| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the CLI of Cisco Secure FTD Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root. To exploit this vulnerability, the attacker must have valid administrative credentials on an affected device.
This vulnerability is due to insufficient input validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input for a specific CLI command. A successful exploit could allow the attacker to execute commands on the underlying operating system as root. |
| Multiple vulnerabilities in the per-user-override feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should be denied to flow through an affected device. These vulnerabilities are due to a logic error that could occur when the affected software constructs and applies per-user-override rules. An attacker could exploit these vulnerabilities by connecting to a network through an affected device that has a vulnerable configuration. A successful exploit could allow the attacker to bypass the interface ACL and access resources that would should be protected. |
| A vulnerability in the Sourcefire tunnel control channel protocol in Cisco Firepower System Software running on Cisco Firepower Threat Defense (FTD) sensors could allow an authenticated, local attacker to execute specific CLI commands with root privileges on the Cisco Firepower Management Center (FMC), or through Cisco FMC on other Firepower sensors and devices that are controlled by the same Cisco FMC. To send the commands, the attacker must have root privileges for at least one affected sensor or the Cisco FMC. The vulnerability exists because the affected software performs insufficient checks for certain CLI commands, if the commands are executed via a Sourcefire tunnel connection. An attacker could exploit this vulnerability by authenticating with root privileges to a Firepower sensor or Cisco FMC, and then sending specific CLI commands to the Cisco FMC or through the Cisco FMC to another Firepower sensor via the Sourcefire tunnel connection. A successful exploit could allow the attacker to modify device configurations or delete files on the device that is running Cisco FMC Software or on any Firepower device that is managed by Cisco FMC. |
| A vulnerability in the SSL file policy implementation of Cisco Firepower Threat Defense (FTD) Software that occurs when the SSL/TLS connection is configured with a URL Category and the Snort 3 detection engine could allow an unauthenticated, remote attacker to cause the Snort 3 detection engine to unexpectedly restart. This vulnerability exists because a logic error occurs when a Snort 3 detection engine inspects an SSL/TLS connection that has either a URL Category configured on the SSL file policy or a URL Category configured on an access control policy with TLS server identity discovery enabled. Under specific, time-based constraints, an attacker could exploit this vulnerability by sending a crafted SSL/TLS connection through an affected device. A successful exploit could allow the attacker to trigger an unexpected reload of the Snort 3 detection engine, resulting in either a bypass or denial of service (DoS) condition, depending on device configuration. The Snort 3 detection engine will restart automatically. No manual intervention is required. |
| A vulnerability in the internal packet processing of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Firewalls could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of certain packets when they are sent to the inspection engine. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to deplete all 9,472 byte blocks on the device, resulting in traffic loss across the device or an unexpected reload of the device. If the device does not reload on its own, a manual reload of the device would be required to recover from this state. |
| A vulnerability in the remote access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of HTTPS requests. An attacker could exploit this vulnerability by sending crafted HTTPS requests to an affected system. A successful exploit could allow the attacker to cause resource exhaustion, resulting in a DoS condition. |
| A vulnerability in the IPv6 DHCP (DHCPv6) client module of Cisco Adaptive Security Appliance (ASA) Software, Cisco Firepower Threat Defense (FTD) Software, Cisco IOS Software, and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of DHCPv6 messages. An attacker could exploit this vulnerability by sending crafted DHCPv6 messages to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: To successfully exploit this vulnerability, the attacker would need to either control the DHCPv6 server or be in a man-in-the-middle position. |
| A vulnerability in ICMPv6 inspection when configured with the Snort 2 detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the CPU of an affected device to spike to 100 percent, which could stop all traffic processing and result in a denial of service (DoS) condition. FTD management traffic is not affected by this vulnerability. This vulnerability is due to improper error checking when parsing fields within the ICMPv6 header. An attacker could exploit this vulnerability by sending a crafted ICMPv6 packet through an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition. Note: To recover from the DoS condition, the Snort 2 Detection Engine or the Cisco FTD device may need to be restarted. |
| A vulnerability in the implementation of Security Assertion Markup Language (SAML) 2.0 single sign-on (SSO) for remote access VPN in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to intercept the SAML assertion of a user who is authenticating to a remote access VPN session. This vulnerability is due to insufficient validation of the login URL. An attacker could exploit this vulnerability by persuading a user to access a site that is under the control of the attacker, allowing the attacker to modify the login URL. A successful exploit could allow the attacker to intercept a successful SAML assertion and use that assertion to establish a remote access VPN session toward the affected device with the identity and permissions of the hijacked user, resulting in access to the protected network. |
| A vulnerability in ICMPv6 processing of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper processing of ICMPv6 messages. An attacker could exploit this vulnerability by sending crafted ICMPv6 messages to a targeted Cisco ASA or FTD system with IPv6 enabled. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| Multiple vulnerabilities in the payload inspection for Ethernet Industrial Protocol (ENIP) traffic for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured rules for ENIP traffic. These vulnerabilities are due to incomplete processing during deep packet inspection for ENIP packets. An attacker could exploit these vulnerabilities by sending a crafted ENIP packet to the targeted interface. A successful exploit could allow the attacker to bypass configured access control and intrusion policies that should be activated for the ENIP packet. |
| Multiple vulnerabilities in the Server Message Block Version 2 (SMB2) processor of the Snort detection engine on multiple Cisco products could allow an unauthenticated, remote attacker to bypass the configured policies or cause a denial of service (DoS) condition on an affected device.
