| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the IKEv2 feature of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device that may also impact the availability of services to devices elsewhere in the network.
This vulnerability is due to memory exhaustion caused by not freeing memory during IKEv2 packet processing. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to exhaust resources, causing a DoS condition that will eventually require the device to manually reload. |
| A vulnerability in the IKEv2 feature of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device that may impact the availability of services to devices elsewhere in the network.
This vulnerability is due to a memory leak when parsing IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to exhaust resources, causing a DoS condition that will eventually require the device to be manually reloaded. |
| Multiple memory leaks in isakmpd in OpenBSD 3.4 and earlier allow remote attackers to cause a denial of service (memory exhaustion) via certain ISAKMP packets, as demonstrated by the Striker ISAKMP Protocol Test Suite. |
| The do_fork function in Linux 2.4.x before 2.4.26, and 2.6.x before 2.6.6, does not properly decrement the mm_count counter when an error occurs after the mm_struct for a child process has been activated, which triggers a memory leak that allows local users to cause a denial of service (memory exhaustion) via the clone (CLONE_VM) system call. |
| The audit system in Linux kernel 2.6.6, and other versions before 2.6.13.4, when CONFIG_AUDITSYSCALL is enabled, uses an incorrect function to free names_cache memory, which prevents the memory from being tracked by AUDITSYSCALL code and leads to a memory leak that allows attackers to cause a denial of service (memory consumption). |
| Memory leak in FreeBSD 4.5 and earlier allows remote attackers to cause a denial of service (memory exhaustion) via ICMP echo packets that trigger a bug in ip_output() in which the reference count for a routing table entry is not decremented, which prevents the entry from being removed. |
| Memory leak in the request_key_auth_destroy function in request_key_auth in Linux kernel 2.6.10 up to 2.6.13 allows local users to cause a denial of service (memory consumption) via a large number of authorization token keys. |
| Memory leak in NNTP service in Windows NT 4.0 and Windows 2000 allows remote attackers to cause a denial of service (memory exhaustion) via a large number of malformed posts. |
| Memory leak in ProFTPd 1.2.0rc2 allows remote attackers to cause a denial of service via a series of USER commands, and possibly SIZE commands if the server has been improperly installed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: fix potential skb->frags overflow in RX path
When receiving data in the DPMAIF RX path,
the t7xx_dpmaif_set_frag_to_skb() function adds
page fragments to an skb without checking if the number of
fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow
in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and
potentially causing kernel crashes or other undefined behavior.
This issue was identified through static code analysis by comparing with a
similar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76:
fix array overflow on receiving too many fragments for a packet").
The vulnerability could be triggered if the modem firmware sends packets
with excessive fragments. While under normal protocol conditions (MTU 3080
bytes, BAT buffer 3584 bytes),
a single packet should not require additional
fragments, the kernel should not blindly trust firmware behavior.
Malicious, buggy, or compromised firmware could potentially craft packets
with more fragments than the kernel expects.
Fix this by adding a bounds check before calling skb_add_rx_frag() to
ensure nr_frags does not exceed MAX_SKB_FRAGS.
The check must be performed before unmapping to avoid a page leak
and double DMA unmap during device teardown. |
| A vulnerability in the DHCP client functionality of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to exhaust available memory.
This vulnerability is due to improper validation of incoming DHCP packets. An attacker could exploit this vulnerability by repeatedly sending crafted DHCPv4 packets to an affected device. A successful exploit could allow the attacker to exhaust available memory, which would affect availability of services and prevent new processes from starting, resulting in a Denial of Service (DoS) condition that would require a manual reboot.
Note: On Cisco Secure FTD Software, this vulnerability does not affect management interfaces. |
| A vulnerability was found in Undertow. This issue requires enabling the learning-push handler in the server's config, which is disabled by default, leaving the maxAge config in the handler unconfigured. The default is -1, which makes the handler vulnerable. If someone overwrites that config, the server is not subject to the attack. The attacker needs to be able to reach the server with a normal HTTP request. |
| A vulnerability, which was classified as problematic, was found in TechPowerUp GPU-Z 2.23.0. Affected is the function sub_140001880 in the library GPU-Z.sys of the component 0x8000645C IOCTL Handler. The manipulation leads to memory leak. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability in the management and VPN web servers of the Remote Access SSL VPN feature of Cisco Secure Firewall ASA Software and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to unexpectedly stop responding, resulting in a DoS condition.
This vulnerability is due to ineffective validation of user-supplied input during the Remote Access SSL VPN authentication process. An attacker could exploit this vulnerability by sending a crafted request to the VPN service on an affected device. A successful exploit could allow the attacker to cause a DoS condition where the device stops responding to Remote Access SSL VPN authentication requests. |
| Missing release of memory after effective lifetime in the UEFI OobRasMmbiHandlerDriver module for some Intel(R) reference server platforms may allow a privileged user to enable denial of service via local access. |
| On affected platforms running Arista EOS with SNMP configured, if “snmp-server transmit max-size” is configured, under some circumstances a specially crafted packet can cause the snmpd process to leak memory. This may result in the snmpd process being terminated (causing SNMP requests to time out until snmpd is restarted) and memory pressure for other processes on the switch. Increased memory pressure can cause processes other than snmpd to be at risk for unexpected termination as well. |
| Nanopb is a small code-size Protocol Buffers implementation. When the compile time option PB_ENABLE_MALLOC is enabled, the message contains at least one field with FT_POINTER field type, custom stream callback is used with unknown stream length. and the pb_decode_ex() function is used with flag PB_DECODE_DELIMITED, then the pb_decode_ex() function does not automatically call pb_release(), like is done for other failure cases. This could lead to memory leak and potential denial-of-service. This vulnerability is fixed in 0.4.9.1. |
| Undici is an HTTP/1.1 client for Node.js. Prior to versions 5.29.0, 6.21.2, and 7.5.0, applications that use undici to implement a webhook-like system are vulnerable. If the attacker set up a server with an invalid certificate, and they can force the application to call the webhook repeatedly, then they can cause a memory leak. This has been patched in versions 5.29.0, 6.21.2, and 7.5.0. As a workaound, avoid calling a webhook repeatedly if the webhook fails. |
| Redis through 8.0.3 allows memory consumption via a multi-bulk command composed of many bulks, sent by an authenticated user. This occurs because the server allocates memory for the command arguments of every bulk, even when the command is skipped because of insufficient permissions. NOTE: this is disputed by the Supplier because abuse of the commands network protocol is not a violation of the Redis Security Model. |
| A memory leak could occur when a remote peer abruptly closes the socket without sending a GOAWAY notification. Additionally, if an invalid header was detected by nghttp2, causing the connection to be terminated by the peer, the same leak was triggered. This flaw could lead to increased memory consumption and potential denial of service under certain conditions.
This vulnerability affects HTTP/2 Server users on Node.js v18.x, v20.x, v22.x and v23.x. |
