| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Release the export reference when reaping open stateids
nfs4_put_stid() releases the svc_export tracked in
nfs4_stid.sc_export, but free_ol_stateid_reaplist() frees open and
lock stateids by calling ->sc_free() directly, bypassing that path.
An open stateid takes an sc_export reference in nfs4_open() and a
lock stateid takes its own in init_lock_stateid(); both reach
free_ol_stateid_reaplist() through their normal teardown, the open
stateid via release_open_stateid() and the lock stateid via
nfsd4_release_lockowner(), each through put_ol_stateid_locked().
The reference is therefore never dropped, pinning the export and
blocking unmount for the lifetime of the stateid.
Release sc_export in free_ol_stateid_reaplist() the way
nfs4_put_stid() does. ->sc_free() runs once per stateid, and a
stateid reaches free_ol_stateid_reaplist() or nfs4_put_stid() but
never both, so the reference is dropped exactly once. Revoked
stateids reach this path with sc_export already cleared by
drop_stid_export(), so they are skipped rather than double-freed.
nfs4_put_stid() itself read sc_export before acquiring cl_lock.
drop_stid_export() clears that field and releases the reference
under cl_lock, so a concurrent revocation could drop the export in
the window between the read and the final put, releasing the same
reference twice. Read sc_export while cl_lock is held so the two
paths serialize and the reference is released exactly once. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: release descriptor pools on probe failure
The per-NUMA-node descriptor DMA pools are created lazily from
nvme_init_hctx_common() once the admin tag set is allocated, but they are
only destroyed in nvme_remove() via nvme_release_descriptor_pools(). Any
probe failure after the admin tag set has been allocated unwinds through
the out_disable label and nvme_pci_free_ctrl(), neither of which releases
the pools, leaking the dma_pool objects.
Release the descriptor pools in the out_disable error path. It must not
be added to nvme_pci_free_ctrl(), as that would double-free against
nvme_remove() on the normal teardown path. |
| In the Linux kernel, the following vulnerability has been resolved:
amt: Don't support cross-netns setup.
When a lower device is unregistered, amt_device_event() tries
to unregister its upper AMT device, but it has two problems.
1. amt_lookup_upper_dev() looks up an upper device in the
lower device's netns only
2. amt_device_event() unregisters a single upper device only
If AMT device is created on a lower device in another netns,
removing the lower device triggers the splat below and gets
stuck until all upper devices are removed. [0]
The cross-netns setup seems unintentional considering 1. and
the following points:
* amt_link_setup() sets dev->netns_immutable to true
* skb_scrub_packet() is not called in the fast path
* iproute2 binary fails to find cross-netns lower device via
link-netns:
# ip -n ns1 link add amt0 link-netns ns2 type amt dev veth1
Cannot find device "veth1"
Instead of supporting it properly and preparing for per-netns
netdev unreg, let's forbid cross-netns setup.
Note that the problem 2. needs a separate fix.
[0]:
WARNING: net/core/dev.c:12518 at unregister_netdevice_many_notify+0x1cce/0x2250, CPU#48: ip/2031
Modules linked in:
CPU: 48 UID: 0 PID: 2031 Comm: ip Not tainted 7.2.0-rc5+ #27 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:unregister_netdevice_many_notify (net/core/dev.c:12518)
Code: 89 ef e8 d5 52 ae fe e9 d0 f4 ff ff 48 8d 3d f9 3b 9c 02 48 c7 c6 c0 0b 63 84 ba ab 1f 00 00 67 48 0f b9 3a e9 65 ff ff ff 90 <0f> 0b 90 eb 81 48 8d 3d f6 3b 9c 02 48 c7 c6 c0 0b 63 84 ba e2 1f
RSP: 0018:ffffc90004abf160 EFLAGS: 00010212
RAX: ffff888104d38260 RBX: ffff88800b0911b8 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff85b9f880
RBP: ffffc90004abf2d0 R08: ffffffff85b9f887 R09: 1ffffffff0b73f10
R10: dffffc0000000000 R11: fffffbfff0b73f11 R12: ffff88800b091d08
R13: ffff88800b091178 R14: dffffc0000000000 R15: ffff88800b091000
FS: 00007f555b86c600(0000) GS:ffff8881942a0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562107d489c0 CR3: 0000000109a40002 CR4: 0000000000372ef0
Call Trace:
<TASK>
rtnl_dellink (net/core/rtnetlink.c:3632 net/core/rtnetlink.c:3674)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7112)
netlink_rcv_skb (net/netlink/af_netlink.c:2556)
netlink_unicast (net/netlink/af_netlink.c:1319)
netlink_sendmsg (net/netlink/af_netlink.c:1900)
____sys_sendmsg (net/socket.c:775)
__sys_sendmsg (net/socket.c:2738)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
...
