Search Results (26769 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99799 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: io_uring/sqpoll: don't wait for the thread to exit io_sq_thread_stop() wakes the SQPOLL thread and waits for it to exit. The thread belongs to the thread group that created the ring, so a SIGSTOP or the cgroup freezer holds it in get_signal(), and the wake up doesn't change that. io_ring_exit_work() then sleeps in that wait until someone continues or kills the process. iou_exit has 64 slots, so 64 closed SQPOLL rings of a stopped process keep every other ring from being freed, for everyone. Don't wait. Set the stop bit, wake the thread, and let it exit when it gets to run again. The sqd can now outlive its last ring, so give it a second refcount with one reference for the rings and one for the thread, and free it with the last one. The thread can't reach a freed ring, rings leave ctx_list before dropping their reference, and the io-wq hash is refcounted.
CVE-2026-99800 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.8 High
In the Linux kernel, the following vulnerability has been resolved: io_uring: free the task context after a grace period A task other than the owner can free a request, io_ring_exit_work() running the local task_work of a DEFER_TASKRUN ring for example, or io_do_iopoll() reaping completions. io_put_task() then takes the else branch: percpu_counter_sub(&tctx->inflight, 1); if (unlikely(atomic_read(&tctx->in_cancel))) wake_up(&tctx->wait); put_task_struct(tctx->task); The first line is what lets the owner leave io_uring_cancel_generic(), and on exec it frees the tctx right after. Nothing holds that off for the remaining three lines, the task reference only covers a tctx freed along with the task_struct. It used to work out because io_uring_del_tctx_node() took the uring_lock that the freeing side holds across io_put_task(), until that moved to tctx_lock. Free the tctx with kfree_rcu(), and enter an RCU read section in io_put_task() before the count is dropped.
CVE-2026-99404 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: xfs: check fork type against dabtree block magic number LOLLM complains that we fail to flag dabtree blocks that should never be associated with the file fork -- data forks can't point to xattr leaves, and attr forks can't point to dirent blocks. Add the missing checks.
CVE-2026-99778 1 Linux 2 Linux, Linux Kernel 2026-11-20 3.3 Low
In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: fix out_req buffer leak in disable_usb9pfs usb9pfs->out_req is allocated with alloc_ep_req(), which also allocates the request's data buffer (req->buf). disable_usb9pfs() frees it with plain usb_ep_free_request(), which only frees the usb_request structure itself and leaks req->buf on every close. Use free_ep_req() instead, matching the allocator, as documented by its own comment ("Requests allocated via alloc_ep_req() *must* be freed by free_ep_req()").
CVE-2026-99784 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.0 Medium
In the Linux kernel, the following vulnerability has been resolved: 9p/xen: fix refcount leak in p9_xen_response() on wrong tag p9_xen_response() looks up the request for an incoming reply with p9_tag_lookup(), which takes a reference on the returned p9_req_t. When the tag does not resolve to a request in REQ_STATUS_SENT, the function warns and continues the loop without dropping that reference, permanently leaking the p9_req_t and its msize buffers. The reply header, including the tag, is supplied by the backend, so a malicious or buggy 9P backend can leak kernel memory on every crafted response. Drop the reference before continuing.
CVE-2026-99789 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: block: restore the iterator when rejecting a misaligned bio bio_iov_iter_get_pages() can extract some iovecs before encountering a misaligned one. It releases the pages and rejects the entire bio, but leaves the supplied iterator advanced. An iomap direct-I/O caller may subsequently reexpand the iterator's byte count and fall back to buffered I/O. The reexpanded count then includes bytes before the iterator's current segment, potentially causing iterate_iovec() to read beyond the imported iovec array. In a reproducer using an initial empty iovec followed by 10-byte and 1015-byte segments, writev() returned 1015 instead of 1025 and KASAN reported an 8-byte read beyond the nine-element iovec allocation. Saving and restoring the iterator on the rejected-bio path makes writev() return 1025 and eliminates the KASAN report. Restore the entire iterator rather than reverting a byte count: advancing past an empty segment changes its position without consuming any bytes. Leave successful and partially accepted bio paths unchanged.
