| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the PostgreSQL message decoder reads the 4-byte message length field from the PostgreSQL wire protocol without any maximum validation. A malicious, compromised, or man-in-the-middle PostgreSQL server can send a message header with the length field set to an extremely large value (up to Integer.MAX_VALUE), causing the decoder to accumulate subsequent TCP data into a composite buffer without bound, leading to unbounded memory allocation on the client and an out-of-memory crash. This occurs before authentication completes.
The impacted component is io.vertx:vertx-pg-client. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the MySQL message decoder aggregates inbound multi-packet payloads into a composite direct-memory buffer without any cumulative size limit. A malicious, compromised, or man-in-the-middle MySQL server can send a continuous stream of packets with the maximum payload length (0xFFFFFF), preventing the end-of-message condition from being reached, causing unbounded direct-memory allocation on the client and leading to an out-of-memory crash. This occurs before authentication completes.
The impacted component is io.vertx:vertx-mysql-client. |
| StreamReadConstraints.maxNameLength (default 50,000 characters) is intended to bound how much memory a single JSON Object property name can consume while being parsed, independently of the much larger maxStringLength (default 100,000,000 characters) that bounds ordinary string values. For parsers built over character input — Reader, String or char[] sources, all served by ReaderBasedJsonParser — that bound is not applied while the name is being accumulated. The code path instead re-uses the string-value length check, which is roughly 2000x larger by default.
In the character-input slow path, ReaderBasedJsonParser._parseName2() accumulates the name into the TextBuffer and, when a segment fills, calls TextBuffer.finishCurrentSegment(), which validates only maxStringLength. The correct check, StreamReadConstraints.validateNameLength(int), is reached afterwards in CharsToNameCanonicalizer.findSymbol(), once the entire name has been scanned to its closing quote. By that point the full name — up to maxStringLength characters — has already been buffered in memory.
A remote attacker who can have a single sufficiently long JSON Object property name parsed through this path can force allocation on the order of 100,000,000 characters (approximately 200 MB, with segment bookkeeping pushing real peak usage higher) before any StreamConstraintsException is thrown, instead of the approximately 50,000-character (about 100 KB) bound the API promises. Repeating this across concurrent requests can exhaust the heap and crash the process. No authentication or user interaction is required. Because StreamReadConstraints.maxDocumentLength is disabled by default (-1), nothing else bounds the token first, so the issue is exploitable under default configuration.
Byte-input parsers are not affected: UTF8StreamJsonParser, UTF8DataInputJsonParser and the non-blocking (async) parsers re-validate maxNameLength on every growth of the name-decode buffer via ParserBase._growNameDecodeBuffer(), rejecting an oversized name after allocating only tens of kilobytes. Applications are exposed when untrusted JSON is parsed from a String, Reader or char[] — for example an HTTP request body already read into a String — rather than from raw UTF-8 bytes.
This issue affects com.fasterxml.jackson.core:jackson-core from 2.16.0 and tools.jackson.core:jackson-core from 3.0.0. Releases before 2.16.0 are not affected, because StreamReadConstraints.maxNameLength was first introduced in jackson-core 2.16.0. |
| Text::CSV_XS versions before 1.65 for Perl leak the parsed fields of a record that fails to parse in getline.
getline collects the fields of a record into a new array and returns a reference to it only when the parse succeeds. When the record has a syntax error, getline returns undef and never frees the array or the fields parsed before the error.
A long-running process parsing untrusted CSV retains every malformed record it is sent, so repeated malformed input exhausts its memory. |
| In MariaDB server version through 11.8.5, when server audit plugin is enabled with server_audit_events variable configured with QUERY_DCL, QUERY_DDL, or QUERY_DML filtering, if an authenticated database user invokes a SQL statement prefixed with double-hyphen (—) or hash (#) style comments, the statement is not logged. |
| Allocation of resources without limits in the parsing components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to cause a denial of service by delivering crafted input that triggers excessive resource consumption during the driver's parsing operations.
To remediate this issue, users should upgrade to version 2.1.0.0. |
| Improper neutralization of special elements in the authentication components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to execute arbitrary code or redirect authentication flows by using specially crafted connection parameters that are processed by the driver during user-initiated authentication.
