| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| CM2507 IP cameras store configured wireless network credentials in cleartext within the device filesystem. An attacker who obtains filesystem access through physical access, a debugging interface, or another vulnerability could recover the configured network identifier and pre-shared key. |
| The OAKlouds developed by HGiga has a Insecure Deserialization vulnerability. Unauthenticated remote attackers can execute arbitrary code on the server by sending maliciously crafted serialized content. |
| vm2 (npm) versions 3.12.0 and earlier contain a sandbox escape in `VM` and `NodeVM`. When an embedder exposes a host API that returns a host-realm Promise, the bridge's rejection sanitizer (hostPromiseSanitizeReject / makeSanitizedPromiseCallback / normalizeHostPromiseCallbacks in lib/bridge.js) only wraps `then`/`catch` rejection slots that hold a function, and the sandbox-side `Symbol.species`/`.then` neutralization is installed only on the sandbox intrinsic `Promise.prototype`, so it never applies to a host Promise. Code running inside the sandbox can overwrite `p.constructor[Symbol.species]` on the host Promise and then call `p.then()` with no `onRejected` handler; V8 substitutes its internal Thrower, which re-throws the raw host rejection value into a resolve/reject closure captured by the attacker. This delivers an unsanitized, fully functional bridge proxy of the host object to sandboxed code, bypassing handleException and hostPromiseSanitizeReject. If the rejection value is host-pivotable (for example a host `process` object), this results in arbitrary code execution on the host. Fixed in 3.12.1. |
| Netis NX10 firmware V4.0.1.5808 and V3.0.0.4142 contain an information disclosure vulnerability that allows unauthenticated attackers to retrieve the administrator password by sending a request to the sysinfo action in the web management interface without a valid session. Attackers can replay the exposed credential against the login handler to establish a fully authenticated administrator session on the device. |
| vm2 versions 3.10.2 through 3.11.6 contain a sandbox escape vulnerability on Node.js 26 where Promise.prototype.finally() bypasses vm2's wrapper protections due to a stale PromiseThenLookupChain protector in V8 14.6. Attackers can exploit this by creating an async function that returns a Promise with an attacker-controlled constructor Symbol.species, allowing them to reach the host Function constructor and process object for arbitrary code execution. |
| vm2 versions 3.11.3 through 3.11.6 expose Node.js's host node:sqlite module to code running in NodeVM when that builtin is permitted, either explicitly or through builtin: ['*']. The module is wrapped with vm.readonly(), which prevents property assignment but leaves host-authority callables reachable; in addition, the resolver treats any request starting with 'node:' as a core-module request and the runtime strips only one 'node:' prefix, so a sandbox request for 'node:node:sqlite' resolves to the configured node:sqlite entry. Sandboxed code can therefore create an in-memory DatabaseSync with extension loading enabled and call DatabaseSync.loadExtension() on a native library bundled in the untrusted plugin package (path derived from __dirname). SQLite loads the library into the Node.js host process and invokes its native entry point, giving the sandboxed plugin arbitrary native code execution outside the sandbox with the host process's privileges. The issue is fixed in vm2 3.11.7. |
| A security flaw has been discovered in rcourtman Pulse up to 6.0.4/6.1.0-rc.4. Affected by this issue is the function fmt.Sprintf of the file /api/security/quick-setup of the component Quick Security Setup Handler. The manipulation of the argument Username results in improper input validation. The attack may be performed from remote. Upgrading the affected component is advised. |
| UVdesk Community Skeleton through 1.1.8 fails to authenticate or validate installation state on wizard endpoints in ConfigureHelpdesk controller actions. Unauthenticated attackers can repoint the database and create super administrator accounts by submitting crafted requests to wizard endpoints, gaining full control of the instance. |
| Feast through 0.66.0 fails to verify JWT token signatures before establishing user identity, allowing attackers to bypass all role-based access control by presenting an unverified token with a hardcoded claim value. Attackers can obtain trusted internal identity and gain unchecked read and write access to all entities, feature views, data sources, and permission policies on the server. |
| Authentication Bypass by Spoofing vulnerability in team-alembic ash_authentication allows an attacker who can plant a remember-me cookie in a victim's browser to replace that victim's authenticated session with one for the attacker's own account.
AshAuthentication.Plug.Helpers.sign_in_using_remember_me/3 skips re-authenticating an already-signed-in visitor by checking the session for "<subject_name>_token", but store_in_session/2 writes that key only when require_token_presence_for_authentication? is enabled and otherwise writes the bare subject name. At the default setting the guard therefore reads a key that is never written, its already-signed-in branch is unreachable, and the remember-me sign-in runs on every request through the per-request browser pipeline plug. A planted remember-me cookie is consequently honoured even for a visitor holding a live authenticated session, so whatever the victim enters afterwards lands in data the attacker controls. The read path in authenticate_resource_from_session/4 selects the key correctly, so the guard and the reader disagree about which key holds the session.
