| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler
The OTG branch of composite_setup() falls back to the first
configuration when none is selected:
if (cdev->config)
config = cdev->config;
else
config = list_first_entry(&cdev->configs,
struct usb_configuration, list);
if (!config)
goto done;
...
memcpy(req->buf, config->descriptors[0], value);
list_first_entry() never returns NULL. On an empty list it returns
container_of() of the list head. So the "if (!config)" check is dead.
When cdev->configs is empty, config points at the head inside struct
usb_composite_dev. config->descriptors[0] reads whatever sits at that
offset. The memcpy copies up to w_length bytes of it into the response
buffer.
cdev->configs can be empty in two cases. One is a teardown race on
gadget unbind with a control transfer in flight. The other is a driver
that sets is_otg before it adds a config. A reproducer that holds
cdev->configs empty triggers a KASAN fault in this branch.
Use list_first_entry_or_null() so the existing check does its job. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix potential deadlock in write-through mode
Fix netfs_advance_writethrough() to always unlock the supplied folio and to
mark it dirty if it isn't yet written to the end. Unfortunately, it can't
be marked for writeback until the folio is done with as that may cause a
deadlock against mmapped reads and writes.
Even though it has been marked dirty, premature writeback can't occur as
the caller is holding both inode->i_rwsem (which will prevent concurrent
truncation, fallocation, DIO and other writes) and ictx->wb_lock (which
will cause flushing to wait and writeback to skip or wait).
Note that this may be easier to deal with once the queuing of folios is
split from the generation of subrequests. |
| @fastify/multipart is a multipart form-data parser for Fastify. In versions from 5.3.0 up to but not including 10.1.1, when the busboy fileSize limit truncates a file part, the plugin clears its internal current-file reference while the underlying stream is still open. If the client then aborts the connection before sending the terminating boundary, the abort cleanup finds no stream to destroy, so saveRequestFiles() never settles, the request handler hangs, and the temporary file already written to disk is never cleaned up. An unauthenticated client can repeat this to permanently leak temporary files and suspended handler executions, leading to disk and event-loop exhaustion. The issue is fixed in @fastify/multipart 10.1.1. Users should upgrade to 10.1.1. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Remove tst_run from lwt_seg6local_prog_ops.
The syzbot reported that the lwt_seg6 related BPF ops can be invoked
via bpf_test_run() without without entering input_action_end_bpf()
first.
Martin KaFai Lau said that self test for BPF_PROG_TYPE_LWT_SEG6LOCAL
probably didn't work since it was introduced in commit 04d4b274e2a
("ipv6: sr: Add seg6local action End.BPF"). The reason is that the
per-CPU variable seg6_bpf_srh_states::srh is never assigned in the self
test case but each BPF function expects it.
Remove test_run for BPF_PROG_TYPE_LWT_SEG6LOCAL. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Fix mirred deadlock on device recursion
When the mirred action is used on a classful egress qdisc and a packet is
mirrored or redirected to self we hit a qdisc lock deadlock.
See trace below.
[..... other info removed for brevity....]
[ 82.890906]
[ 82.890906] ============================================
[ 82.890906] WARNING: possible recursive locking detected
[ 82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G W
[ 82.890906] --------------------------------------------
[ 82.890906] ping/418 is trying to acquire lock:
[ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[ 82.890906]
[ 82.890906] but task is already holding lock:
[ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[ 82.890906]
[ 82.890906] other info that might help us debug this:
[ 82.890906] Possible unsafe locking scenario:
[ 82.890906]
[ 82.890906] CPU0
[ 82.890906] ----
[ 82.890906] lock(&sch->q.lock);
[ 82.890906] lock(&sch->q.lock);
[ 82.890906]
[ 82.890906] *** DEADLOCK ***
[ 82.890906]
[..... other info removed for brevity....]
