| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: restore set elements when delete set fails
From abort path, nft_mapelem_activate() needs to restore refcounters to
the original state. Currently, it uses the set->ops->walk() to iterate
over these set elements. The existing set iterator skips inactive
elements in the next generation, this does not work from the abort path
to restore the original state since it has to skip active elements
instead (not inactive ones).
This patch moves the check for inactive elements to the set iterator
callback, then it reverses the logic for the .activate case which
needs to skip active elements.
Toggle next generation bit for elements when delete set command is
invoked and call nft_clear() from .activate (abort) path to restore the
next generation bit.
The splat below shows an object in mappings memleak:
[43929.457523] ------------[ cut here ]------------
[43929.457532] WARNING: CPU: 0 PID: 1139 at include/net/netfilter/nf_tables.h:1237 nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[...]
[43929.458014] RIP: 0010:nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458076] Code: 83 f8 01 77 ab 49 8d 7c 24 08 e8 37 5e d0 de 49 8b 6c 24 08 48 8d 7d 50 e8 e9 5c d0 de 8b 45 50 8d 50 ff 89 55 50 85 c0 75 86 <0f> 0b eb 82 0f 0b eb b3 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90
[43929.458081] RSP: 0018:ffff888140f9f4b0 EFLAGS: 00010246
[43929.458086] RAX: 0000000000000000 RBX: ffff8881434f5288 RCX: dffffc0000000000
[43929.458090] RDX: 00000000ffffffff RSI: ffffffffa26d28a7 RDI: ffff88810ecc9550
[43929.458093] RBP: ffff88810ecc9500 R08: 0000000000000001 R09: ffffed10281f3e8f
[43929.458096] R10: 0000000000000003 R11: ffff0000ffff0000 R12: ffff8881434f52a0
[43929.458100] R13: ffff888140f9f5f4 R14: ffff888151c7a800 R15: 0000000000000002
[43929.458103] FS: 00007f0c687c4740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000
[43929.458107] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[43929.458111] CR2: 00007f58dbe5b008 CR3: 0000000123602005 CR4: 00000000001706f0
[43929.458114] Call Trace:
[43929.458118] <TASK>
[43929.458121] ? __warn+0x9f/0x1a0
[43929.458127] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458188] ? report_bug+0x1b1/0x1e0
[43929.458196] ? handle_bug+0x3c/0x70
[43929.458200] ? exc_invalid_op+0x17/0x40
[43929.458211] ? nft_setelem_data_deactivate+0xd7/0xf0 [nf_tables]
[43929.458271] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458332] nft_mapelem_deactivate+0x24/0x30 [nf_tables]
[43929.458392] nft_rhash_walk+0xdd/0x180 [nf_tables]
[43929.458453] ? __pfx_nft_rhash_walk+0x10/0x10 [nf_tables]
[43929.458512] ? rb_insert_color+0x2e/0x280
[43929.458520] nft_map_deactivate+0xdc/0x1e0 [nf_tables]
[43929.458582] ? __pfx_nft_map_deactivate+0x10/0x10 [nf_tables]
[43929.458642] ? __pfx_nft_mapelem_deactivate+0x10/0x10 [nf_tables]
[43929.458701] ? __rcu_read_unlock+0x46/0x70
[43929.458709] nft_delset+0xff/0x110 [nf_tables]
[43929.458769] nft_flush_table+0x16f/0x460 [nf_tables]
[43929.458830] nf_tables_deltable+0x501/0x580 [nf_tables] |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: fix data-race in ipv6_mc_down / mld_ifc_work
idev->mc_ifc_count can be written over without proper locking.
Originally found by syzbot [1], fix this issue by encapsulating calls
to mld_ifc_stop_work() (and mld_gq_stop_work() for good measure) with
mutex_lock() and mutex_unlock() accordingly as these functions
should only be called with mc_lock per their declarations.
