| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: sideband: fix ring sg table pages leak
xhci_ring_to_sgtable() allocates a temporary pages array and
uses it to build the returned sg_table with
sg_alloc_table_from_pages().
The error paths free the pages array, but the success path
returns the sg_table without freeing it. This leaks the temporary
array every time a sideband client gets an endpoint or event ring
buffer.
Free the pages array after sg_alloc_table_from_pages() succeeds.
The returned sg_table has its own scatterlist entries and does not
depend on the temporary array after construction. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: altera: Fix resource leaks on probe failure
The chained IRQ handler is set during probe, but is only removed during the
driver remove(). If pci_host_probe() fails, the handler and INTx IRQ
domain remain set even though the devm-managed host bridge storage
containing struct altera_pcie will be released, leaving the handler with
a stale data pointer.
Interrupts are also enabled before pci_host_probe() is called. If probe
fails after that point, the controller interrupt source should be disabled
before the chained handler and INTx domain are removed.
So set the chained handler only after the INTx domain has been created.
Disable controller interrupts during IRQ teardown, and tear the IRQ setup
down if pci_host_probe() fails.
[mani: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_pci: fix vq info pointer lookup via wrong index
Unbinding a virtio balloon device:
echo virtio0 > /sys/bus/virtio/drivers/virtio_balloon/unbind
triggers a NULL pointer dereference. The dmesg says:
BUG: kernel NULL pointer dereference, address: 0000000000000008
[...]
RIP: 0010:__list_del_entry_valid_or_report+0x5/0xf0
Call Trace:
<TASK>
vp_del_vqs+0x121/0x230
remove_common+0x135/0x150
virtballoon_remove+0xee/0x100
virtio_dev_remove+0x3b/0x80
device_release_driver_internal+0x187/0x2c0
unbind_store+0xb9/0xe0
kernfs_fop_write_iter.llvm.11660790530567441834+0xf6/0x180
vfs_write+0x2a9/0x3b0
ksys_write+0x5c/0xd0
do_syscall_64+0x54/0x230
entry_SYSCALL_64_after_hwframe+0x29/0x31
[...]
</TASK>
The virtio_balloon device registers 5 queues (inflate, deflate, stats,
free_page, reporting) but only the first two are unconditional. The
stats, free_page and reporting queues are each conditional on their
respective feature bits. When any of these features are absent, the
corresponding vqs_info entry has name == NULL, creating holes in the
array.
The root cause is an indexing mismatch introduced when vq info storage
was changed to be passed as an argument. vp_find_vqs_msix() and
vp_find_vqs_intx() store the info pointer at vp_dev->vqs[i], where 'i'
is the caller's sparse array index. However, the virtqueue itself gets
vq->index assigned from queue_idx, a dense index that skips NULL
entries. When holes exist, 'i' and queue_idx diverge. Later,
vp_del_vqs() looks up info via vp_dev->vqs[vq->index] using the dense
index into the sparsely-populated array, and hits NULL.
Fix this by storing info at vp_dev->vqs[queue_idx] instead of
vp_dev->vqs[i], so the store index matches the lookup index
(vq->index). Apply the fix to both the MSIX and INTX paths. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: chaoskey: Fix slab-use-after-free in chaoskey_release()
The chaoskey driver has a use-after-free bug in its release routine.
If the user closes the device file after the USB device has been
unplugged, a debugging log statement will try to access the
usb_interface structure after it has been deallocated:
BUG: KASAN: slab-use-after-free in dev_driver_string (drivers/base/core.c:2406)
Read of size 8 at addr ffff888168e8a0b8 by task chaoskey_raw_re/10106
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
dev_driver_string (drivers/base/core.c:2406)
__dynamic_dev_dbg (lib/dynamic_debug.c:906)
chaoskey_release (drivers/usb/misc/chaoskey.c:323)
__fput (fs/file_table.c:510)
fput_close_sync (fs/file_table.c:615)
__x64_sys_close (fs/open.c:1507 fs/open.c:1492 fs/open.c:1492)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The driver's last reference to the interface structure is dropped in
the chaoskey_free() routine, so the code must not use the interface --
even in a debugging statement -- after that routine returns.
(Exception: If we know that another reference is held by someone else,
such as the device core while the disconnect routine runs, there's no
problem. Thanks to Johan Hovold for pointing this out.)
Since the bad access is part of an unimportant debugging statement,
we can fix the problem simply by removing the whole statement. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: fix disconnect UAF in client teardown
usbio_disconnect() walks usbio->cli_list in reverse and uninitializes each
auxiliary device. auxiliary_device_uninit() drops the device reference, and
for an unbound child that can run usbio_auxdev_release() and free the
containing struct usbio_client.
list_for_each_entry_reverse() advances after the loop body by reading
client->link.prev. If the current client is freed by
auxiliary_device_uninit(), the iterator dereferences freed memory.
