| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf,lsm: Drop bpf_prog_free from sleepable_lsm_hooks
__bpf_prog_put_rcu() is the call_rcu() callback for non-sleepable programs.
security_bpf_prog_free() called from there fires bpf_prog_free in softirq;
if a sleepable LSM prog is attached to that hook, might_fault() BUGs:
BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 5038
preempt_count: 101, expected: 0
Call Trace:
<IRQ>
__bpf_prog_enter_sleepable+0x1cd/0x320 kernel/bpf/trampoline.c:1255
bpf_trampoline_6442549705+0x53/0xd7
security_bpf_prog_free+0xde/0x130 security/security.c:5465
__bpf_prog_put_rcu+0xab/0xd0 kernel/bpf/syscall.c:2365
rcu_do_batch kernel/rcu/tree.c:2617 [inline]
handle_softirqs+0x236/0x800 kernel/softirq.c:622
</IRQ>
The call_rcu/call_rcu_tasks_trace split reflects the freed program's
sleepability, not that of any attached observer.
security_bpf_prog_free() also frees prog->aux->security, which has to stay
after the grace period, so drop bpf_prog_free from sleepable_lsm_hooks
rather than move the call. Non-sleepable observers still run there. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Copy per-CPU map value padding in copy_map_value_long()
In kernel, per-CPU map elements are stored with
round_up(map->value_size, 8) bytes. On UAPI lookup paths, it copies the
rounded size for each CPU into a temporary buffer.
However, copy_map_value_long() passes 'map->value_size' to
bpf_obj_memcpy(). When the map has special fields, bpf_obj_memcpy() copies
around those fields with memcpy(), and does not copy the tail padding
between 'map->value_size' and round_up(map->value_size, 8).
The temporary UAPI lookup buffers are allocated without __GFP_ZERO. As a
result, when the per-CPU map's value size is not equal to
round_up(map->value_size, 8), UAPI LOOKUP_ELEM and its variants can return
stale heap contents from that padding to user space. The same issue
applies to bpf_iter for per-CPU maps.
Pass round_up(map->value_size, 8) to bpf_obj_memcpy() from
copy_map_value_long(), so per-CPU maps both with and without special
fields copy the entire per-CPU slot. Remove the now redundant round_up()
from bpf_obj_memcpy()'s long_memcpy path. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/fair: Fix overflow in update_tg_cfs_runnable()
A divide-by-zero crash is observed when running hackbench:
[14697.488452] CPU: 112 UID: 0 PID: 124791 Comm: hackbench Not tainted 7.1.0-rc2+
[14697.492627] RIP: 0010:propagate_entity_load_avg+0x35f/0x3e0
[14697.506799] <TASK>
[14697.507411] __dequeue_task+0x2b4/0xc70
[14697.508677] dequeue_task_fair+0x36/0x370
[14697.509047] dequeue_task+0x101/0x2f0
[14697.509426] __schedule+0x1b1/0x1a00
[14697.510868] anon_pipe_read+0x3da/0x450
[14697.511400] vfs_read+0x361/0x390
[14697.512053] __x64_sys_read+0x19/0x30
The divide-by-zero happens here:
if (scale_load_down(gcfs_rq->load.weight)) {
load_sum = div_u64(gcfs_rq->avg.load_sum,
scale_load_down(gcfs_rq->load.weight));
}
gcfs_rq->load.weight is an insane large value and is truncated
to the lower 32 bits by div_u64, which happen to be 0.
Using AI for investigation, the cause is a u32 overflow in
update_tg_cfs_runnable(), and flat pickup became a victim when using
tg_tasks():
u32 new_sum, divider;
...
new_sum = se->avg.runnable_avg * divider; <-- boom
The following sequence shows how this triggers the crash:
propagate_entity_load_avg()
update_tg_cfs_runnable() # u32 overflow corrupts runnable_sum
__update_load_avg_cfs_rq()
___update_load_avg() # computes insane runnable_avg
update_tg_load_avg() # propagates to tg->runnable_avg
update_cfs_group()
calc_concur_shares()
tg_tasks() # long-to-int truncation, negative nr
reweight_entity() # corrupted se->load.weight
update_load_add() # corrupted cfs_rq->load.weight
propagate_entity_load_avg()
update_tg_cfs_load()
div_u64() # divide-by-zero
Fix by widening new_sum from u32 to u64 (no need to force tg_tasks()
to return unsigned long after this fix) |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl_audmix: rework runtime PM handling in probe
After pm_runtime_enable() the AUDMIX block is powered off and stays
suspended until the first runtime resume. Register writes issued between
probe() and the first resume (e.g. from DAPM or ALSA control paths)
target unpowered hardware and cause a system hang.
Fix this by calling pm_runtime_resume_and_get() immediately after
pm_runtime_enable() to power the hardware up and enable its clocks.
Release the reference afterwards with pm_runtime_put() to allow the
runtime PM framework to suspend the device and switch the regmap to
cache-only mode when idle.
