB invalidation occurs from MMU notifiers or TLBI instructions, and either can race against a vcpu not being onlined yet (no pseudo-TLB allocated). Similarly, the TLB might be invalid, and the invalidation should be skipped in this case. Both kvm_invalidate_vncr_ipa() and kvm_invalidate_vncr_va() are expected to perform the same checks, except that the latter doesn't check for the allocation and blindly dereferences the pointer. Solve this by introducing a new iterator built on top of the usual kvm_for_each_vcpu() that checks for both of the above conditions, and convert the two users to it. | ||||
| CVE-2026-64297 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: module: decompress: check return value of module_extend_max_pages() module_extend_max_pages() calls kvrealloc() internally and returns -ENOMEM on allocation failure. The return value is never checked. If the initial allocation fails, info->pages remains NULL and info->max_pages remains 0. Subsequent calls to module_get_next_page() will attempt to dynamically grow the array by calling module_extend_max_pages(info, 0) since info->used_pages is 0. This results in kvrealloc(NULL, 0) returning ZERO_SIZE_PTR, which is treated as a success, leading to a dereference of ZERO_SIZE_PTR and a kernel oops. Fix: add the missing error check after module_extend_max_pages() and return immediately on failure. This matches the pattern used by every other kvrealloc() caller in the module loading path. [Sami: Corrected the analysis in the commit message.] | ||||
| CVE-2026-64477 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled The architecture updates the cpu_mask in a domain's header to track which online CPUs are associated with the domain. When this mask becomes empty the architecture initiates offline of the domain that includes calling on resctrl fs to offline the domain. If it is a monitoring domain in which LLC occupancy is tracked resctrl fs forces the limbo handler to clear all busy RMID state associated with the domain. The limbo handler always reads the current event value associated with a busy RMID irrespective of it being checked as part of regular "is it still busy" check or whether it will be forced released anyway. When reading an RMID on a system with SNC enabled the "logical RMID" is converted to the "physical RMID" and this conversion requires the NUMA node ID of the resctrl monitoring domain that is in turn determined by querying the NUMA node ID of any CPU belonging to the monitoring domain. When the monitoring domain is going offline its cpu_mask is empty causing the NUMA node ID query via cpu_to_node() to be done with "nr_cpu_ids" as argument resulting in an out-of-bounds access. Refactor the limbo handler to skip reading the RMID when the RMID will just be forced to no longer be dirty in the domain anyway. Add a safety check to the architecture's RMID reader to protect against this scenario. | ||||
| CVE-2026-64482 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: gus: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_gf1_pcm_volume_control() does not check the return value before dereferencing kctl->id.index, which can lead to a NULL pointer dereference. Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. | ||||
| CVE-2026-64499 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1119: fix PM reference leak in buffer preenable ads1119_triggered_buffer_preenable() resumes the device with pm_runtime_resume_and_get() before starting a conversion. If i2c_smbus_write_byte() fails, the function returns the error directly and leaves the runtime PM usage counter elevated. The matching postdisable callback is not called when preenable fails, so the reference is leaked and the device may remain runtime-active indefinitely. Store the I2C transfer result in ret and drop the runtime PM reference on failure before returning the error. | ||||
| CVE-2026-64503 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: kxsd9: fix runtime PM imbalance on write_raw() error kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync() but returns -EINVAL directly when a scale with a non-zero integer part is requested, skipping the matching pm_runtime_put_autosuspend(). This leaks a runtime PM usage-counter reference on every such write, after which the device can no longer autosuspend. Set the error code and fall through to the existing put instead of returning early. | ||||
| CVE-2026-64530 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle tcf_classify() can return TC_ACT_CONSUMED while the skb is held by the defragmentation engine (e.g. act_ct on out-of-order fragments). When that happens the skb is no longer owned by the caller and must not be touched again. tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the switch and returned the skb to the caller as if classification had passed. The only qdisc that wires up qevents today is RED, via three call sites (qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop) red_enqueue() was continuing to operate on an skb it no longer owns in this case -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF. tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10 tc filter add block 10 ... action ct (with ct defrag enabled and traffic that produces out-of-order fragments, e.g. a fragmented UDP stream) Handle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingress and egress fast paths do: treat it as stolen and return NULL without touching the skb. Unlike the TC_ACT_STOLEN case, the skb must not be dropped/freed here, as it is no longer owned by us. | ||||