Use list_for_each_entry_safe_reverse() so the previous client is
cached before the body can drop the final reference. This preserves
reverse teardown order while keeping the next iterator cursor independent
of the current client's lifetime.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in usbio_disconnect+0x12e/0x150
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? usbio_disconnect+0x12e/0x150
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x188/0x320
? usbio_disconnect+0x12e/0x150
kasan_report+0xe0/0x110
? usbio_disconnect+0x12e/0x150
usbio_disconnect+0x12e/0x150
usb_unbind_interface+0xf3/0x400
really_probe+0x316/0x660
__driver_probe_device+0x106/0x240
driver_probe_device+0x4a/0x110
__device_attach_driver+0xf1/0x1a0
? __pfx___device_attach_driver+0x10/0x10
bus_for_each_drv+0xf9/0x160
? __pfx_bus_for_each_drv+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? trace_hardirqs_on+0x18/0x130
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x44/0x60
__device_attach+0x133/0x2a0
? __pfx___device_attach+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? do_raw_spin_unlock+0x9a/0x100
? srso_alias_return_thunk+0x5/0xfbef5
device_initial_probe+0x55/0x70
bus_probe_device+0x4a/0xd0
device_add+0x9b9/0xc10
? __pfx_device_add+0x10/0x10
? _raw_spin_unlock_irqrestore+0x44/0x60
? srso_alias_return_thunk+0x5/0xfbef5
? lockdep_hardirqs_on_prepare+0xea/0x1a0
? srso_alias_return_thunk+0x5/0xfbef5
? usb_enable_lpm+0x3c/0x260
usb_set_configuration+0xb64/0xf20
usb_generic_driver_probe+0x5f/0x90
usb_probe_device+0x71/0x1b0
really_probe+0x46b/0x660
__driver_probe_device+0x106/0x240
driver_probe_device+0x4a/0x110
__device_attach_driver+0xf1/0x1a0
? __pfx___device_attach_driver+0x10/0x10
bus_for_each_drv+0xf9/0x160
? __pfx_bus_for_each_drv+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? trace_hardirqs_on+0x18/0x130
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x44/0x60
__device_attach+0x133/0x2a0
? __pfx___device_attach+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? do_raw_spin_unlock+0x9a/0x100
? srso_alias_return_thunk+0x5/0xfbef5
device_initial_probe+0x55/0x70
bus_probe_device+0x4a/0xd0
device_add+0x9b9/0xc10
? __pfx_device_add+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? add_device_randomness+0xb7/0xf0
usb_new_device+0x492/0x870
hub_event+0x1b10/0x29c0
? __pfx_hub_event+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x187/0x300
? process_one_work+0x475/0xb90
? srso_alias_return_thunk+0x5/0xfbef5
? lock_release+0xc8/0x290
? srso_alias_return_thunk+0x5/0xfbef5
process_one_work+0x4d7/0xb90
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_hub_event+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item
commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work
run loop") fixed the obvious case where io_worker_handle_work() took one
exit-bit snapshot before draining pending work, but the fix stops one
level too early.
io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work
run loop, yet it still snapshots that bit once before processing a whole
dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT
after the first linked item has started, the remaining linked items can
still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue
running after exit has begun.
Move the check further inside, so it covers linked items too. Note: this
is a syzbot special as it loves setting up tons of slow linked work on
weird devices like msr that take forever to read, and immediately close
the ring. Exit then takes a long time. |
| In the Linux kernel, the following vulnerability has been resolved:
media: nxp: imx8-isi: Fix use-after-free on remove
KASAN reports a slab-use-after-free in __media_entity_remove_link()
during rmmod of imx8_isi:
BUG: KASAN: slab-use-after-free in __media_entity_remove_link+0x608/0x650
Read of size 2 at addr ffff0000d47cb02a by task rmmod/724
Call trace:
__media_entity_remove_link+0x608/0x650
__media_entity_remove_links+0x78/0x144
__media_device_unregister_entity+0x150/0x280
media_device_unregister_entity+0x48/0x68
v4l2_device_unregister_subdev+0x158/0x300
v4l2_async_unbind_subdev_one+0x22c/0x358
v4l2_async_nf_unbind_all_subdevs+0xfc/0x1c0
v4l2_async_nf_unregister+0x5c/0x14c
mxc_isi_remove+0x124/0x2a0 [imx8_isi]
Allocated by task 249:
__kmalloc_noprof+0x27c/0x690
mxc_isi_crossbar_init+0x22c/0x560 [imx8_isi]
Freed by task 724:
kfree+0x1e4/0x5b0
mxc_isi_crossbar_cleanup+0x34/0x80 [imx8_isi]
mxc_isi_remove+0x11c/0x2a0 [imx8_isi]
The problem is that mxc_isi_remove() calls mxc_isi_crossbar_cleanup()
before mxc_isi_v4l2_cleanup(). The crossbar cleanup frees the media
entity pads, but the subsequent v4l2 cleanup still tries to remove
media links that reference those pads.