CVE-2026-99792 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: smb/server: prevent file publication after tree disconnect TREE_DISCONNECT closes the tree's published file handles before marking and removing the tree connection. A concurrent CREATE that already holds a tree reference can therefore publish its file after the close pass. When CREATE drops its reference, the tree can be freed while the published file still points to it. Mark and remove the tree connection before closing its files, and serialize both new-open and durable-reconnect volatile ID publication with that state transition. An opener is then either published in time for the close pass or rejected after disconnect with STATUS_NETWORK_NAME_DELETED. Keep a tree reference while a file carries its tree pointer. This protects asynchronous users that can defer the file's final destruction past tree disconnect. The close pass can race the successful FP_NEW to FP_INITED transition. Take the opening request's file reference atomically with that transition. This keeps the file alive until request completion even if teardown removes the ID immediately. BUG: KASAN: slab-use-after-free in proc_show_files (fs/smb/server/vfs_cache.c:126) Read of size 4 at addr ff11000101540f80 by task poc/153 Call Trace: proc_show_files (fs/smb/server/vfs_cache.c:126) seq_read_iter (fs/seq_file.c:231) proc_reg_read_iter (fs/proc/inode.c:299) vfs_read (fs/read_write.c:574) ksys_read (fs/read_write.c:716) do_syscall_64 (arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Allocated by: ksmbd_tree_conn_connect (fs/smb/server/mgmt/tree_connect.c:35) smb2_tree_connect (fs/smb/server/smb2pdu.c:2819) handle_ksmbd_work (fs/smb/server/server.c:368) Freed by: kfree (mm/slub.c:6801) handle_ksmbd_work (fs/smb/server/server.c:332)
CVE-2026-99794 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.3 Medium
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Reject signalling responses in invalid states A peer can send configuration messages while an incoming channel is in BT_CONNECT2, before the security or deferred accept gate has completed. A configuration response can then promote the channel to BT_CONNECTED. Configuration responses can also act on channels that are closing, and a late connection response can move a disconnecting channel back to BT_CONFIG. Accept connection responses only while waiting in BT_CONNECT. Answer configuration requests in BT_CONNECT2, but defer our own request until BT_CONFIG so configuration cannot complete before the gate. Ignore configuration responses outside BT_CONFIG and BT_CONNECTED, and only complete configuration in BT_CONFIG.
CVE-2026-99795 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: cxl/features: Ensure that count is set before access to ent[] __counted_by() get_supported_features() assigns entries->num_features only after the memcpy() loop that fills entries->ent[] has already run. Since ent[] is __counted_by(num_features), the compiler's bounds instrumentation sees a 0-length array during that loop and FORTIFY_SOURCE trips on the memcpy. Set @num_features right after allocation, before any write into ent[], so the bound is correct for the whole lifetime of the array. This was found via a fortify panic: memcpy: detected buffer overflow: 384 byte write of buffer size 0 WARNING: lib/string_helpers.c:1035 at __fortify_report+0x54/0xa0 kernel BUG at lib/string_helpers.c:1043! Call trace: __fortify_panic+0x10/0x18 get_supported_features.isra.0+0x4a0/0x4d0 [cxl_core] devm_cxl_setup_features+0x84/0x120 [cxl_core] cxl_pci_probe+0x254/0x5e0 [cxl_pci] Same class of bug, same fix shape as commit 6c9d2e87df40 ("cxl/fwctl: Fix __fortify_panic"), which fixed the analogous issue in cxlctl_get_supported_features() but missed this one. [ dj: Fixed up title typo per Jonathan. ]
CVE-2026-99796 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: cancel all matching requests in one pass With IORING_ASYNC_CANCEL_ALL, __io_async_cancel() calls io_try_cancel() until nothing is found, and io_poll_cancel() cancels one request per call, starting each lookup at the beginning of the hash. A cancelled request stays hashed until its task work runs, so every lookup walks past the ones already cancelled. Cancelling K of N pending polls visits about K*N/2 requests in one io_uring_enter(), with uring_lock held. A single CANCEL_FD|ALL on 80000 polls on one eventfd takes 17.06s, 0.02s with this change. With voluntary preemption the soft lockup watchdog fires: watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [repro:100] RIP: 0010:io_cancel_req_match+0x19/0xa0 io_poll_cancel+0x73/0x170 io_try_cancel+0x7b/0xf0 __io_async_cancel+0x41/0x110 Walk the hash once and cancel every match, as io_cancel_remove() does for futex and waitid. Cancel by user_data only needs its own bucket. __io_async_cancel() still loops until nothing is found, so a request that io-wq parks in the poll hash meanwhile is still cancelled. A cancel that matches one request now walks the whole hash twice instead of stopping at the match.
CVE-2026-99802 1 Linux 2 Linux, Linux Kernel 2026-11-20 3.3 Low
In the Linux kernel, the following vulnerability has been resolved: io_uring/register: enforce per-task restrictions in io_uring_register_blind() When io_uring_register(2) is invoked with fd == -1, it dispatches directly to io_uring_register_blind() without checking current->io_uring_restrict. As a result, a task with per-task register restrictions installed via IORING_REGISTER_RESTRICTIONS can still invoke blind registration opcodes such as IORING_REGISTER_SEND_MSG_RING even when those opcodes are not in the task's allowed register_op bitmap. Check current->io_uring_restrict->register_op in io_uring_register_blind() before dispatching blind registration opcodes.