Example setup (eth0->eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth0
Another example(eth0->eth1->eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth1
tc qdisc add dev eth1 root handle 1: htb default 30
tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth0
We fix this by adding an owner field (CPU id) to struct Qdisc set after
root qdisc is entered. When the softirq enters it a second time, if the
qdisc owner is the same CPU, the packet is dropped to break the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix warning in poll cq direct mode
CQs allocated by ib_alloc_cq() always have a comp_handler. Though
in direct mode this handler is never expected to be called, it
is still called when the driver is reset, triggering the following
WARN_ONCE():
Call trace:
ib_cq_completion_direct+0x38/0x60
hns_roce_cq_completion+0x54/0x90 (hns_roce_hw_v2]
hns_roce_handle_device_err+Ox1c8/0x340 [hns_roce_hw_v2]
hns_roce_hw_v2_uninit_instance.constprop.0+0x34/0x70 [hns_roce_hw_v2]
hns_roce_hw_v2_reset_notify+0xc4/0xe0 [hns_roce_hw_v2]
hclge_notify_roce_client+0x60/0xbc [hclge]
hclge_reset_rebuild+0x48/0x34c [hclge]
hclge_reset_subtask+0xcc/0xec [hclge]
hclge_reset_service_task+0x80/0x160 [hclge]
hclge_service_task+0x50/0x80 (hclge]
process_one_work+0x1cc/0x4d0
worker_thread+0x154/0x414
kthread+0x104/0x144
ret_from_fork+0x10/0x18 |
| SiYuan 3.8.0 contains a path traversal / sensitive file exposure vulnerability in the RenderTemplate function (kernel/model/template.go), reachable via the POST /api/template/render endpoint (kernel/api/template.go). The endpoint restricts the supplied path only to the workspace directory (util.IsAbsPathInWorkspace) but, unlike the file API's refuseToAccess() blocklist, applies no sensitive-path exclusion. This allows an authenticated attacker to read sensitive workspace files, including conf/conf.json, which contains the API token and cookie signing key. The issue is fixed in v3.8.1. |
| SiYuan before v3.8.1 fails to filter invisible-tier content from SQL embed blocks, attribute-view keys, and attribute-view backlinks in publish mode. Anonymous readers can enumerate invisible content through these three listing mechanisms despite admin configuration marking content unlisted. |
| Improper control of a resource through its lifetime in Workers in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Low) |
| A flaw was found in the QEMU NBD Server. This vulnerability allows a denial of service (DoS) attack via improper synchronization during socket closure when a client keeps a socket open as the server is taken offline. |
| Improper resource exposure in StreamsAPI in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to potentially bypass web origin policy into a privileged page via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del
fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at
the 'out:' label, but only calls the matching get_cpu_var() after the
'i < 0' early-return check. When event->hw.idx is negative the
function jumps to 'out:' without having taken get_cpu_var(), and the
trailing put_cpu_var() then issues an unmatched preempt_enable(),
underflowing preempt_count.
On a CONFIG_PREEMPT=y kernel preempt_count would underflow and
eventually present as a 'scheduling while atomic' BUG.
Move put_cpu_var() to pair with get_cpu_var() so the percpu access is
correctly bracketed and the 'out:' label only handles perf_pmu_enable. |
| In Zimbra Collaboration before 10.1.17, a local file inclusion (LFI) vulnerability exists in the Zimbra Classic Web Client due to improper validation of the fu request parameter. An unauthenticated attacker can exploit this vulnerability by supplying a crafted path, potentially allowing unauthorized disclosure of protected files, such as WEB-INF/web.xml, within the web application directory. This occurs in the Forward servlet. |
| OpenTelemetry-Go is the Go implementation of OpenTelemetry. From version 0.11.0 through 1.44.0, the OpenTracing bridge's bridgeSpan contains an unsynchronized extraBaggageItems map which can cause a panic. Because Go maps are not safe for concurrent read/write access, concurrent SetBaggageItem and correlation.MapFromContext calls on the same hooked bridgeSpan can trigger a fatal runtime error—such as concurrent map read and map write or concurrent map iteration and map write—terminating the process and causing denial of service. This issue is fixed in version 1.45.0. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix another iunlink infinite loop bug in online fsck
xrep_iunlink_resolve_bucket is supposed to reconstruct as much of the
incore prev and next unlinked list pointers based on what it finds on
disk and in memory before we move on to relinking the truly lost inodes
back into the unlinked list. However, it's still vulnerable to infinite
loops that come in via the next_unlinked pointers.