| CVE-2026-64529 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - remove unused character device and IOCTLs The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs for device configuration, start, stop, status query and enumeration. These IOCTLs are not part of any public uAPI header and have no known in-tree or out-of-tree users. Device lifecycle is already managed via sysfs. The ioctl interface also increases the attack surface and is the subject of a number of bug reports. Remove the character device, the IOCTL definitions, and the related data structures (adf_dev_status_info, adf_user_cfg_key_val, adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal module_init/module_exit hooks for workqueue, AER, and crypto/compression algorithm registration. Clean up leftover dead code that was only reachable from the removed IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(), adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(), adf_get_vf_real_id() and the unused ADF_CFG macros. Additionally, drop the entry associated to QAT IOCTLs in ioctl-number.rst. | ||||
| CVE-2026-64496 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: event: Fix event FIFO reset race `iio_event_getfd()` creates the event file descriptor with `anon_inode_getfd()`, which allocates a new fd, creates the anonymous file and installs it in the process fd table before returning to the caller. The IIO code resets the event FIFO after `anon_inode_getfd()` has returned, but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace. But since fd tables are shared between threads, another thread can guess the newly allocated fd number and issue a `read()` on it as soon as the fd has been installed. This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in parallel with the `kfifo_reset_out()` in `iio_event_getfd()`. The kfifo documentation says that `kfifo_reset_out()` is only safe when it is called from the reader thread and there is only one concurrent reader. Otherwise it is dangerous and must be handled in the same way as `kfifo_reset()`. If that happens, `kfifo_to_user()` can advance the FIFO `out` index based on state from before the reset, after the reset has already moved the `out` index to the current `in` index. That can leave the FIFO with an `out` index past the `in` index. A later `read()` can then see an underflowed FIFO length and copy more data than the event FIFO buffer contains. This can result in an out-of-bounds read and leak adjacent kernel memory to userspace. Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd is marked busy, but the new fd has not been installed yet, so userspace cannot access it while the FIFO is reset. | ||||
| CVE-2026-64418 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: shrinker: fix shrinker_info teardown race with expansion expand_shrinker_info() iterates all visible memcgs under shrinker_mutex, including memcgs that have not finished ->css_online() yet. Once pn->shrinker_info has been published, teardown must stay serialized with expand_shrinker_info() until that memcg is either fully online or no longer visible to iteration. Today alloc_shrinker_info() breaks that rule by dropping shrinker_mutex before freeing a partially initialized shrinker_info array, which may cause the following race: CPU0 CPU1 ==== ==== css_create --> list_add_tail_rcu(&css->sibling, &parent_css->children); online_css --> mem_cgroup_css_online --> alloc_shrinker_info --> alloc node0 info rcu_assign_pointer(C->node0->shrinker_info, old0) alloc node1 info -> FAIL -> goto err mutex_unlock(shrinker_mutex) shrinker_alloc() --> shrinker_memcg_alloc --> mutex_lock(shrinker_mutex) expand_shrinker_info --> mem_cgroup_iter see the memcg expand_one_shrinker_info --> old0 = C->node0->shrinker_info memcpy(new->unit, old0->unit, ...); free_shrinker_info --> kvfree(old0); /* double free !! */ kvfree_rcu(old0, rcu); The same problem exists later in mem_cgroup_css_online(). If alloc_shrinker_info() succeeds but a subsequent objcg allocation fails, the free_objcg -> free_shrinker_info() unwind path tears down the already published pn->shrinker_info arrays without shrinker_mutex. The expand_one_shrinker_info() can race with that teardown in the same way, leading to use-after-free or double-free of the old shrinker_info. Fix this by serializing shrinker_info teardown with shrinker_mutex, and by keeping alloc_shrinker_info() error cleanup inside the locked section. | ||||
| CVE-2026-64410 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: IPIP tunnel hardware offload is not yet support No driver supports for IPIP tunnels yet, give up early on setting up the hardware offload for this scenario. This patch adds a stub that can be enhanced to add more configuration that are currently not supported. As of now, the offload work is enqueued to the worker, then ignored if the hardware offload configuration is not supported. Check the NF_FLOW_HW flag to know if this entry was already tried once to be offloaded so this is not retried on refresh when unsupported. Move NF_FLOW_HW flag check to nf_flow_offload_add(). If this NF_FLOW_HW flag is unset the _del and _stats variants are never called. This can be updated later on to skip hardware offload work to be queued in case hardware offload does not support it. | ||||