Fix this by calling mxc_isi_v4l2_cleanup() before
mxc_isi_crossbar_cleanup() to ensure all media entities are properly
unregistered while the pads are still valid. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: swap_cgroup: fix NULL deref in lookup_swap_cgroup_id on swapless host
lookup_swap_cgroup_id() passes swap_cgroup_ctrl[type].map to
__swap_cgroup_id_lookup() without checking that the type was ever
registered via swap_cgroup_swapon(). On a swapless host every ctrl->map
is NULL, so __swap_cgroup_id_lookup() dereferences NULL + a scaled
swp_offset().
Since commit bea67dcc5eea ("mm: attempt to batch free swap entries for
zap_pte_range()"), zap_pte_range() -> swap_pte_batch() calls
lookup_swap_cgroup_id() on any non-present, non-none PTE that decodes as a
real swap entry, without first validating it against swap_info[]. A
single PTE corrupted into a type-0 swap entry takes the host down at
process exit.
We hit this in production on a swapless 6.12.58 host: ~1s of
"get_swap_device: Bad swap file entry 3f800204222bb" (do_swap_page() being
correctly defensive about the same entry) followed by
BUG: unable to handle page fault for address: 000003f800204220
RIP: 0010:lookup_swap_cgroup_id+0x2b/0x60
Call Trace:
swap_pte_batch+0xbf/0x230
zap_pte_range+0x4c8/0x780
unmap_page_range+0x190/0x3e0
exit_mmap+0xd9/0x3c0
do_exit+0x20c/0x4b0
syzbot has reported the identical stack.
The source of the PTE corruption is a separate bug; this change makes the
teardown path as robust as the fault path already is. Every other caller
of lookup_swap_cgroup_id() is downstream of a get_swap_device() that has
already validated the entry, so the new branch is cold. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: avoid NULL deref of conn in iso_conn_big_sync()
iso_conn_big_sync() drops the socket lock to call hci_get_route() and
then re-acquires it, but dereferences iso_pi(sk)->conn->hcon afterwards
without re-checking that conn is still valid.
While the lock is dropped, the connection can be torn down under the
same socket lock: iso_disconn_cfm() -> iso_conn_del() -> iso_chan_del()
sets iso_pi(sk)->conn to NULL (and the broadcast teardown path can also
clear conn->hcon on its own). When iso_conn_big_sync() re-acquires the
lock and reads conn->hcon, conn may be NULL, causing a NULL pointer
dereference (hcon is the first member of struct iso_conn).
This path is reached from iso_sock_recvmsg() for a PA-sync broadcast
sink socket (BT_SK_DEFER_SETUP | BT_SK_PA_SYNC), so the dropped-lock
window can race with connection teardown driven by controller events.
Re-validate iso_pi(sk)->conn and its hcon after re-acquiring the socket
lock and bail out if the connection went away, as already done in the
sibling iso_sock_rebind_bc(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix next buffer leak in receive_encrypted_standard()
receive_encrypted_standard() allocates next_buffer before checking
whether the number of compound PDUs already reached MAX_COMPOUND. If
the limit check fails, the function returns immediately and the newly
allocated next_buffer is not assigned to server->smallbuf/server->bigbuf,
making it leaked.
Move the MAX_COMPOUND check before allocating next_buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
proc: protect ptrace_may_access() with exec_update_lock (part 1)
Fix the easy cases where procfs currently calls ptrace_may_access() without
exec_update_lock protection, where the fix is to simply add the extra lock
or use mm_access():
- do_task_stat(): grab exec_update_lock
- proc_pid_wchan(): grab exec_update_lock
- proc_map_files_lookup(): use mm_access() instead of get_task_mm()
- proc_map_files_readdir(): use mm_access() instead of get_task_mm()
- proc_ns_get_link(): grab exec_update_lock
- proc_ns_readlink(): grab exec_update_lock |
| In the Linux kernel, the following vulnerability has been resolved:
hfs/hfsplus: zero-initialize buffer in hfs_bnode_read
hfs_bnode_read() can return early without writing to the output buffer
when is_bnode_offset_valid() fails or when check_and_correct_requested_
length() corrects the length to zero. Callers such as hfs_bnode_read_
u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the
result unconditionally, leading to KMSAN uninit-value reports.