[1]
BUG: KCSAN: data-race in ipv6_mc_down / mld_ifc_work
write to 0xffff88813a80c832 of 1 bytes by task 3771 on cpu 0:
mld_ifc_stop_work net/ipv6/mcast.c:1080 [inline]
ipv6_mc_down+0x10a/0x280 net/ipv6/mcast.c:2725
addrconf_ifdown+0xe32/0xf10 net/ipv6/addrconf.c:3949
addrconf_notify+0x310/0x980
notifier_call_chain kernel/notifier.c:93 [inline]
raw_notifier_call_chain+0x6b/0x1c0 kernel/notifier.c:461
__dev_notify_flags+0x205/0x3d0
dev_change_flags+0xab/0xd0 net/core/dev.c:8685
do_setlink+0x9f6/0x2430 net/core/rtnetlink.c:2916
rtnl_group_changelink net/core/rtnetlink.c:3458 [inline]
__rtnl_newlink net/core/rtnetlink.c:3717 [inline]
rtnl_newlink+0xbb3/0x1670 net/core/rtnetlink.c:3754
rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6558
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2545
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6576
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0x589/0x650 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x66e/0x770 net/netlink/af_netlink.c:1910
...
write to 0xffff88813a80c832 of 1 bytes by task 22 on cpu 1:
mld_ifc_work+0x54c/0x7b0 net/ipv6/mcast.c:2653
process_one_work kernel/workqueue.c:2627 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2700
worker_thread+0x525/0x730 kernel/workqueue.c:2781
... |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: host: Add alignment check for event ring read pointer
Though we do check the event ring read pointer by "is_valid_ring_ptr"
to make sure it is in the buffer range, but there is another risk the
pointer may be not aligned. Since we are expecting event ring elements
are 128 bits(struct mhi_ring_element) aligned, an unaligned read pointer
could lead to multiple issues like DoS or ring buffer memory corruption.
So add a alignment check for event ring read pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix lockdep splat in in6_dump_addrs()
As reported by syzbot, we should not use rcu_dereference()
when rcu_read_lock() is not held.
WARNING: suspicious RCU usage
5.19.0-rc2-syzkaller #0 Not tainted
net/ipv6/addrconf.c:5175 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz-executor326/3617:
#0: ffffffff8d5848e8 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xae/0xc20 net/netlink/af_netlink.c:2223
stack backtrace:
CPU: 0 PID: 3617 Comm: syz-executor326 Not tainted 5.19.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
in6_dump_addrs+0x12d1/0x1790 net/ipv6/addrconf.c:5175
inet6_dump_addr+0x9c1/0xb50 net/ipv6/addrconf.c:5300
netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275
__netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380
netlink_dump_start include/linux/netlink.h:245 [inline]
rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2492
___sys_sendmsg+0xf3/0x170 net/socket.c:2546
__sys_sendmsg net/socket.c:2575 [inline]
__do_sys_sendmsg net/socket.c:2584 [inline]
__se_sys_sendmsg net/socket.c:2582 [inline]
__x64_sys_sendmsg+0x132/0x220 net/socket.c:2582
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()
Some time ago 8965779d2c0e ("ipv6,mcast: always hold idev->lock before mca_lock")
switched ipv6_get_lladdr() to __ipv6_get_lladdr(), which is rcu-unsafe
version. That was OK, because idev->lock was held for these codepaths.
In 88e2ca308094 ("mld: convert ifmcaddr6 to RCU") these external locks were
removed, so we probably need to restore the original rcu-safe call.
Otherwise, we occasionally get a machine crashed/stalled with the following
in dmesg:
[ 3405.966610][T230589] general protection fault, probably for non-canonical address 0xdead00000000008c: 0000 [#1] SMP NOPTI
[ 3405.982083][T230589] CPU: 44 PID: 230589 Comm: kworker/44:3 Tainted: G O 5.15.19-cloudflare-2022.2.1 #1
[ 3405.998061][T230589] Hardware name: SUPA-COOL-SERV
[ 3406.009552][T230589] Workqueue: mld mld_ifc_work
[ 3406.017224][T230589] RIP: 0010:__ipv6_get_lladdr+0x34/0x60
[ 3406.025780][T230589] Code: 57 10 48 83 c7 08 48 89 e5 48 39 d7 74 3e 48 8d 82 38 ff ff ff eb 13 48 8b 90 d0 00 00 00 48 8d 82 38 ff ff ff 48 39 d7 74 22 <66> 83 78 32 20 77 1b 75 e4 89 ca 23 50 2c 75 dd 48 8b 50 08 48 8b
[ 3406.055748][T230589] RSP: 0018:ffff94e4b3fc3d10 EFLAGS: 00010202