To remediate this issue, users should upgrade to version 2.1.0.0. |
| A weakness has been identified in DrayTek Vigor2960 1.5.1.6 Revision 8218. The impacted element is the function rename_table of the file /cgi-bin/mainfunction.cgi of the component Rename Table Handler. This manipulation of the argument newtable causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 1.5.1.7 is sufficient to resolve this issue. It is suggested to upgrade the affected component. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer. |
| A security vulnerability has been detected in JumpServer up to 4.10.19. The affected element is an unknown function of the component Template Rendering. The manipulation of the argument IP/HOST leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. Upgrading to version 5.0.0 is sufficient to fix this issue. The identifier of the patch is fcf2904cdb884230e9676f50f37a44d09fa97040. The affected component should be upgraded. The vendor confirms: "This issue was identified quite some time ago, and we have already fixed it in the v5 branch. (...) The fix will also be included in an upcoming v4 release. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. From 2.0.0 until 3.14.4, multipart request processing can retain an unbounded number of open file descriptors. An unauthenticated attacker can consequently exhaust file descriptors with specially crafted multipart requests when a handler uses Request.post(). This issue is fixed in version 3.14.4. |
| A malicious, compromised, or MITM-controlled Exchange server can return a single well-formed SOAP response containing an element with enough attributes to keep Thunderbird's main thread CPU-bound for seconds to hours. This vulnerability was fixed in Thunderbird 158 and Thunderbird 153.5. |
| A security vulnerability has been detected in DrayTek Vigor2960 1.5.1.6 Revision 8218. This affects the function ruequest_certificate of the file /cgi-bin/mainfunction.cgi of the component IPsec Handler. Such manipulation of the argument option leads to command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 1.5.1.7 mitigates this issue. Upgrading the affected component is recommended. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer. |
| Grav API plugin (grav-plugin-api) 1.0.40 before 1.0.42 caches a full translation dictionary for every well-formed language code sent to the unauthenticated GET /api/v1/translations/{lang} endpoint, and 1.0.16 before 1.0.42 fails to check target and destination page rules in the sync and batch copy endpoints. Unauthenticated attackers can send small requests that each store about 560 KB to exhaust disk or APCu, while accounts with api.pages.write can overwrite translations or create pages that page-level rules deny. |
| IBM Storage TS4500 Library 1.1.1.6 through 1.12.0.3 IBM Diamondback Tape Library and IBM Storage TS4500 Library could allow an authenticated user to cause a denial of service using specially crafted SMTP requests that would consume excessive amounts of system resources. |
| A security flaw has been discovered in mcollina mcp-ripgrep up to 0.4.0. Affected is an unknown function of the file src/index.ts of the component Advanced Search Tool. The manipulation of the argument fileType results in os command injection. The attack requires a local approach. The exploit has been released to the public and may be used for attacks. The real existence of this vulnerability is still doubted at the moment. The code's own escapeShellArg on sibling arguments (skipped only for fileType) indicates that this is a CWE-78 oversight, not a documented design. The project maintainer cites the documentation: "This MCP server executes shell commands using the ripgrep tool. While efforts have been made to safely escape arguments, use caution when providing input, as it runs commands on your machine." |
| A flaw was found in Undertow. A remote attacker could exploit this vulnerability by sending specially crafted WebSocket messages with permessage-deflate negotiated. This could lead to excessive memory consumption due to the PerMessageDeflateFunction.largerBuffer() method using exponential doubling, resulting in a Denial of Service (DoS) for the affected application. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15, 4.0.20, 4.1.11, and 4.2.6, the stream protocol stored the FrameMax value negotiated during the Tune handshake but did not compare it with an inbound frame's declared length before buffering the frame. With the stream plugin enabled, a remote client could therefore cause excessive memory pressure and denial of service by declaring an oversized frame. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15, 4.0.20, 4.1.11, and 4.2.6, the Web STOMP WebSocket handler enforced neither max_frame_size nor login_timeout before authentication, allowing an unauthenticated client to keep a connection alive with a slow stream of small frames and accumulate unbounded pre-authentication state. The rabbitmq_web_stomp plugin must be enabled, and no authentication is required to reach the vulnerable path. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: clean up failed cached directory opens
open_cached_dir() sends CREATE and QUERY_INFO as a compound request. If
the CREATE succeeds but a later command returns an error, the function
must retain the CREATE FID so common cleanup can issue SMB2_close(). It
also must not treat a response error as a valid CREATE.
Validate the CREATE response before using its fields, record the FIDs, and
mark the handle open before handling errors from later compound commands.
Move the -EREMCHG reconnect handling before response validation so a
missing response does not hide the reconnect request. Count the handle
when it is marked open; confirmed close responses decrement the counter,
while existing close retry behavior remains best effort on transport
failures. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: fix memory leak of fence event on execbuffer failure
virtio_gpu_execbuffer_ioctl() reserves a DRM event with
drm_event_reserve_init() when VIRTGPU_EXECBUF_RING_IDX selects a ring that
userspace has enabled polling for. virtio_gpu_init_submit() does this
before the BO handles, the command buffer, the syncobj arrays and the
in-fence are processed, so every later error path runs with the event
already pending, including plain argument validation failures such as an
invalid bo_handle or an in-syncobj that carries no fence.
On those paths, virtio_gpu_cleanup_submit() drops the out-fence without
cancelling the event. The fence is freed without ever having been emitted,
taking the only driver-side pointer to the event with it. Closing the DRM
file does not help. drm_events_release() unlinks pending events but
deliberately leaves the freeing to the driver's later drm_send_event(),
which never runs for an orphaned event, so the allocation is leaked
permanently.
Found when fuzzing the virtio driver with Syzkaller:
BUG: memory leak
unreferenced object 0xffff88802c176e80 (size 96):
comm "syz.1.367", pid 10561, jiffies 4294960122
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
c8 6e 17 2c 80 88 ff ff 00 00 00 00 00 00 00 00 .n.,............
backtrace (crc e1973c6b):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4597 [inline]
slab_alloc_node mm/slub.c:4917 [inline]
__kmalloc_cache_noprof+0x49d/0x6f0 mm/slub.c:5485
_kmalloc_noprof include/linux/slab.h:988 [inline]
_kzalloc_noprof include/linux/slab.h:1309 [inline]
virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:282 [inline]
virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline]
virtio_gpu_execbuffer_ioctl+0xbbf/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505
drm_ioctl_kernel+0x1f4/0x3e0 drivers/gpu/drm/drm_ioctl.c:817
drm_ioctl+0x5f4/0xc70 drivers/gpu/drm/drm_ioctl.c:914
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix by cancelling and freeing the DRM event on the execbuffer error path
before dropping the fence. Clear the fence's event pointer after
cancellation so it does not retain a dangling pointer. |