CVE-2026-99803 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: io_uring/net: mask socket type with SOCK_TYPE_MASK in io_socket_bpf_populate() When an IORING_OP_SOCKET request is prepared in io_socket_prep(), sock->type retains creation flags such as SOCK_CLOEXEC and SOCK_NONBLOCK until __sys_socket_file() masks them off with SOCK_TYPE_MASK during execution. However, io_socket_bpf_populate() copies sock->type into bctx->socket.type without masking off ~SOCK_TYPE_MASK. As a result, a cBPF filter inspecting bctx->socket.type against socket types such as SOCK_DGRAM or SOCK_STREAM can be bypassed by ORing SOCK_CLOEXEC or SOCK_NONBLOCK into the socket type. Mask sock->type with SOCK_TYPE_MASK when populating bctx->socket.type.
CVE-2026-99408 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: xfs: don't proceed with xattr repair if the live update fails LOLLM observes that we ought to make one last check for failed live updates before replacing the xattr structure. Let's be cautious here.
CVE-2026-99780 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: always reset completion when disconnecting When some tx or rx transfers were pending while closing the connection, the completion handler could catch one pending completion call. To ensure a normal start when mounting again, we have to reset the completion and flush any pending completions.
CVE-2026-99783 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: Fix use-after-free in disable_usb9pfs() disable_usb9pfs() frees the IN and OUT usb_request objects before it disables the corresponding endpoints. If either request is still queued, the later usb_ep_disable() call cancels the endpoint queue and the UDC driver can still access the already freed request. With dummy_hcd and KASAN, this is reproducible by queueing the OUT request and then disconnecting the configfs gadget: BUG: KASAN: slab-use-after-free in dummy_disable+0x2b4/0x300 Read of size 8 at addr ffff888009702400 by task sh/1 usb_ep_disable+0x8e/0x1f0 usb9pfs_func_unbind+0x193/0x350 gadget_dev_desc_UDC_store+0x135/0x280 dummy_free_request() also warns because the request is freed while its queue entry is still linked. Disable both endpoints before freeing the request objects. This lets usb_ep_disable() cancel any queued transfers and invoke the completion callback while the request storage is still valid. The request objects are then freed only after they have been removed from the endpoint queues.
CVE-2026-99788 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Validate FFH register fields before hardware access The x86 CPPC FFH accessors construct masks and shift values using the firmware's Bit Width and Bit Offset without checking that the field fits in an MSR. A zero-width field or a field extending beyond bit 63 can therefore cause an invalid shift. The safe MSR accessors only handle an access fault, not invalid field arithmetic after a successful read. Also, the 64-bit GAS address is implicitly narrowed to the 32-bit MSR number. A descriptor with nonzero upper address bits can access a different MSR from the one described by firmware. The arm64 AMU counter readers have the same unchecked field arithmetic. Validate the field bounds before reading a counter, including both descriptors in the paired counter path. Dispatch FFH accesses before decoding the GAS Access Size in the common read and write paths. Otherwise, a large access_width can trigger an invalid shift in GET_BIT_WIDTH() before the architecture validates its register. That field has architecture-specific FFH semantics and is not needed by the generic memory/port accessor on this path. Validate x86 MSR addresses and share the field-bounds checks between related accessors within each architecture.
CVE-2026-99663 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix clearing folios in memfd_pin_folios() memfd_pin_folios() pins folios obtained directly from the page cache without checking whether they are uptodate. However, shmem fallocate() can leave newly allocated folios uncleared and not uptodate. Callers such as udmabuf can then expose uninitialized memory to userspace. Clear non-uptodate folios and mark them uptodate under the folio lock before returning them to the caller. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description and comment ]
CVE-2026-99755 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ptp: fix use-after-free in extts_fifo_show() reading tsevqs unlocked extts_fifo_show() walks ptp->tsevqs with list_count_nodes() and then list_first_entry() without holding ptp->tsevqs_lock, the spinlock that "protects tsevqs from concurrent access". Every other accessor of the list honours it: ptp_open() (list_add_tail), ptp_release() (list_del followed by kfree of the per-fd queue), ptp_clock_release() and ptp_clock_event() all take tsevqs_lock. extts_fifo_show() is the only one that does not. A per-fd timestamp queue is appended to tsevqs on open("/dev/ptpN") and removed and freed on close(), both under tsevqs_lock: scoped_guard(spinlock_irq, &ptp->tsevqs_lock) list_del(&queue->qlist); bitmap_free(queue->mask); kfree(queue); So a read of /sys/class/ptp/ptpN/fifo running concurrently with a close() of a /dev/ptpN fd can have list_count_nodes() walk into the queue that close() is removing and freeing, dereferencing freed memory (use-after-free) or a poisoned list pointer. Take tsevqs_lock around the list walk. The fifo only ever draws from the first queue, which is the registration-time queue created in ptp_clock_register() and freed only in ptp_clock_release(); that cannot run while the sysfs attribute is being read, so the dequeue from queue->buf under queue->lock may stay outside tsevqs_lock and the lock order is unchanged.