When CONFIG_PM is disabled or runtime PM is not enabled, pm_runtime_*
calls are stubs that do not power up the hardware. Handle this case
explicitly by calling fsl_audmix_runtime_resume() directly so the
hardware is always initialised and its clocks are enabled, ensuring
register accesses succeed regardless of PM configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/mbox: Clamp mailbox output allocation to the payload size
CXL_MEM_SEND_COMMAND bounds the user's in.size to the mailbox payload
size but leaves out.size unbounded, then cxl_mbox_cmd_ctor() calls
kvzalloc(out.size). A large out.size drives a huge allocation, above
INT_MAX it WARNs and taints, and with panic_on_warn=1 it panics.
The transport __cxl_pci_mbox_send_cmd() already clamps the response copy
to min(out.size, payload_size, device len), so the output buffer is
never written beyond payload_size. Clamp the allocation to payload_size
too, matching the RAW path. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: bound device-supplied profile index
kone_keep_values_up_to_date() and kone_profile_activated() use an
8-bit, device-supplied profile value as an index into the 5-element
kone->profiles[] array without a range check. A malicious USB device
claiming the Roccat Kone id can send a switch-profile event (or a
startup_profile read at probe) with an out-of-range value and make the
driver read out of bounds; the result is exposed via the actual_dpi
sysfs attribute.
Reject out-of-range indices in both paths.
This was found with static analysis and confirmed with the KUnit test
added in the following patch (KASAN: slab-out-of-bounds). |
| The Partial Shipment for Woocommerce plugin for WordPress is vulnerable to Missing Authorization in versions up to, and including, 3.4 via the wxp_order_shipment, wxp_order_item_shipment, and wxp_order_set_shipped AJAX actions. This is due to the AJAX handlers in woocommerce-partial-shipment.php (registered at lines 60–62 and implemented at lines 228, 263, and 291) lacking both capability checks and nonce verification, and not validating the calling user's ownership of the supplied order_id. This makes it possible for authenticated attackers, with Subscriber-level access and above, to read arbitrary order item details (names, quantities, shipped counts) belonging to any customer and to modify the shipment status / shipped quantities of any order, which can also trigger order status transitions via the wxp_order_status action. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_typec: Reject out-of-bounds PD cap count
cros_typec_register_partner_pdos() copies the partner PDOs from the EC
TYPEC_STATUS response into the fixed caps_desc.pdo[PDO_MAX_OBJECTS] array.
memcpy(caps_desc.pdo, resp->source_cap_pdos,
sizeof(u32) * resp->source_cap_count);
...
memcpy(caps_desc.pdo, resp->sink_cap_pdos,
sizeof(u32) * resp->sink_cap_count);
PDO_MAX_OBJECTS is 7. source_cap_count and sink_cap_count are u8 fields
from the EC. The only check is that they are not both zero. If either is
larger than 7, the memcpy writes past the end of the array on the stack.
A count of 255 overflows it by about 1 KB. The EC source arrays are only
seven entries wide. A larger count reads past them too.
The ChromeOS EC firmware caps these counts today, so a compliant setup
does not hit this. The kernel should still validate these values rather
than trust them.
Validate the counts in cros_typec_register_partner_pdos() next to the
memcpy. Skip the PDO registration if either count is above PDO_MAX_OBJECTS.
The rest of cros_typec_handle_status() still runs so events are handled
and cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: validate the persisted dirty_tail chain at load
The writeback worker follows the persisted dirty_tail chain, which is
decoded from the cache device independently of the key_tail chain that
cache_replay() walks and bounds. A crafted image, whose on-media fields are
authenticated only by a crc32c with a fixed seed, can aim dirty_tail at a
chain of last ksets that never terminates, so cache_writeback_fn() re-arms
itself with no delay forever.
Walk the dirty_tail chain once at load with the same hop cap cache_replay()
uses and fail the table load with -EIO if it does not reach an end within
n_segs hops. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Do not treat master device as a duplicate target
i3c_master_search_i3c_dev_duplicate() searches the bus for another I3C
device with the same PID as the reference device. The search can match
master->this, causing the controller itself to be returned as a
duplicate.
Since the controller is not a target device, it cannot be a duplicate of
one. Exclude master->this from matching so that the function only
returns real duplicate target devices. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix use-after-free of master->this
sysfs attribute callbacks for the master controller device dereference
master->this. However, master->this is freed in
i3c_master_detach_free_devs() before the master device itself is
released.
As a result, sysfs accesses can dereference a freed master->this
pointer, leading to a use-after-free.
Keep master->this alive until i3c_masterdev_release(), which is called
after the master device and its sysfs state are being torn down. Do not
free master->this as part of the normal device detach path.
On the error path in i3c_master_set_info(), reset master->this and
bus.cur_master to NULL before freeing the allocated device. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix recursive locking during device registration
i3c_master_register_new_i3c_devs() registers newly discovered devices
while holding i3c_bus_normaluse_lock(), a down_read(). device_register()
can immediately probe the device, and probe callbacks typically invoke
I3C helpers that take i3c_bus_normaluse_lock() again, leading to a
recursive acquisition of the same rwsem. rwsems do not support recursive
read locking and can deadlock when a writer is waiting. See the
"Recursive read locks" section of Documentation/locking/lockdep-design.rst.
