| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Erlang/OTP ssl application does not validate that the PSK identity list and binder list carried in a TLS 1.3 ClientHello pre-shared key extension have equal length before passing them to the session ticket handler. In tls_handshake_1_3:handle_pre_shared_key/3, an OfferedPreSharedKeys record with a mismatched number of identities and binders is forwarded directly to tls_server_session_ticket:use/4, which crashes the session ticket handler process.
An unauthenticated remote attacker can send a single crafted ClientHello to a TLS 1.3 server with session tickets enabled (stateful or stateless mode) and permanently disrupt session ticket handling on that listener. New TLS 1.3 handshakes complete but subsequently crash when the server attempts to issue a session ticket, effectively making TLS 1.3 unusable on the affected listener until the ssl application is restarted. TLS 1.2 connections are not affected.
This issue affects OTP from OTP 22.2 before OTP 29.0.3, OTP 28.5.0.3 and OTP 27.3.4.14, corresponding to ssl from 9.5 before 11.7.3, 11.6.0.3 and 11.2.12.10. |
| The affected product is vulnerable to a stack-based buffer overflow, which may allow an attacker to cause a memory corruption via a Read Request. |
| The affected product is vulnerable to a heap-based buffer overflow via a crafted MMS Initiate request. Remote code execution (RCE) has been demonstrated when ASLR is disabled; memory corruption or denial of service may occur in configurations where ASLR is enabled. |
| The affected product is vulnerable to an Out-of-bounds read, which may allow an attacker to crash the parsing process and cause a denial of service. |
| GNU coreutils unexpand is vulnerable to a heap-based buffer overflow due to an integer overflow during buffer allocation when processing large tab stop (-t) values. The multiplication used to calculate the allocation size can wrap around, resulting in an undersized buffer.
When processing crafted input, subsequent writes exceed the allocated memory, leading to an out‑of‑bounds heap write.
When running GNU coreutils unexpand with attacker-provided large tab stop (-t) arguments, this behavior leads to a crash and potentially achieve a heap write primitive depending on memory layout.
This issue has been fixed in the commit b60a159fdc5bfcf9988d3a4cb6f53abe8ad5d35d |
| GNU coreutils uniq is vulnerable to an out‑of‑bounds read due to incorrect handling of multibyte input when the -w (--check-chars) option is used. The find_field() function miscalculates the byte length of characters by repeatedly processing a fixed pointer instead of advancing through the input, resulting in an inflated length value.
This incorrect length is later used in a memcmp operation, causing reads beyond the allocated buffer when processing crafted multibyte input.
When running GNU coreutils uniq with attacker-provided arguments, this behavior leads to a crash and potential adjacent heap memory exposure.
This issue has been fixed in the commit d64e35a8a4c0e4608321433e0d84d917e4e36371. |
| Data::ReqRep::Shared versions before 0.05 for Perl allow an out-of-bounds read via an unvalidated arena offset and length in reqrep_recv_locked.
The attach-time validator reqrep_validate_header checks the header scalars and region layout against the file size, but does not validate the array contents it then trusts. reqrep_recv_locked does memcpy(copy_buf, req_arena + arena_off, len) with arena_off and len read raw from the mmap'd segment and never bounded against the arena capacity (req_arena_cap).
A local peer that can write the backing file can leave the header valid while poisoning a request slot's offset and length, so receiving the request copies a file-controlled offset and length out of the arena, reading adjacent memory or crashing the process. |
| HTML::Bare versions through 0.04 for Perl have an unbounded character lookahead.
The parserc_parse function attempts to check for multicharacter strings such as "<![CDATA" or element terminators such as ">" without checking that the offsets are within the buffer.
Truncated strings such as "<a/" can trigger an out-of-bounds read.
Note that the latest version available on CPAN is version 0.02. Newer versions are available on the git repository. |
| XML::Bare versions through 0.53 for Perl have an unbounded character lookahead.
