| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A system notification template on the Kiteworks appliance was rendered by a template engine that evaluated expressions contained in the stored template body. An authenticated System Administrator could potentially store a crafted template that executed operating-system commands on the appliance when the notification was next sent. |
| A stored cross-site scripting (XSS) weakness in Kiteworks Core could allow an administrator holding only a single, narrowly scoped delegated permission to store crafted content that later executes arbitrary JavaScript in the authenticated session of a System Administrator who views the affected page. This could have permitted the lower-privileged administrator to escalate to full administrative control of the tenant, including the creation of a new administrative account. |
| A privilege escalation vulnerability in Kiteworks could have allowed an attacker who had already obtained code execution on one node of a clustered Kiteworks deployment to run operating system commands with elevated privileges on another node of the same cluster. Insufficient input validation in an internal cluster management function let attacker-supplied values reach a privileged execution context; exploitation requires existing access to a node in the cluster, and the affected function is not reachable from outside the cluster. |
| MISP contains a vulnerability in its two-factor authentication (TOTP) verification process that permits a valid one-time code to be accepted more than once within its time-based validity window.
The issue exists in the user login flow where a TOTP code is verified as a second authentication factor. Because the system did not record whether a given TOTP period had already been consumed, the same code remained valid for its entire time window (typically 30 seconds). An attacker who captures a legitimate code during a user's login could replay it to authenticate a second session as that user.
Preconditions:
- The target user has TOTP-based two-factor authentication enabled.
- The attacker is in a position to observe or intercept the TOTP code during a legitimate login (e.g., network-level interception, shoulder surfing, or a compromised client).
- The replay must occur within the TOTP validity period.
Security impact:
- Unauthorized account access by replaying a captured one-time code.
- Potential compromise of threat-intelligence data and administrative functions accessible to the targeted user.
Affected versions: <v2.5.48. |
| In the Linux kernel, the following vulnerability has been resolved:
exit: hold a reference to thread_pid across proc_flush_pid
Commit 0a36bad01731 ("release_task: kill the no longer needed
get/put_pid(thread_pid)") removed the reference around proc_flush_pid().
It assumed that free_pids(post.pids) at the end of release_task() would
keep thread_pid alive until then.
That assumption is wrong. __change_pid() only records a detached PID in
post.pids when pid_has_task() is false for every PIDTYPE. If another task
still uses the exiting task's PID as its process group or session ID,
__unhash_process() removes the exiting task's PIDTYPE_PID link but leaves
the PID out of post.pids. release_task() therefore holds no reference to
it after dropping tasklist_lock.
The other task can then remove the remaining PIDTYPE links. Its
free_pids() call schedules delayed_put_pid(), and the RCU callback can free
the PID before the first release_task() reaches proc_flush_pid().
An unprivileged reproducer races wait4(-1) against setsid() to trigger this
ordering. Three of three fresh v7.2 KASAN boots reported:
BUG: KASAN: slab-use-after-free in
proc_invalidate_siblings_dcache+0x3e2/0x3f0
Read of size 8 by task h7_pid_reaper/1921
Call Trace:
proc_invalidate_siblings_dcache
release_task
wait_consider_task
__do_wait
do_wait
kernel_wait4
Freed by task 0:
kmem_cache_free
put_pid
delayed_put_pid
rcu_core
Last potentially related work creation:
__call_rcu_common
free_pids
ksys_setsid
KASAN identified a 144-byte object from the pid cache and located the bad
read 80 bytes into the freed object, matching pid->inodes. With an
explicit reference, three of three fresh boots completed without a KASAN
report. The concurrent RCU callback dropped its reference while
proc_flush_pid() was protected, and the balancing put_pid() performed the
final free afterward.
Take a reference before __unhash_process() clears p->thread_pid and release
it after proc_flush_pid() completes.
A tested source reproducer is available privately on request. No
controlled read or write, information leak, or privilege escalation is
claimed. The mainline patch applies directly to v6.19.y and newer;
v6.16.y through v6.18.y need a context-adjusted backport. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: initialize policy rwsem before sysfs publication
cpufreq_policy_alloc() initializes policy->rwsem after
kobject_init_and_add() has created the policy sysfs directory and its
default attributes. A sysfs access can therefore reach a policy callback
before the semaphore has been initialized.