[ 3406.065617][T230589] RAX: dead00000000005a RBX: ffff94e4b3fc3d30 RCX: 0000000000000040
[ 3406.077477][T230589] RDX: dead000000000122 RSI: ffff94e4b3fc3d30 RDI: ffff8c3a31431008
[ 3406.089389][T230589] RBP: ffff94e4b3fc3d10 R08: 0000000000000000 R09: 0000000000000000
[ 3406.101445][T230589] R10: ffff8c3a31430000 R11: 000000000000000b R12: ffff8c2c37887100
[ 3406.113553][T230589] R13: ffff8c3a39537000 R14: 00000000000005dc R15: ffff8c3a31431000
[ 3406.125730][T230589] FS: 0000000000000000(0000) GS:ffff8c3b9fc80000(0000) knlGS:0000000000000000
[ 3406.138992][T230589] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3406.149895][T230589] CR2: 00007f0dfea1db60 CR3: 000000387b5f2000 CR4: 0000000000350ee0
[ 3406.162421][T230589] Call Trace:
[ 3406.170235][T230589] <TASK>
[ 3406.177736][T230589] mld_newpack+0xfe/0x1a0
[ 3406.186686][T230589] add_grhead+0x87/0xa0
[ 3406.195498][T230589] add_grec+0x485/0x4e0
[ 3406.204310][T230589] ? newidle_balance+0x126/0x3f0
[ 3406.214024][T230589] mld_ifc_work+0x15d/0x450
[ 3406.223279][T230589] process_one_work+0x1e6/0x380
[ 3406.232982][T230589] worker_thread+0x50/0x3a0
[ 3406.242371][T230589] ? rescuer_thread+0x360/0x360
[ 3406.252175][T230589] kthread+0x127/0x150
[ 3406.261197][T230589] ? set_kthread_struct+0x40/0x40
[ 3406.271287][T230589] ret_from_fork+0x22/0x30
[ 3406.280812][T230589] </TASK>
[ 3406.288937][T230589] Modules linked in: ... [last unloaded: kheaders]
[ 3406.476714][T230589] ---[ end trace 3525a7655f2f3b9e ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: fix GAIT table indexing due to double-scaling pointer arithmetic
kvm_s390_pci_aif_enable(), kvm_s390_pci_aif_disable(), and
aen_host_forward() index the GAIT by manually multiplying the index
with sizeof(struct zpci_gaite).
Since aift->gait is already a struct zpci_gaite pointer, this
double-scales the offset, accessing element aisb*16 instead of aisb.
This causes out-of-bounds accesses when aisb >= 32 (with
ZPCI_NR_DEVICES=512)
Fix by removing the erroneous sizeof multiplication. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v2.0 enc/dec rings
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit e2b5499fca55f1a32960a311bbb62e35891eaf73) |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd()
Two latent bugs in the Text-phase handler, both present since the
original LIO integration in commit e48354ce078c ("iscsi-target: Add
iSCSI fabric support for target v4.1"):
1) DataDigest CRC buffer overread (4 bytes past text_in).
text_in is kzalloc()'d at ALIGN(payload_length, 4). rx_size is then
incremented by ISCSI_CRC_LEN to make room for the received DataDigest
in the iovec, but the same (now-bumped) rx_size is passed as the
buffer length to iscsit_crc_buf():
if (conn->conn_ops->DataDigest) {
...
rx_size += ISCSI_CRC_LEN;
}
...
if (conn->conn_ops->DataDigest) {
data_crc = iscsit_crc_buf(text_in, rx_size, 0, NULL);
iscsit_crc_buf() walks rx_size bytes of text_in with crc32c(), so
when DataDigest is negotiated it reads 4 bytes past the end of the
text_in allocation. KASAN reproduces this directly on the unpatched
mainline tree as slab-out-of-bounds in crc32c() called from the Text
PDU path. The OOB bytes feed crc32c() and are then compared against
the initiator-supplied checksum, so the value does not flow back to
the attacker, but the kernel does read past the buffer on every Text
PDU with DataDigest=CRC32C.
Fix by passing the actual padded payload length
(ALIGN(payload_length, 4)) that was used for the kzalloc().
2) Stale cmd->text_in_ptr re-free (double-free) on ERL>0 bad DataDigest
drop.
On DataDigest mismatch with ErrorRecoveryLevel > 0 the handler
silently drops the PDU and lets the initiator plug the CmdSN gap:
kfree(text_in);
return 0;
cmd->text_in_ptr still points at the freed buffer. The next Text
Request on the same ITT re-enters iscsit_setup_text_cmd(), which
unconditionally does
kfree(cmd->text_in_ptr);
cmd->text_in_ptr = NULL;
freeing the same pointer a second time. Session teardown via
iscsit_release_cmd() has the same shape and hits the same double-free
if the connection is dropped before a second Text Request arrives.