The parserc_parse function attempts to check for multicharacter strings such as "<![CDATA" or element terminators such as ">" without checking that the offsets are within the buffer.
Truncated strings such as "<a/" can trigger an out-of-bounds read. |
| rz-libdemangle is a Rizin library for demangling symbols. Prior to 6bf56d3, the Rust demangler in src/rust/rust_v0.c can perform an out-of-bounds read when the demangler structure is not yet initialized. This issue is fixed in commit 6bf56d3. |
| Improper Validation of Specified Quantity in Input in ZenHive mpp allows an unauthenticated remote client to drain the fee-payer wallet in a single request by naming an arbitrarily high gas price.
When the mpp Elixir library is configured as fee payer (fee_payer: true), MPP.Tempo.Transaction.cosign_fee_payer/3 re-signs the client-supplied base fields of the 0x76 AASigned envelope verbatim, including max_fee_per_gas and max_priority_fee_per_gas, without validating that they are within reasonable bounds. A malicious client embeds arbitrarily large values for these fields in the signed envelope. The server co-signs and broadcasts the transaction. The effective_gas_price billed against the fee-payer wallet is derived from the attacker-supplied ceilings, so the server pays those inflated per-gas rates out of its own wallet. A single crafted request can drain the wallet entirely, after which the server can no longer sponsor gas for legitimate payment requests.
This issue affects mpp: from 0.2.0 before 0.6.0. |
| Improper Validation of Specified Quantity in Input in ZenHive mpp allows an unauthenticated remote client to inflate the fee-payer's gas cost per payment by a large multiplier, degrading the sponsor's operating margin.
When the mpp Elixir library is configured as fee payer (fee_payer: true), MPP.Tempo.Transaction.cosign_fee_payer/3 re-signs the client-supplied base fields of the 0x76 AASigned envelope verbatim, including the EIP-2930 access list, without validating its length or contents. EIP-2930 access list entries incur intrinsic gas (~2,400 gas per address, plus 1,900 gas per storage key) charged before any opcode executes, regardless of whether the listed addresses are ever touched. A malicious client submits a valid transferWithMemo call alongside a large number of fabricated access-list entries. The server co-signs and broadcasts the transaction. The intended transfer executes normally, but the fee-payer wallet pays a large multiple of the expected gas cost with no corresponding on-chain work.
At the maintainer's default of 137 access-list entries (fitting within Bandit's 10,000-byte per-header-field limit) and 100 Gwei max_fee_per_gas, per-payment gas cost rises from ~51,287 to ~380,087 gas, a 7.4x multiplier. Sustained abuse destroys the sponsor's operating margin on low-cost payments and, over time, drains the fee-payer wallet.
This issue affects mpp: from 0.2.0 before 0.6.0. |
| Improper Validation of Specified Quantity in Input in ZenHive mpp allows an unauthenticated remote client to drain the fee-payer wallet, resulting in denial of service for legitimate clients.
When the mpp Elixir library is configured as fee payer (fee_payer: true), the MPP.Methods.Tempo payment method co-signs and broadcasts a client-supplied EVM transaction without first validating that the client-supplied gas_limit is sufficient to complete the intended call. A malicious client can submit a signed transferWithMemo transaction with gas_limit deliberately set just below the amount required for successful execution. The server co-signs the transaction and broadcasts it via rpc_broadcast_sync. The transaction runs out of gas during EVM execution and reverts, but the fee-payer wallet is still charged for the burned gas while the client pays nothing and receives no resource. Repeated requests from one or more malicious clients drain the fee-payer wallet at near-zero cost to the attacker, ultimately preventing the server from sponsoring gas for legitimate payment requests.
The wait_for_confirmation = false (optimistic) path is also affected: it invokes simulate_payment_call via eth_call, but that simulation omits the gas parameter and therefore does not catch out-of-gas conditions.
