| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| undici's retry handler can leave an already-exposed response body pending forever. When a server returns a successful response that declares a Content-Length, sends only part of the body, and closes the connection, the retry handler retries the request. If the retry returns a non-retryable status such as 400, the handler forwards that new response downstream and replaces its internal response stream, but the original response body that the application still holds is never ended or destroyed. As a result calls that read that body never settle, and the configured body timeout does not fire because its timer is tied to the connection parser rather than the orphaned body. An attacker-controlled server can trigger this with two short responses without keeping a connection open, and repeated requests accumulate pending promises and streams that can exhaust application concurrency or memory. This affects undici versions from 7.11.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2. |
| Tapo C100/C101 V5 contains a null pointer dereference vulnerability in the RTSP service. An attacker on the local network can send specially crafted requests that cause the service to dereference an invalid pointer, resulting in a service crash and device reboot. Successful exploitation can disrupt live video streaming functionality and cause a temporary denial-of-service condition. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: require every boolean value to be defined
p_bools.nprim comes from the policy image independently of how many
booleans follow it, and cond_index_bool() fills bool_val_to_struct[] at
value - 1, so a count larger than the values present leaves NULL entries.
Every user of that array then walks it by index and dereferences each
entry: cond_evaluate_expr() on the access-vector path,
security_get_bools() and security_get_bool_value() behind selinuxfs, and
security_set_bools(). A sparse class value is absorbed by
policydb_class_isvalid() and its siblings; booleans have no such
predicate, and no consumer that could use one.
Reject a boolean value that no boolean defines, once, where the array is
built. Conforming policies define every boolean they declare and are
unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: reject an unclaimed class value in security_get_classes()
security_get_classes() sizes an array by p_classes.nprim and fills it at
value - 1, so a class value the policy never defines leaves a NULL.
sel_make_classes() passes every entry to sel_make_dir(), reaching the same
d_alloc_name() dereference as the permission array. The class symbol table
is allowed to be sparse (policydb_class_isvalid() exists to absorb that),
but this getter builds its own array straight from the hash table and has
no such predicate.
Fail the lookup when a value went unclaimed instead of handing out the
NULL. Conforming policies define every class they declare and are
unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: sof-audio: Fix error path in sof_widget_setup_unlocked()
If either tplg_ops->dai_config or widget_kcontrol_setup fail during widget
setup we would double decrement the use_count of the widget because the
sof_widget_free_unlocked() would be called twice, similarly the core_put
would be invoked twice as well.
Since the use_count and core_put() is handled within the widget_free
function we need to return without falling through the pipe_widget_free
label.
The fixes tag is picked to the last change around this part of the code
which is adequately old enough for backporting purposes. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: lpass-wsa-macro: Fix enum kcontrol accesses
EAR SPKR PA Gain" and the four "WSA RX* Mux" controls are enumerated,
but their get and put callbacks access the value through
ucontrol->value.integer.value[0] (a long) instead of
ucontrol->value.enumerated.item[0] (an unsigned int).
This same pattern was fixed in the sibling drivers by
commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array
out of bounds for enum type") and
commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array
out of bounds for enum type"), but wsa-macro was missed.
On 64-bit kernels with CONFIG_SND_CTL_DEBUG this trips the elem value
sanity check and every read of these controls fails with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Reject UVD message with invalid number of h265 refs
Same change as for h264, avoids overflow later when calculating
min dpb size.
(cherry picked from commit a4b0720e4f1601f97f59a2be9c1b4b94fa6527d5) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Reject UVD message with dimensions above 4096
Fixes potential overflow in DPB size calculations.
(cherry picked from commit 05e1387d151f71569fbe122d2c89f9db0c21dc10) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix UVD dpb min size calculation for H264
This should use actual number of references from the decode
message, instead of maximum derived from level.
(cherry picked from commit 64b525edb7e7bdfcdc77883c5e413804e2396856) |
| In the Linux kernel, the following vulnerability has been resolved:
net: packet: fix wrong transport_header when sending VLAN-tagged frame
In packet_parse_headers(), when processing a VLAN-tagged frame,
skb_set_network_header() is called to advance network_header past the
VLAN tag to the inner protocol header. skb_probe_transport_header() is
then called with skb->protocol still set to the outer VLAN EtherType
(e.g. ETH_P_8021Q), while nhoff (derived from skb_network_offset())
already points past the VLAN tag to the inner protocol header.
In __skb_flow_dissect(), proto is initialized to ETH_P_8021Q and nhoff
points past the VLAN tag. When the dissector hits case ETH_P_8021Q, it
reads a struct vlan_hdr at nhoff via __skb_header_pointer(), but that
offset contains the inner protocol header (e.g. an IP header). The bytes
are misinterpreted as a VLAN header, yielding a garbage encapsulated
EtherType that matches no known protocol. The dissector returns false,
so skb_probe_transport_header() never calls skb_set_transport_header(),
leaving transport_header at its uninitialized sentinel value (~0U).
Move skb_probe_transport_header() to before skb_set_network_header(). At
the time skb_probe_transport_header() is called, network_header still
points to the VLAN header, so nhoff correctly points to the VLAN header.