On an unmodified mainline tree the bug-1 CRC overread fires first on
the initial valid Text Request and perturbs the subsequent state, so
#4 was isolated by building a kernel with only the bug-1 hunk of this
patch applied plus temporary printk() observability around the three
relevant kfree() sites. The observability prints are not part of
this patch. On that build, a three-PDU Text Request sequence after
login produces two back-to-back splats:
BUG: KASAN: double-free in iscsit_setup_text_cmd+0x??
BUG: KASAN: double-free in iscsit_release_cmd+0x??
showing the same pointer freed in the ERL>0 drop path and again in
iscsit_setup_text_cmd() (next Text Request on the same ITT) and once
more in iscsit_release_cmd() (session teardown). On distro kernels
with CONFIG_SLAB_FREELIST_HARDENED=y (default) the double-free
becomes a remote kernel BUG(); on non-hardened kernels it corrupts
the slab freelist.
Fix by clearing cmd->text_in_ptr after the kfree() in the ERL>0 drop
path. With both hunks applied #4 is directly observable on the stock
tree without observability printks; fixing bug-1 alone would mask #4
less, not more, so the hunks are submitted together.
Both fixes are one-liners. The Text PDU state machine is unchanged and
the wire protocol is unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: property: Reject dir_len < 4 to prevent size_t underflow
On the non-root path, __tb_property_parse_dir() takes dir_len from
entry->length (u16 widened to size_t). Two distinct OOB conditions
follow when entry->length < 4:
1. The non-root path begins with kmemdup(&block[dir_offset],
sizeof(*dir->uuid), ...) which always reads 4 dwords from
dir_offset. tb_property_entry_valid() only enforces
dir_offset + entry->length <= block_len, so a crafted entry
with dir_offset close to the end of the property block and
entry->length in 0..3 passes that gate but lets the UUID copy
run off the block (e.g. dir_offset = 497, dir_len = 3 in a
500-dword block reads block[497..501]).
2. After the kmemdup, content_len = dir_len - 4 underflows size_t
to ~SIZE_MAX, nentries becomes SIZE_MAX / 4, and the entry
walk runs OOB on each iteration until an entry fails
validation or the kernel oopses on an unmapped page.
Reject dir_len < 4 on the non-root path *before* the UUID kmemdup,
which closes both holes.
Also move INIT_LIST_HEAD(&dir->properties) up to immediately after
the dir allocation so the new error-return path (and the existing
uuid-alloc failure path) calling tb_property_free_dir() sees a
walkable list rather than the zero-initialized NULL next/prev that
list_for_each_entry_safe() would oops on. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mct_u232: fix memory corruption with small endpoint
The driver overrides the maximum transfer size for a specific device
which only accepts 16 byte packets for its 32 byte bulk-out endpoint.
Make sure to never increase the maximum transfer size to prevent slab
corruption should a malicious device report a smaller endpoint max
packet size than expected. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: xpad - fix out-of-bounds access for Share button
xpadone_process_packet() receives len directly from urb->actual_length
and uses it to index the share-button byte at data[len - 18] or
data[len - 26]. Since both len and data[0] are under the device's
control, a broken controller can send a GIP_CMD_INPUT packet with
actual_length < 18 (e.g. 5 bytes) and reach this code path, causing
accesses beyond the actual array.
Fix this by calculating the offset and checking bounds against the
packet length. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one
Initialize nr_pages to 1 at the start of each loop iteration, like
folio_referenced_one() does.
Without this, nr_pages computed by a previous folio_unmap_pte_batch() call
can be reused on a later iteration that does not run
folio_unmap_pte_batch() again.
mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call
madvise(MADV_FREE), then make the last page device-exclusive via
HMM_DMIRROR_EXCLUSIVE.
Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will
first clear the first 15 out of 16 entries mapping the lazyfree folio.
This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets
reused on a device-exclusive pte, thus potentially corrupting folio
refcount/mapcount.
At the moment, I have a userspace program which can make the kernel spit
out a trace, but the blow up is in folio_referenced_one(), because there
are existing bugs in the interaction between device-private and rmap
(which too I am investigating). I did a one liner kernel change to avoid
going into folio_referenced_one(), and the kernel blows up at
folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted.
Note that the bug is there not since file folio batching but lazyfree
folio batching, since device-exclusive only works for anonymous folios.
Userspace visible effect is simply kernel crashing somewhere due to
refcount/mapcount corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Fix exec_queue leak on width check in stream open
In xe_oa_stream_open_ioctl(), when param.exec_q->width > 1 the
function returns -EOPNOTSUPP directly, skipping the existing
err_exec_q cleanup path. The exec_queue reference obtained by
xe_exec_queue_lookup() is leaked.