These vulnerabilities are due to improper management of system resources when the Snort detection engine is processing SMB2 traffic. An attacker could exploit these vulnerabilities by sending a high rate of certain types of SMB2 packets through an affected device. A successful exploit could allow the attacker to trigger a reload of the Snort process, resulting in a DoS condition.
Note: When the snort preserve-connection option is enabled for the Snort detection engine, a successful exploit could also allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. The snort preserve-connection setting is enabled by default. See the Details ["#details"] section of this advisory for more information.
Note: Only products that have Snort 3 configured are affected. Products that are configured with Snort 2 are not affected. |
| A vulnerability in the hardware-based SSL/TLS cryptography functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Appliances could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to an implementation error within the cryptographic functions for SSL/TLS traffic processing when they are offloaded to the hardware. An attacker could exploit this vulnerability by sending a crafted stream of SSL/TLS traffic to an affected device. A successful exploit could allow the attacker to cause an unexpected error in the hardware-based cryptography engine, which could cause the device to reload. |
| A vulnerability in the multi-instance feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to escape the container for their Cisco FTD instance and execute commands with root privileges in the host namespace. The attacker must have valid credentials on the device.The vulnerability exists because a configuration file that is used at container startup has insufficient protections. An attacker could exploit this vulnerability by modifying a specific container configuration file on the underlying file system. A successful exploit could allow the attacker to execute commands with root privileges within the host namespace. This could allow the attacker to impact other running Cisco FTD instances or the host Cisco FXOS device. |
| A vulnerability in the SSL/TLS certificate handling of Snort 3 Detection Engine integration with Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the Snort 3 detection engine to restart. This vulnerability is due to a logic error that occurs when an SSL/TLS certificate that is under load is accessed when it is initiating an SSL connection. Under specific, time-based constraints, an attacker could exploit this vulnerability by sending a high rate of SSL/TLS connection requests to be inspected by the Snort 3 detection engine on an affected device. A successful exploit could allow the attacker to cause the Snort 3 detection engine to reload, resulting in either a bypass or a denial of service (DoS) condition, depending on device configuration. The Snort detection engine will restart automatically. No manual intervention is required. |
| A vulnerability in the SSL/TLS client of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper memory management when a device initiates SSL/TLS connections. An attacker could exploit this vulnerability by ensuring that the device will connect to an SSL/TLS server that is using specific encryption parameters. A successful exploit could allow the attacker to cause the affected device to unexpectedly reload, resulting in a DoS condition. |
| A vulnerability in the WebVPN service of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper management of authenticated sessions in the WebVPN portal. An attacker could exploit this vulnerability by authenticating with valid credentials and accessing a specific URL in the WebVPN portal. A successful exploit could allow the attacker to cause the device to reload, resulting in a temporary DoS condition. |
| A vulnerability in the authentication and authorization flows for VPN connections in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to establish a connection as a different user.
This vulnerability is due to a flaw in the authorization verifications during the VPN authentication flow. An attacker could exploit this vulnerability by sending a crafted packet during a VPN authentication. The attacker must have valid credentials to establish a VPN connection. A successful exploit could allow the attacker to establish a VPN connection with access privileges from a different user. |
| A vulnerability in the AnyConnect SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to an implementation error within the SSL/TLS session handling process that can prevent the release of a session handler under specific conditions. An attacker could exploit this vulnerability by sending crafted SSL/TLS traffic to an affected device, increasing the probability of session handler leaks. A successful exploit could allow the attacker to eventually deplete the available session handler pool, preventing new sessions from being established and causing a DoS condition. |
| A vulnerability in the secure boot implementation of Cisco Secure Firewalls 3100 Series that are running Cisco Adaptive Security Appliance (ASA) Software or Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated attacker with physical access to the device to bypass the secure boot functionality.
This vulnerability is due to a logic error in the boot process. An attacker could exploit this vulnerability by injecting malicious code into a specific memory location during the boot process of an affected device. A successful exploit could allow the attacker to execute persistent code at boot time and break the chain of trust. |