CVE-2026-99765 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.9 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix demo-mode dynamic ACL dev-entry UAF vs LUN teardown A demo-mode (generate_node_acls=1) login that allocates a dynamic NodeACL populates that ACL's per-LUN dev entries in core_tpg_add_node_to_devs() *before* the ACL is linked onto tpg->acl_node_list by target_add_node_acl(): core_tpg_check_initiator_node_acl(): ... core_tpg_add_node_to_devs(acl, tpg, NULL); /* builds deves */ target_add_node_acl(acl); /* only now listed */ The LUN teardown sweep, core_clear_lun_from_tpg(), enumerates only tpg->acl_node_list, so a dev entry whose ACL is still in the window above is invisible to the sweep and is never disabled. It is left on the se_lun->lun_deve_list after core_tpg_remove_lun() frees the se_lun; when the same unpacked_lun is later re-added and the se_lun is reallocated at the same address, the stale dev entry is rediscovered by target_nacl_find_deve() and core_enable_device_list_for_node() corrupts lun_deve_list: BUG: KASAN: slab-use-after-free ... core_enable_device_list_for_node+0x5ce/0x880 core_tpg_add_node_to_devs+0x169/0x190 core_dev_add_lun+0x146/0x190 target_fabric_port_link+0xe9/0x1b0 configfs_symlink+0x381/0xae0 __x64_sys_symlink+0x55/0x80 The demo-mode login path that drives the ACL/dev-entry creation is reachable by an unauthenticated initiator; the colliding LUN add/remove is a local configfs operation. Commit 49cb77e297dc ("target: Avoid mappedlun symlink creation during lun shutdown") introduced se_lun->lun_shutdown and guarded the *explicit* ACL MappedLUN path (target_fabric_mappedlun_link()), but the demo-mode automatic path, core_tpg_add_node_to_devs() -> core_enable_device_list_for_node(), was never given the equivalent guard, and the publish-after-populate ordering in core_tpg_check_initiator_node_acl() was left unchanged. Fix it in three cooperating parts: 1) Publish the dynamic NodeACL onto acl_node_list *before* creating its dev entries, so the teardown sweep can observe them. 2) Refuse to attach a dev entry to an se_lun that is shutting down, checked under nacl->lun_entry_mutex -- the same lock the sweep takes -- so once the sweep has passed an ACL any later enable for that LUN observes lun_shutdown and skips it. 3) In core_enable_device_list_for_node(), insert the new dev entry onto lun->lun_deve_list while still holding nacl->lun_entry_mutex, in both the replace and the new-entry branch. Previously the entry was added to nacl->lun_entry_hlist under the mutex but to lun->lun_deve_list only after dropping it; with the ACL now published early, the sweep could take the mutex in that gap, find the entry on the hlist, core_disable_device_list_for_node() it (list_del() on the not-yet- linked lun_link succeeds and the entry is freed), and then the enable would list_add_tail() the freed entry back onto lun_deve_list. Linking both lists under the mutex makes enable and the sweep mutually exclusive, closing that window. core_tpg_add_node_to_devs() already ignores the return value of core_enable_device_list_for_node(), so a shutting-down LUN is simply skipped.
CVE-2026-99766 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: aic79xx: Fix NULL pointer dereference in device reset Since commit c67e63800446 ("scsi: aic79xx: Do not reference SCSI command when resetting device") the device reset SCB has no SCSI command, but ahd_linux_dev_reset() still sets its residual, and ahd_abort_scbs(), which completes it, sets its status. Seen on an AIC-7902 when a failing disk triggered a device reset, which killed the SCSI error handler: BUG: kernel NULL pointer dereference, address: 0000009c EIP: ahd_linux_dev_reset.cold+0xee/0x26e Add NULL command checks to the accessors in aic79xx_osm.h. Also skip autosense for an SCB without a command and complete it with ahd_done() right away: the REQUEST SENSE path can clear SCB_DEVICE_RESET, after which ahd_done() would dereference the missing command.