The exec queue holds a reference on the xe_file, which is only
dropped during queue teardown. The leaked lookup ref is not on
the file's exec_queue xarray, so file close cannot release it.
This keeps both the exec queue and the file private state pinned
indefinitely.
Jump to err_exec_q instead of returning directly so the reference
is released.
(cherry picked from commit 339fa0be9e4a5d69fa47e91f4a36574224fb478f) |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: aggregator: remove the software node when deactivating the aggregator
The dynamic software node we create for the aggregator platform device
when using configfs is leaked when the device is deactivated. Destroy it
as the last step in the tear-down path. |
| A use-after-free vulnerability was found in the Linux kernel's netfilter subsystem in net/netfilter/nf_tables_api.c.
Mishandled error handling with NFT_MSG_NEWRULE makes it possible to use a dangling pointer in the same transaction causing a use-after-free vulnerability. This flaw allows a local attacker with user access to cause a privilege escalation issue.
We recommend upgrading past commit 1240eb93f0616b21c675416516ff3d74798fdc97 |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: mcast: Fix a possible use-after-free when removing a bridge port
When per-VLAN multicast snooping is enabled, the bridge iterates over
all the bridge ports, disables the per-port multicast context on each
port and enables the per-{port, VLAN} multicast contexts instead. The
reverse happens when per-VLAN multicast snooping is disabled.
When global multicast snooping is enabled, the bridge iterates over all
the bridge ports and enables the per-port multicast context on each
port. The reverse happens when multicast snooping is disabled.
The above scheme can result in a situation where both types of contexts
(per-port and per-{port, VLAN}) are enabled on a single bridge port:
# ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev br1 type bridge mcast_vlan_snooping 1
# ip link set dev br1 type bridge mcast_snooping 0
# ip link set dev br1 type bridge mcast_snooping 1
This is not intended and it is a problem since the commit cited below.
Prior to this commit, when removing a bridge port,
br_multicast_disable_port() would disable the per-port multicast context
and the per-{port, VLAN} multicast contexts would get disabled when
flushing VLANs.
After this commit, br_multicast_disable_port() only disables the
per-port multicast context if per-VLAN multicast snooping is disabled.
If both types of contexts were enabled on the port when it was removed,
the per-port multicast context would remain enabled when freeing the
bridge port, leading to a use-after-free [1].
Fix by preventing the bridge from enabling / disabling the per-port
multicast contexts when toggling global multicast snooping if per-VLAN
multicast snooping is enabled.
[1]
ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927)
WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0
[...]
Call Trace:
<IRQ>
__debug_check_no_obj_freed (lib/debugobjects.c:1116)
kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565)
kobject_cleanup (lib/kobject.c:689)
rcu_do_batch (kernel/rcu/tree.c:2617)
rcu_core (kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
__irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735)
irq_exit_rcu (kernel/softirq.c:752)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47))
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: hand off the pinned file reference to accept_doit
handshake_req_next() removes the request from the per-net
pending list and drops hn_lock before handshake_nl_accept_doit()
reads req->hr_sk->sk_socket and dereferences sock->file (once in
FD_PREPARE() and again in get_file()). In that window a
consumer running tls_handshake_cancel() followed by sockfd_put()
(svc_sock_free) or __fput_sync() (xs_reset_transport) releases
sock->file. sock_release() then runs sock_orphan(), zeroing
sk_socket, and frees the struct socket. The accept-side code
either reads NULL through sk_socket or chases freed memory.
The submit-side sock_hold() does not prevent this. sk_refcnt
protects struct sock, but struct socket and sock->file are
independently refcounted via the file descriptor the consumer
owns. Pinning sk leaves sock and sock->file unprotected.
Retarget the accept-side dereferences at req->hr_file, which was
pinned at submit time, instead of req->hr_sk->sk_socket->file.
Pinning on its own is not sufficient: a consumer that cancels
between handshake_req_next() returning and accept_doit reaching
FD_PREPARE() takes the !remove_pending() branch in
handshake_req_cancel() and drops hr_file before the accept side
takes its own reference. Hand off an additional file reference
inside handshake_req_next(), under hn_lock, so the accept side
operates on a reference that no concurrent handshake_req_cancel()
can revoke. FD_PREPARE() consumes that handed-off reference,
either by transferring it to the new fd in fd_publish() or by
dropping it in the cleanup destructor on error; the explicit
get_file() that previously balanced FD_PREPARE() is therefore
redundant and goes away.