This issue affects mpp: from 0.2.0 before 0.6.0. |
| Wire provides gRPC and protocol buffers for Android, Kotlin, Swift, and Java. Prior to 6.3.0 and 7.0.0-alpha03, ByteArrayProtoReader32.skipGroup() and ProtoReader.skipGroup() in wire-runtime do not validate that a LENGTH_DELIMITED field length is non-negative before skip(), allowing a crafted protobuf varint encoding -128 as a signed Int to make skip(-128) move the internal position negative and make the next readByte() throw ArrayIndexOutOfBoundsException instead of the documented IOException or ProtocolException, which can crash services using ProtoAdapter.decode(byte[]) on untrusted payloads. This issue is fixed in versions 6.3.0 and 7.0.0-alpha03. |
| The urwid web display backend (urwid/display/web.py) generates web session identifiers (urwid_id) in Screen.start() by concatenating two random.randrange(10**9) calls that use Python's Mersenne Twister PRNG, which is not cryptographically secure. Each call consumes approximately 30 bits of PRNG state, and the Mersenne Twister internal state is approximately 19,937 bits, so an attacker who observes approximately 334 session IDs (for example via the X-Urwid-ID HTTP response header) can fully reconstruct the internal state and predict all past and future session IDs (Path B). The same identifier is also used as the filename of a FIFO created in the world-listable /tmp directory (for example /tmp/urwid375487765176907690.in), so any local user on the host can list /tmp to enumerate active session tokens directly (Path A). With a valid session ID, an attacker can read the victim's terminal screen via the polling endpoint, inject keystrokes into the victim's session (yielding OS-level code execution with the session owner's privileges if the session runs a shell), and inject exit sequences or flood the FIFO to terminate or crash the session. A prior Bandit S311 warning on this usage was suppressed with # noqa: S311 rather than fixed |
| A buffer overflow vulnerability was found in the command line interface of AOS-CX. Successful exploitation of these vulnerabilities could allow an remote low-privileged user to execute arbitrary code as a privileged user on the underlying operating system. |
| Buffer overflow vulnerabilities exist in the command line interface of AOS-CX. Successful exploitation of these vulnerabilities could allow a remote high-privileged user to execute arbitrary code as a privileged user on the underlying operating system. |
| Data::SortedSet::Shared versions before 0.03 for Perl allow an out-of-bounds read via unvalidated node indices in the rank and min/max query paths.
The attach-time validator ss_validate_header bounds only the root index against the node pool (node_capacity). The order-statistics and min/max queries then follow children[], leftmost and rightmost node indices read raw from the mmap'd segment without bounding them against node_capacity. A full structural check (ss_validate_tree) exists but runs only via an explicit validate method, not on attach.
A local peer that can write the backing file can leave the header valid while poisoning the tree links, so the next rank, min or max query dereferences an out-of-bounds node index, reading adjacent memory or crashing the process. |
| Data::RadixTree::Shared versions before 0.02 for Perl allow an out-of-bounds read via unvalidated node and arena indices in rdx_find_locked.
The attach-time validator rdx_validate_header checks the header scalars and region layout against the file size, but does not validate the node records it then trusts. rdx_find_locked indexes nodes[cur].children[k] and reads each node's label_off and label_len raw from the mmap'd segment, none bounded against the node count or the arena size.
A local peer that can write the backing file can leave the header valid while poisoning the node records, so a lookup dereferences an out-of-bounds node or arena index, reading adjacent memory or crashing the process. |
| Data::HashMap::Shared versions before 0.14 for Perl allow an out-of-bounds read via an unvalidated arena offset and length in shm_str_copy.
The attach-time validator shm_validate_header checks the header scalars and region layout against the file size, but does not validate the array contents it then trusts. shm_str_copy does memcpy(dst, arena + off, len) with off and len read raw from the mmap'd segment and unbounded, on the each, keys, values, pop, shift, take, swap, drain and cursor paths. The get path bounds off and len separately and is not affected.
A local peer that can write the backing file can leave the header valid while poisoning a record's offset and length, so iterating or draining the map copies a file-controlled offset and length out of the arena, reading adjacent memory or crashing the process. |