Initialize policy->rwsem before publishing the policy kobject so sysfs
callbacks always see an initialized semaphore. |
| A stored cross-site scripting vulnerability via custom content descriptions exists in baserCMS. If this vulnerability is exploited, an arbitrary script may be executed in the user's web browser. |
| Tugtainer is a self-hosted app for automating updates of Docker containers. Prior to version 1.30.4, Tugtainer Agent allows unauthenticated access to Docker management APIs when AGENT_SECRET is not configured. The Agent uses request signatures to protect its API routes. However, in agent/auth.py, the signature verification function returns successfully if Config.AGENT_SECRET is empty. This causes protected Agent APIs to become accessible without authentication. This issue has been patched in version 1.30.4. |
| Tugtainer is a self-hosted app for automating updates of Docker containers. Prior to version 1.30.6, Tugtainer allows an authenticated user to make the backend server send outbound HTTP requests to arbitrary user-supplied URLs through the notification test endpoint. The /settings/test_notification endpoint accepts a urls field and passes it directly to Apprise without restricting protocols, hostnames, localhost addresses, private IP ranges, or cloud metadata addresses. This can be abused as an authenticated blind server-side request forgery (SSRF). This issue has been patched in version 1.30.6. |
| A path traversal vulnerability exists in the web management interface of multiple Multifunction Devices and Printers, including Apeos C4571 1.1.3 and earlier, Apeos C3567 1.1.3, or other products listed, specifically in the handling of externally supplied parameters.
If the device receives a specially crafted, malicious request, it may trigger unintended processing. |
| The Featured Image from URL (FIFU) WordPress plugin before 6.0.8, Featured Image from URL (FIFU) Premium WordPress plugin before 8.2.8 do not correctly enforce the REST API nonce, disabling the check for the whole request when a crafted URL is used, which could allow attackers to make a logged-in administrator perform any REST API action, such as creating a new administrator account, via a CSRF attack. |
| The Cache Enabler WordPress plugin before 1.8.17 does not validate a URL before using it to build a filesystem path in its cache purge routine, and does not confine the resulting deletion to the cache directory, allowing unauthenticated users to delete arbitrary files and directories on sites where another installed Cache Enabler WordPress plugin before 1.8.17 or passes a request-derived URL to its public cache-clearing hook. |
| The Paytm Payment Gateway WordPress plugin before 2.8.9 does not sanitize and escape data it stores from payment callbacks before outputting it in an admin page, and the integrity check on those callbacks can be forged when the gateway is enabled without credentials, allowing unauthenticated users to store scripts that will run in the session of a store administrator. |
| The Download Manager WordPress plugin before 3.3.71 does not sufficiently sanitise and escape a package setting before outputting it back in a page, which could allow users with the Author role and above to perform Stored Cross-Site Scripting attacks against any visitor who opens the package's download dialogue, including administrators. Only sites running PHP below 8.1 are affected, as the sanitisation applied when the setting is saved does not neutralise single quotes there. |
| The If-So Dynamic Content WordPress plugin before 1.10.2 does not sanitize a conversion name before storing it, nor escape it when rendering the analytics page, allowing users with editor-level access to store JavaScript that executes in the session of a higher-privileged user who views that page. |
| The Pro Like Button WordPress plugin before 2.0 does not properly sanitize and escape a parameter before using it in a SQL query, allowing unauthenticated users to perform SQL injection attacks. |
| The WP Fusion Lite WordPress plugin before 3.48.0 does not require authentication on a settings handler that runs during admin initialization, allowing unauthenticated users to overwrite the site's CRM integration endpoint and credentials, after which synced user data is delivered to an attacker-chosen host. |
| The Five Star Restaurant Reviews WordPress plugin before 2.3.14 does not properly escape a user-supplied value before outputting it into an HTML tag, allowing unauthenticated attackers to inject arbitrary web script that runs in the browser of anyone tricked into submitting a crafted request, including a logged-in administrator. |
| The Payments for Hubtel WordPress plugin before 1.0.2 does not verify that payment notifications received by its payment callback come from the payment provider, allowing unauthenticated attackers to mark arbitrary orders as paid without payment. |
| The Payments for Hubtel WordPress plugin before 1.0.2 does not prevent public access to a debug log in which it records payment requests, including the store's payment gateway API credentials in plain text, allowing unauthenticated attackers to obtain those credentials. |