Fix this problem by remembering which inodes we've already seen and
checking new agino pointers against that. If a bit is already set,
either this is a loop or the inode has nonzero link count. We'll deal
with the second case in a subsequent patch. |
| GitHub CLI (gh) is GitHub's official command line tool. Versions 2.28.0 through 2.97.0 bind the local listener created by gh codespace ports forward to all available network interfaces by default. While port forwarding is active, a service in a Codespace can therefore become reachable through the user's non-loopback local IP addresses by other hosts that can route to the user's machine. This behavior does not change the GitHub-side visibility of the Codespaces port. Instead, it exposes the forwarded service through a wildcard-bound listener on the user's local machine, even when the source Codespaces port remains private. Exploitation requires a network-adjacent attacker to reach the victim's machine while forwarding is active. This issue is fixed in version 2.98.0. |
| In the Linux kernel, the following vulnerability has been resolved:
fsverity: Fix bpf_get_fsverity_digest() dynptr assumptions
The BPF verifier and the dynptr abstraction ensure that the memory space
referenced by a dynptr remains valid. They do not, however, provide any
guarantee that the contents of the memory are stable. kfuncs are
expected to remain memory-safe even if concurrent modifications occur.
bpf_get_fsverity_digest() didn't follow that: it could crash if
arg->digest_size was concurrently modified.
Fix that by using the known-good value hash_alg->digest_size instead.
Also widen 'dynptr_sz' and 'out_digest_sz' to u64 to match the return
type of __bpf_dynptr_size(). It doesn't appear that it can actually be
more than INT_MAX currently (since __bpf_dynptr_data_rw() excludes
file-based pointers), but the correct type might as well be used. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: make error counter atomic
The error counter "v->corrupted_errs" was not atomic, thus it could be
subject to race conditions. The call to
dm_audit_log_target("max-corrupted-errors") may be skipped due to the
races. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: tegra: do not call pinctrl for GPIO direction
tegra_gpio_direction_input() and tegra_gpio_direction_output() already
program the GPIO controller direction registers directly. The additional
pinctrl_gpio_direction_input/output() calls do not add a Tegra pinctrl
operation, because the Tegra pinmux ops provide GPIO request/free
handling but no gpio_set_direction hook.
The extra call still enters the pinctrl core and takes pctldev->mutex.
Shared GPIO users can call the direction path while holding their
per-line spinlock, so this otherwise redundant pinctrl direction call can
sleep in an atomic context.
This was found by our static analysis tool and then confirmed by manual
review of tegra_gpio_probe(), the Tegra GPIO direction callbacks and the
Tegra pinctrl ops. The reviewed path has a default non-sleeping
struct gpio_chip while the direction callback still enters the pinctrl
mutex path.
A directed runtime validation kept the same non-sleeping chip registration
and drove:
gpio_shared_proxy_direction_output()
gpiod_direction_output_raw_commit()
tegra_gpio_direction_output()
pinctrl_gpio_direction_output()
Lockdep reported a sleep-in-atomic warning with the shared GPIO spinlock
held and pinctrl_get_device_gpio_range() plus tegra_gpio_direction_output()
on the stack.
Do not mark the whole chip as can_sleep to paper over this: can_sleep
describes whether get()/set() may sleep, and Tegra value access is MMIO.
Remove the redundant pinctrl direction calls and keep pinctrl involvement
in the existing request/free path. |
| This issue was addressed through improved state management. This issue is fixed in Safari 26.6, iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, visionOS 26.6. Visiting a website may lead to an app denial-of-service. |
