| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in cockpit-files. A local unprivileged attacker can exploit a race condition during directory creation with owner assignment. By controlling a writable parent directory, the attacker can replace a newly created directory with a symbolic link (symlink) before the ownership change operation (chown) is applied. This allows the attacker to redirect the ownership change to an arbitrary file, potentially leading to information disclosure or unauthorized modification of sensitive files. |
| A flaw was found in cockpit-files. A low-privileged local user can exploit this vulnerability by crafting a directory containing a symbolic link (symlink) and then using the privileged "Paste as owner" function. This allows for arbitrary file ownership changes outside the intended pasted directory, leading to a compromise of data integrity. In some cases, this could also lead to reduced confidentiality if the new ownership grants unauthorized read access. Exploitation requires user interaction to select a non-original owner during the paste operation. |
| A vulnerability was identified in Tencent ncnn up to 44b02dabdcf97499281a4692ebd65bad73dcf8b6. Affected by this vulnerability is the function matmul_transb of the file src/layer/matmul.cpp of the component MatMul. The manipulation leads to out-of-bounds read. The attack can be initiated remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Contributor Arbitrary File Upload in Creator LMS <= 1.2.21 versions. |
| phpMyFAQ 3.2.0-alpha before 4.1.9 and 4.2.0-alpha before 4.2.0-beta contains an authentication bypass vulnerability that allows IdP-authenticated users to skip TOTP two-factor authentication through the Keycloak and Entra ID SSO callbacks. Attackers holding a valid or phished IdP identity linked to a 2FA-enabled account can complete the OIDC flow and obtain a fully authenticated session, including administrator accounts. |
| A flaw was found in environment-modules. A local attacker can exploit this vulnerability by placing a maliciously named modulefile in a location visible to the victim's `MODULEPATH`. When the victim uses Bash completion for `module` or `ml` commands, the malicious module name, containing shell metacharacters, is evaluated as a command. This can lead to arbitrary command execution in the completing user's shell, impacting their confidentiality, integrity, and availability. |
| A security flaw has been discovered in diem-project diem up to 116974edfb9a5b8bd69cb13586dc62bcdbb485ad. This issue affects the function dmBaseLinkTag::text of the file dmCorePlugin/lib/view/html/link/dmBaseLinkTag.php of the component dmWidget. Performing a manipulation of the argument text results in cross site scripting. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability has been found in diem-project diem up to 116974edfb9a5b8bd69cb13586dc62bcdbb485ad. Affected by this vulnerability is the function html of the file dmAdminPlugin/web/js/dmAdminCtrl.js of the component Version Check Service. The manipulation leads to cross site scripting. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: zero gaps in read-gaps folio to avoid writing back stale data
netfs_read_gaps() leaves gaps around a streaming write's dirty region
unread on the server side, so a short/EOF response there left stale
folio content that later got written back.
Zero it after the read completes, not before: netfs_wait_for_read()
returns rreq->transferred once ret >= 0, so build an iterator over the
same bvec array the read used, advance past ret, and zero the rest.
The dirty region already maps to sink pages in that array rather than
the real folio, so this can't touch it, and only the actual shortfall
gets zeroed instead of the whole gap upfront. |
| phpMyFAQ before 4.1.9 and 4.2.0-alpha before 4.2.0-beta does not require the current password when changing an account e-mail in the user control panel (UserController::updateData, api/user/data/update), checking only the session and CSRF token. An attacker with a hijacked session can set the e-mail to their own mailbox and use the password-reset flow to take over non-2FA accounts, including superadmin. |
| phpMyFAQ before 4.1.9 and 4.2.0-alpha before 4.2.0-beta contains an account enumeration vulnerability that allows unauthenticated attackers to confirm registered display names and emails via a distinct HTTP 409 response. Attackers can submit guest comments to the comment create endpoint with candidate user and mail values to link names to emails for targeted phishing. |
| A weakness has been identified in aircheng-org iWebShop-5 up to 5.16. The impacted element is the function IController::redirect of the file plugins/_userInfo/_userInfo.php of the component Login Redirect. This manipulation of the argument callback causes open redirect. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/clk: fix list cursor use after loop in nvkm_clk_ustate_update
If list_for_each_entry() exits without hitting a break then "pstate" is
not a valid pstate pointer. Introduce a "found" variable instead.
The check is reachable from userspace: nvkm_clk_ustate_update() takes the
pstate id straight from the 'pstate' debugfs file, so requesting an id
that is not in clk->states - or any id at all when the perf tables are
broken and the list is empty - makes the pstate->pstate != req test
dereference the list head cast to a struct nvkm_pstate, which is an
out-of-bounds read.