This issue affects ash_authentication: from 4.10.0 before 4.15.0 and from 5.0.0-rc.0 before 5.0.0-rc.14. |
| On affected EOS platforms with AAA-based gRPC authorization enabled for OpenConfig, gRPC requests of an authenticated user to OpenConfig may use the wrong privilege level, resulting in an authorization using the wrong AAA method list. This does not impact non-gRPC OpenConfig requests such as NETCONF. |
| An unauthenticated P4Runtime (Programming Protocol-Independent Packet Processors Runtime) client can achieve arbitrary code execution under certain conditions on affected platforms running Arista EOS configured with P4Runtime. P4Runtime is disabled by default in Arista EOS. By crafting a malicious packet during the initiation of a P4Runtime session, an attacker can obtain complete administrative control over the compromised switch.
This issue was discovered internally by Arista, and the company is not aware of any malicious exploitation of this vulnerability in customer networks. |
| Under certain circumstances on affected platforms running Arista EOS with gRPC Network Packet Sampling Interface (gNPSI) enabled, an unauthenticated gNPSI client can craft a malicious request to allow arbitrary code execution, granting an attacker full administrative control over the compromised switch. |
| A server-side request forgery (SSRF) vulnerability exists in the UnifiedLogin service of Altium Enterprise Server. An unauthenticated network attacker can cause the server to issue outbound HTTP requests to a destination of the attacker's choosing, including internal services that are reachable only from the server itself.
One such internal service exposes server configuration and credential material without authentication, relying only on the request originating locally. Because the forged requests originate from the server process, that check is satisfied. An unauthenticated attacker can therefore retrieve stored credentials and use them to obtain an administrative session, resulting in full compromise of the server and all of its services. Altium 365 cloud deployments are not affected, as the affected endpoint is disabled in cloud mode. |
| b2evolution CMS versions 6.7.8 through 7.2.5 contain an incomplete fix for CVE-2016-8901 where the serialized-array object check in param_check_serialized_array() fails to reject payloads with negative integer array keys. Unauthenticated attackers can submit crafted serialized PHP objects via POST requests to htsrv/call_plugin.php that bypass validation and reach unserialize(), instantiating arbitrary PHP objects with attacker-chosen properties that may enable code execution if suitable POP gadget chains exist. |
| vm2 versions from 3.11.0 before 3.11.8 fail to protect host TypedArray and ArrayBuffer prototypes from sandbox mutation. Attackers can use prototype-walking primitives to reach and modify host Uint8Array.prototype, %TypedArray%.prototype, and ArrayBuffer.prototype, causing host-created typed arrays to observe attacker-controlled properties after VM.run() returns. |
| vm2 versions >= 3.9.6 and <= 3.11.6 are affected by a NodeVM builtin allowlist bypass that permits a sandbox escape on Node.js 24 and newer when the embedder explicitly allows the node:test builtin (e.g. require: { builtin: ['node:test'] }). On Node.js 24+, module.builtinModules exposes the scheme-only key node:test, which is not covered by vm2's family-based DANGEROUS_BUILTINS protection, so it is stored in the generic host-passthrough loader. Because requireImpl() in lib/setup-node-sandbox.js strips a single 'node:' prefix before the builtin lookup, sandbox code calling require('node:node:test') resolves to the stored node:test key and receives a readonly proxy to the host module. Calls to node:test.run() are forwarded to the host implementation, which spawns a separate Node process for process-isolated test execution and passes through attacker-controlled execArgv values; supplying --eval=<JavaScript> therefore executes arbitrary JavaScript in an unrestricted host Node process outside the NodeVM sandbox. Fixed in vm2 3.11.7. |
| vm2 3.11.6 is vulnerable to a sandbox escape leading to remote code execution in the host Node.js process. The fix for GHSA-m283-3h24-438v is incomplete: the bridge gate at lib/bridge.js:1624 identity-checks only the direct call target when deciding whether to rebuild/sanitise a rejected host Promise value. Registering the rejection handler through Function.prototype.call or .apply indirection (e.g., p.then.call(p, undefined, cb)) makes the intercepted target host Function.prototype.call, so the sanitiser never runs and the raw host error reaches sandbox code with its own properties intact. If an embedder exposes a host-realm Promise to the sandbox (an async host function bridged via the sandbox option, or a NodeVM external module's async method) and that Promise rejects with an Error carrying a non-primitive own property referencing a host object (for example err.detail = process), untrusted code in the sandbox obtains a fully functional proxy to that host object and can execute arbitrary commands with the privileges of the host process (e.g., e.detail.mainModule.require('child_process').execSync(...)). The direct p.then(undefined, cb), bind, and Reflect.apply forms are correctly sanitised. Fixed in vm2 3.11.7. |
| Kubero through 3.1.1 fails to apply authentication guards to the notifications API endpoints, allowing unauthenticated attackers to read webhook secrets and service URLs. Attackers can retrieve stored credentials and register malicious webhooks to intercept pipeline events or suppress alerting by deleting existing configurations. |
| HP has identified potential security vulnerabilities in the HP Advance software that may enable elevation of privilege, remote code execution, or arbitrary file write under certain conditions, impacting the HP Advance server hosting the software. |