For example, with Intel LPSS I3C, LOCKDEP generates a WARNING like:
# echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/unbind
# echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/bind
WARNING: possible recursive locking detected
kworker/5:1/94 is trying to acquire lock:
ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_device_match_id+0x45/0x370
but task is already holding lock:
ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_master_reg_work_fn+0x21/0x5f0
Fix this by separating device creation from device registration.
Populate desc->dev under the maintenance lock, collect the devices that
still need registration into a local list, then release the lock before
calling device_register(). Finally retake the lock and clean up any
devices that failed to register.
Use the maintenance lock rather than the normal-use lock while adding
device objects. A write-side maintenance lock prevents readers from
observing a partially initialized desc->dev during initial device
population, or desc->dev disappearing if registration fails.
The local list requires a list node, so add a list node member to struct
i3c_device. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: atomically update mac addresses
When a MAC address is updated in batadv_dat_entry_add(), it is done using a
simple copy function. A parallel reader might only see parts of this
update. In worst case, the reader is transporting the half updated MAC
address over the network or is creating an ARP response using it -
poisoning the ARP cache.
atomic64_t can be used to store the 48 bit of a mac address. A reader will
then either see the old mac address or the new one - never a mixture of
both. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-privacy: Fix race condition
Accessing priv->features_present needs to happen with the list mutex
being held, otherwise priv can be freed at any moment. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: RISC-V: Fix riscv_acpi_add_prt_dep() loop handling
The loop in riscv_acpi_add_prt_dep() includes error conditions that are
handled in a dubious - if not outright wrong - way, by continuining the
loop (which skips and misses the entry pointer update to point to the next
entry).
Rewrite the loop as a for loop (that handles the continuation correctly)
and wrap the condition and update statements using helper functions to make
it cleaner. |
| In the Linux kernel, the following vulnerability has been resolved:
printk: Fix possible console use-after-free
When emitting a record via legacy printing, it is possible that a handover
to another legacy printing context occurs. When a context has performed a
handover, the console SRCU read lock is released and the pointer to the
console struct might now be invalid. Therefore, after calling
nbcon_legacy_emit_next_record() or console_emit_next_record(), it is
necessary to check if a handover occurred _before_ further @con usage.
Sashiko pointed out that console_flush_one_record() was not doing this.
In console_flush_one_record(), after emitting a record, move the further
usage of @con after the handover check. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: r8a66597: avoid double free of ep0_req in probe error path
If usb_add_gadget_udc() fails, r8a66597_probe() jumps to err_add_udc
and frees ep0_req, then falls through to clean_up2 where ep0_req is
freed again when it is non-NULL.
Remove the redundant free from err_add_udc and keep the cleanup in
clean_up2 so the request is released exactly once.
Issue found using a prototype static analysis tool
and confirmed by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: media: ipu7: fix pm_runtime refcount leak in ipu7_resume()
ipu7_resume() calls pm_runtime_get_sync() before resuming the device.
If the runtime PM resume fails, the usage count remains incremented, but
the error path returns without dropping the reference.
Use pm_runtime_resume_and_get() instead, which balances the usage count
on failure and avoids the leak. Keep returning 0 on error, as resume
callbacks should not propagate failures to the PM core, matching the
behaviour of the ipu6 driver. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gdsc: tear down per-domain genpds in gdsc_unregister()
gdsc_unregister() removes the OF provider entry and tears down the
parent/subdomain wiring, but never calls pm_genpd_remove() on the
individual generic_pm_domain structures registered by gdsc_init():
void gdsc_unregister(struct gdsc_desc *desc)
{
struct device *dev = desc->dev;
size_t num = desc->num;
gdsc_pm_subdomain_remove(desc, num);
of_genpd_del_provider(dev->of_node);
}
That leaves dangling entries on the global gpd_list. After a provider
unbind/rebind cycle (deferred-probe replay during early boot, real
module unload of a clk driver that owns GDSCs, or an OF-overlay tear-
down) the next gdsc_init() will end up trying to re-register a name
that is still in the list and pm_genpd_init() returns -EEXIST.
While we are here, flip the order so the consumer-facing OF provider
entry is the first thing removed -- otherwise a fresh
of_genpd_get_from_provider() call racing with the teardown could
attach to a domain that is mid-removal.
Iterate the scs[] array and pm_genpd_remove() each registered domain
after the subdomain links are torn down. The regulators stay devm-
managed (devm_regulator_get_optional() in gdsc_register()), so the
release happens automatically when the underlying device is unbound;
just the genpd accounting needs to be undone explicitly. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-apple: Use acquire/release for queue enabled state
apple_nvme_init_queue() initializes queue state and then marks the queue
enabled. The interrupt and request paths check enabled before using that
queue state.
The old wmb() after WRITE_ONCE(enabled, true) does not publish the
earlier initialization before enabled becomes visible. Use a release store
when enabling the queue and acquire loads when testing it.
Although the shutdown-side enabled accesses are not used for publishing
queue initialization, use helpers for them as well for consistency. |