Rather than initializing at each individual call site, zero the buffer
at the start of hfs_bnode_read() before any validation checks. This
ensures all callers in both hfs and hfsplus get a deterministic zero
value regardless of which early-return path is taken. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: free iso schedules on failed submit
EHCI and FOTG210 isochronous submits build an ehci_iso_sched before
linking the URB to the endpoint queue, and keep the staged schedule in
urb->hcpriv until iso_stream_schedule() and the link helpers consume it.
If the controller is no longer accessible, or usb_hcd_link_urb_to_ep()
fails, submit jumps to done_not_linked before that handoff happens and
leaks the staged schedule still attached to urb->hcpriv.
Free the staged schedule from done_not_linked when submit fails before
the URB is linked and clear urb->hcpriv after the free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
EHCI host controller with a USB isochronous device to test with, no
runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: legousbtower: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is
non-atomic")
[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most
other sleeping locks, can still use the lock object
after it's unlocked") |
| In the Linux kernel, the following vulnerability has been resolved:
usb: mtu3: unmap request DMA on queue failure
mtu3_gadget_queue() maps the request before checking whether
the QMU GPD ring can accept another transfer. the request is
returned with -EAGAIN before it is linked on the endpoint
request list if mtu3_prepare_transfer() fails.
Normal completion and dequeue paths unmap requests from
mtu3_req_complete(), but this error path never reaches that
helper, so the DMA mapping is left active. Unmap the request
before returning from the failed queue path. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: ulpi: fix memory leak on registration failure
The allocated device name is never freed on early ULPI device
registration failures.
Fix this by initialising the device structure earlier and releasing the
initial reference whenever registration fails. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove
The threaded IRQ handler ccg_irq_handler() calls ucsi_notify_common(),
which on a connector-change event calls ucsi_connector_change() and
schedules connector work. In ucsi_ccg_remove(), ucsi_destroy() frees
uc->ucsi (kfree) before free_irq() is called, so a handler invocation
already in flight may access the freed object after ucsi_destroy().
CPU 0 (remove) | CPU 1 (threaded IRQ)
ucsi_destroy(uc->ucsi) | ccg_irq_handler()
kfree(ucsi) // FREE | ucsi_notify_common(uc->ucsi) // USE
Move free_irq() before ucsi_destroy() in the remove path. It is kept
after ucsi_unregister(): ucsi_unregister() cancels connector work whose
handler issues GET_CONNECTOR_STATUS through ucsi_send_command_common(),
which waits for a completion that is signalled from the IRQ handler, so
the IRQ must stay active until that work has been cancelled.
The probe error path already orders free_irq() before ucsi_destroy().
This bug was found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD)
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SEV firmware docs for SNP_VLEK_LOAD note:
> On SNP_SHUTDOWN, the VLEK is deleted.
That is, the initialization/shutdown wrapper here is pointless, because the
firmware immediately throws away the key anyway. Instead, refuse to do
anything if SNP has not been previously initialized.
This is an ABI break: before, this was a no-op and almost certainly a
mistake by userspace, and now it returns -ENODEV. ABI compatibility could be
maintained here by simply returning 0 in the check instead. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: drbg - Fix returning success on failure in CTR_DRBG
drbg_ctr_generate() sometimes returns success when it fails, leaving the
output buffer uninitialized. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix freeing of PMD-sized vmemmap pages
Commit bf9e4e30f353 ("x86/mm: use pagetable_free()"), switched from
freeing non-boot page tables through __free_pages() to
pagetable_free().
However, the function is also called to free vmemmap pages.
Given that vmemmap pages are not page tables, already the page_ptdesc(page)
is wrong. But worse, pagetable_free() calls:
__free_pages(page, compound_order(page));
Since vmemmap pages are not compound pages (see vmemmap_alloc_block())
-- except for HVO, which doesn't apply here -- only first page of a
PMD-sized vmemmap page is freed, leaking the other ones.
Fix it by properly decoupling pagetable and vmemmap freeing.
free_pagetable() no longer has to mess with SECTION_INFO, as only the
vmemmap is marked like that in register_page_bootmem_memmap().
The indentation in remove_pmd_table() is messed up. Fix that while
touching it.
Bootmem info handling will soon be fixed up. For now, handle it
similar to free_pagetable(), just avoiding the ifdef.
[ dhansen: changelog munging. More imperative voice ] |