[Francesco: rebased on drm-misc-next, expanded the commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Use a 32-bit compare in xsk_map_gen_lookup
xsk_map_gen_lookup() loads a u32 key and compares it with max_entries
using BPF_JMP_IMM. BPF immediates are sign-extended to 64 bits, so a
max_entries value of 0x80000000 or higher becomes a threshold larger
than every zero-extended 32-bit key. An out-of-range index then skips
the bounds check and the generated lookup reads past xsk_map[].
Compare with BPF_JMP32_IMM so the check stays in 32-bit unsigned range. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: block2mtd: Fix divide error when erase_size is zero
The erase size is parsed from the "block2mtd" module parameter and can
be set to zero. add_device() then evaluates
if (size % erase_size)
with a zero divisor, which triggers a divide error:
divide error: 0000 [#1] PREEMPT SMP PTI
RIP: 0010:add_device drivers/mtd/devices/block2mtd.c:296 [inline]
RIP: 0010:block2mtd_setup2+0x592/0xda0 drivers/mtd/devices/block2mtd.c:459
Call Trace:
block2mtd_setup+0x27/0xe0 drivers/mtd/devices/block2mtd.c:476
param_attr_store+0x214/0x310 kernel/params.c:589
module_attr_store+0x65/0x90 kernel/params.c:904
kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345
...
Reject a zero erase size before performing the modulo operation so the
existing "erasesize must be a divisor of device size" error path
reports the invalid argument and frees the device. |
| The Post Voting System WordPress plugin through 1.0 does not properly sanitize and escape a parameter before using it in a SQL query, allowing unauthenticated users to perform SQL injection attacks. |
| phpMyFAQ from 4.2.0-alpha.2 before 4.2.0-beta lacks brute-force lockout in the removeTwofactorConfig() 2FA removal endpoint, allowing authenticated attackers to guess TOTP codes without limit. Attackers holding a hijacked session and CSRF token can repeatedly POST guesses to /api/user/remove-twofactor to permanently disable the victim's 2FA. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: reset num_napi when the napi vectors are freed
fbn->num_napi is the count of live napi vectors, each of which owns an
IRQ. The PM path had freed them without clearing the count.
fbnic_pm_suspend() tears the datapath down via ndo_stop() and frees the
IRQs, but leaves netif_running() true so resume knows to re-open. Resume
rebuilds the datapath in __fbnic_pm_resume() and fbnic_reset_queues() sets
num_napi and __fbnic_open() re-allocates the vectors.
When the datapath is torn down but never rebuilt, num_napi is left
pointing at freed vectors under 2 different scenarios:
- a PCIe error recovery that fails (fbnic_err_slot_reset() ->
__fbnic_pm_resume() returns an error -> PCI_ERS_RESULT_DISCONNECT), so
.resume never runs; or
- an __fbnic_open() that fails partway on resume and unwinds, freeing
the vectors after fbnic_reset_queues() has already set num_napi.
The netdev is then running with num_napi > 0 but napi[] freed, and the
eventual remove/unbind close re-enters fbnic_down() -> fbnic_dbg_down()
and dereferences the freed vectors:
BUG: kernel NULL pointer dereference, address: 0000000000000210
RIP: fbnic_dbg_down+0x28
Clear num_napi when the vectors are freed: in the suspend teardown (a
good resume re-establishes it before __fbnic_open()) and on the resume
open failure. A redundant ndo_stop() then walks an empty napi[]. The
normal ndo_stop() down/up cycle is untouched and keeps num_napi for the
next ndo_open(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis16400: fix unprotected debugfs reads
adis16400_serial_number_fops is open coded and never calls
debugfs_file_get(), so debugfs_remove_recursive() does not wait for a
read in progress and unbind frees the iio_dev underneath it.
Commit ae1d37a9bb4b ("iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE
instead of DEFINE_SIMPLE_ATTRIBUTE") converted product_id and
flash_count to DEFINE_DEBUGFS_ATTRIBUTE, which protects itself, but
moved all three files to debugfs_create_file_unsafe().
serial_number prints three registers as "%.4x-%.4x-%.4x" and
DEFINE_DEBUGFS_ATTRIBUTE() formats a single u64, so it cannot be
converted without changing what the file returns. adis16475 and
adis16550 already use debugfs_create_file() for their open coded
files. Use it here too. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: discard post-EOF pagecache when extending a file via clone range
cifs_remap_file_range() discarded the pagecache only for the folios
overlapping the destination region, so when a clone extends the file the
folio straddling the old EOF - which may hold data dirtied past EOF
through an mmap - was never dropped and became visible as file content
once the file was extended.
Start the discard at the smaller of fstart and the old EOF. i_size is
still old here, so nothing past the old EOF is flushed to the server. |