The flow dissector can then parse the VLAN header, extract the inner
EtherType, and advance nhoff to the inner protocol header, allowing
transport_header to be set correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tap: fix wrong transport_header when sending VLAN-tagged frame
In tap_get_user_xdp(), when processing a VLAN-tagged frame (e.g.
ETH_P_8021Q), skb_set_network_header() is called first to advance
network_header past the VLAN tag to the inner protocol header.
skb_probe_transport_header() is then called with skb->protocol still
set to ETH_P_8021Q, while nhoff (derived from skb_network_offset())
already points past the VLAN tag to the inner protocol header.
In __skb_flow_dissect(), proto is initialized to ETH_P_8021Q and nhoff
points past the VLAN tag. When the dissector hits case ETH_P_8021Q, it
reads a struct vlan_hdr at the current nhoff via __skb_header_pointer(),
but that offset contains the inner protocol header (e.g. an IP header).
The bytes are misinterpreted as a VLAN header, yielding a garbage
encapsulated EtherType that matches no known protocol. The dissector
returns false, so skb_probe_transport_header() never calls
skb_set_transport_header(), leaving transport_header at its uninitialized
sentinel value (~0U).
Move skb_set_network_header() to after skb_probe_transport_header(). At
the time skb_probe_transport_header() is called, network_header still
points to the VLAN header (offset ETH_HLEN), so nhoff is correct and the
flow dissector can parse the VLAN header, extract the inner EtherType,
and advance nhoff to the inner protocol header, allowing transport_header
to be set correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
net/tls: Fail tls_sw_splice_read() after a failed async decrypt
When an async decrypt fails, tls_decrypt_done() records the error in
ctx->async_wait.err and calls tls_err_abort(), which stores it in
sk_err. tls_sw_recvmsg() and tls_sw_read_sock() each read
async_wait.err once they hold the reader lock and fail the call: a
record that did not authenticate breaks the connection.
tls_sw_splice_read() has no such check, and sk_err does not stand in
for one. tls_rx_rec_wait() tests sk_err only inside the loop it
skips whenever a record is already parsed, and the first reader to
reach sock_error() clears it, while async_wait.err persists. A
splice therefore keeps delivering records on a connection that
recvmsg() and read_sock() refuse to read.
Read async_wait.err in tls_sw_splice_read() as the other two readers
do. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Fix sync entry leak on OA config emit failure
xe_oa_emit_oa_config() releases the sync entries and the syncs array
only on its success path. When it fails before the point of no return
(fence allocation, config buffer allocation or batch submission), it
returns without touching stream->syncs.
The stream open path handles such failures in the caller, but
xe_oa_config_locked() propagates the error without any cleanup, so the
syncs array and the fence references held by the parsed entries are
leaked. The next config ioctl overwrites stream->syncs, making the
memory unreachable for good.
Clean up the parsed syncs when xe_oa_emit_oa_config() fails, matching
the cleanup done by the stream open error path.
(cherry picked from commit 8af97b3da2cfce04e6b457c6eb17ed3c1daf912b) |
| Parrot AR.Drone version 1 and 2 does not employ a suitable mechanism to prevent denial-of-service (DoS) attacks. An attacker can harm the device availability (i.e., video streaming and control) by using tool to perform an IPv4 flood attack. Verified attacks includes SYN flooding and UDP flooding. |
| A cross-site request forgery (CSRF) vulnerability exists in MISP due to form-security and CSRF protections being disabled based on whether an incoming request was identified as a REST request.
MISP's REST detection can be influenced by request properties such as the URL suffix or the HTTP Accept header. Because Accept: application/json can be supplied by a cross-origin page without requiring a CORS preflight, an attacker could cause a request originating from another website to be treated as REST traffic. MISP would consequently disable its normal form-security and CSRF validation even though the request was authenticated using the victim's existing browser session.
An unauthenticated remote attacker could exploit this behavior by convincing an authenticated MISP user to visit or interact with a malicious web page. The attacker's page could then issue crafted requests to susceptible state-changing MISP endpoints using the victim's privileges. Depending on the permissions of the victim and the targeted endpoint, this could allow unauthorized modification, creation, publication, or removal of data and other state changes.
The vulnerability originates from granting the form-security exemption based on _isRest() rather than on the authentication mechanism used by the request. The patch changes this behavior so that CSRF and form-security exemptions are granted only when the request actually carries a MISP API key. Session-authenticated REST-style requests remain subject to CSRF protection.
The fix also introduces support for transmitting CSRF tokens through the X-CSRF-Token header for legitimate same-origin AJAX requests. Such a header cannot normally be attached by a cross-origin page without triggering a CORS preflight, preventing it from being used to reproduce the original attack. |
| DreamMaker developed by Interinfo has a Reflected Cross-site Scripting vulnerability. Authenticated remote attackers can execute arbitrary JavaScript codes in user's browser via a malicious website. |
| ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer overflow in _output_dell_system_info_cmc_ipv6_info in ipmi-oem/ipmi-oem-dell.c (cmc-ipv6-info subcommand to dell get-system-info). |
| A flaw has been found in Eleveo Call Recording Software 9.7.0. This affects an unknown part of the file /callrec/roleAddAction.do. Executing a manipulation of the argument name/username can lead to cross site scripting. The attack may be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in code-projects Hospital Information System 1.0. Affected is the function viewReq of the file viewReq.php. Such manipulation of the argument ID leads to sql injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. |