Update handshake_req_cancel_test2 and _test3 to simulate the
FD_PREPARE() consumption with an fput() so the kunit file-count
assertions stay balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Serialize UMP output teardown with event_input
seq_ump_process_event() borrows client->out_rfile.output without
synchronizing with the first-open and last-close transition in
seq_ump_client_open() and seq_ump_client_close().
The last output unuse can therefore drop opened[STR_OUT] to zero and
release the rawmidi file while an in-flight event_input callback is still
inside snd_rawmidi_kernel_write(). That leaves the rawmidi substream
runtime exposed to teardown before the write path has taken its own
buffer reference.
Add a per-client rwlock for the event_input-visible output file. Publish
a newly opened output file under the write side, and hold the read side
from the output lookup through snd_rawmidi_kernel_write(). The last
output close copies and clears the visible output file under the write
side, then drops the lock and releases the saved rawmidi file. Use
IRQ-safe rwlock guards because event_input can also be reached from
atomic sequencer delivery.
The buggy scenario involves two paths, with each column showing the
order within that path:
path A label: event_input path path B label: last unuse path
1. seq_ump_process_event() reads 1. seq_ump_client_close()
client->out_rfile.output. drops opened[STR_OUT] to zero.
2. snd_rawmidi_kernel_write1() 2. snd_rawmidi_kernel_release()
has not yet pinned runtime. closes the output file.
3. The writer continues using 3. close_substream() frees
the borrowed substream. substream->runtime.
This keeps the output substream and runtime alive for the full
event_input write while keeping rawmidi release outside the rwlock.
KASAN reproduced this as a slab-use-after-free in
snd_rawmidi_kernel_write1(), with allocation through
seq_ump_use()/snd_seq_port_connect() and free through
seq_ump_unuse()/snd_seq_port_disconnect().
Validation reproduced this kernel report:
KASAN slab-use-after-free in snd_rawmidi_kernel_write1+0x9d/0x400
RIP: 0033:0x7f5528af837f
Read of size 8
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x650 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x1a7/0x340 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
snd_rawmidi_kernel_write1+0x9d/0x400 (?:?)
__asan_load8+0x82/0xb0 (?:?)
update_stack_state+0x1ef/0x2d0 (?:?)
snd_rawmidi_kernel_write+0x1a/0x20 (?:?)
seq_ump_process_event+0xd4/0x120 (sound/core/seq/seq_ump_client.c:82)
__snd_seq_deliver_single_event+0x8a/0xe0 (?:?)
snd_seq_deliver_from_ump+0x2b2/0xd60 (?:?)
lock_acquire+0x14e/0x2e0 (?:?)
find_held_lock+0x31/0x90 (?:?)
snd_seq_port_use_ptr+0xa6/0xe0 (?:?)
__kasan_check_write+0x18/0x20 (?:?)
do_raw_read_unlock+0x32/0xa0 (?:?)
_raw_read_unlock+0x26/0x50 (?:?)
snd_seq_deliver_single_event+0x45c/0x4b0 (?:?)
snd_seq_deliver_event+0x10d/0x1b0 (?:?)
snd_seq_client_enqueue_event+0x192/0x240 (?:?)
snd_seq_write+0x2cd/0x450 (?:?)
apparmor_file_permission+0x20/0x30 (?:?)
security_file_permission+0x51/0x60 (?:?)
vfs_write+0x1ce/0x850 (?:?)
__fget_files+0x12b/0x220 (?:?)
lock_release+0xc8/0x2a0 (?:?)
__rcu_read_unlock+0x74/0x2d0 (?:?)
__fget_files+0x135/0x220 (?:?)
ksys_write+0x15a/0x180 (?:?)
rcu_is_watching+0x24/0x60 (?:?)
__x64_sys_write+0x46/0x60 (?:?)
x64_sys_call+0x7d/0x20d0 (?:?)
do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mtk-snfi: unregister ECC engine on probe failure and remove() callback
mtk_snand_probe() registers the on-host NAND ECC engine, but teardown was
missing from both probe unwind and remove-time cleanup. Add a devm cleanup
action after successful registration so
nand_ecc_unregister_on_host_hw_engine() runs automatically on probe
failures and during device removal. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix NULL pointer bug in svm_range_set_attr
The process_info could be NULL if user doesn't call kfd_ioctl_acquire_vm
before calling kfd_ioctl_svm.
(cherry picked from commit 83a26c812e0529eb040d31a76f73e33e637243d4) |