unregister_netdevice: waiting for veth0 to become free. Usage count = 7
ref_tracker: netdev@ffff88800d7496d8 has 3/3 users at
__netdev_adjacent_dev_insert (./include/linux/netdevice.h:4525 ./include/linux/netdevice.h:4554 net/core/dev.c:8791)
__netdev_upper_dev_link (net/core/dev.c:8879 net/core/dev.c:8963)
netdev_upper_dev_link (net/core/dev.c:9009)
amt_newlink (drivers/net/amt.c:3321) |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: avoid userspace overflow on invalid optlen
nfc_llcp_getsockopt() casts optval to (u32 __user *) for put_user(), so
the kernel always stores 4 bytes regardless of the caller-supplied
optlen. The existing min_t(u32, len, sizeof(u32)) only clamps the length
reported back to userspace; it does not constrain the store. A call with
optlen < 4 therefore writes past the user buffer, violating the
getsockopt(2) contract for all five supported optnames.
Reject any call with optlen < sizeof(u32) up front. 'len' is int, so a
plain size comparison would promote a negative optlen to size_t and slip
past the check; an explicit 'len < 0' test is added first to catch
negative values before the size compare. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: hold a reference to the request skb during send_frame
__pn533_send_async() publishes the command and then calls
dev->phy_ops->send_frame(). Once dev->cmd is set, an incoming frame
can be matched to this command: the I2C threaded IRQ runs
pn533_recv_frame(), which queues cmd_complete_work, and
pn533_send_async_complete() frees cmd->req with consume_skb().
On the I2C transport, pn533_i2c_send_frame() still dereferences the same
skb after i2c_master_send() returns, so a completion that races the
send can free the skb while the transport is still using it.
The request skb is owned by the command object and may be freed by
command completion at any time after dev->cmd is published, so the
transport send path must not assume it stays alive. Hold a temporary
reference to the request skb across the send_frame() call so the
transport always sees a live skb even if completion races the send.
Add a pn533_send_cmd_frame() helper and use it from all three send
paths. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix use of uninitialized memory in CORE_INIT_RSP parsing
nci_core_init_rsp_packet_v1() and nci_core_init_rsp_packet_v2() parse
the CORE_INIT_RSP packet without validating that the skb contains
enough data. A malformed response (e.g. injected via virtual_ncidev)
can declare a large num_supported_rf_interfaces while providing
insufficient data, causing reads of uninitialized slab memory. This
is later used in nci_init_complete_req(), triggering a KMSAN
uninit-value warning.
Add skb length checks before accessing packet fields:
- Validate the skb has at least 1 byte for the status field.
- Validate the skb can hold the fixed-size header before parsing.
- In v2, bounds-check each variable-length rf_interface entry and its
extension parameters within the parsing loop.
- In v1, verify the skb is large enough for both the variable-length
rf_interfaces array and the trailing rsp_2 structure. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Don't leak the extension cell pointer in the bounce payload
The bounce_error_event() embeds the failed event in the bounce payload
by pointing data.ext.ptr at it. When that event is a queued
variable-length event, its own data.ext.ptr holds the address of its
first extension cell, put there by snd_seq_event_dup(). The payload
goes out verbatim through snd_seq_expand_var_event(), so the address
reaches userspace.
That is the same address commit 705dd6dcbc0e ("ALSA: seq: Clear
variable event pointer on read") removed from the event header. The
read path still clears it there, just above the call that expands the
payload.
Embed a sanitised copy instead, treated exactly as snd_seq_read()
treats the header. A stack copy is enough because delivery is
synchronous and snd_seq_event_dup() copies before returning.
An unprivileged client reaches this by setting SNDRV_SEQ_FILTER_BOUNCE,
queueing a variable-length event to a port that does not exist and
reading the bounce back. Eight bytes on 64-bit, from its own pool. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: Free debugfs on registration failure
c4iw_alloc() creates the per-device debugfs tree (dev->debugfs_root via
setup_debugfs()), but it is removed only in c4iw_remove(), not in
c4iw_dealloc(). When RDMA device registration fails, the registration
worker's err_dealloc_ctx path calls c4iw_dealloc() directly, bypassing
c4iw_remove(), so the debugfs dentries leak and outlive the freed
c4iw_dev.
Move debugfs_remove_recursive() into c4iw_dealloc() so every path that
frees ctx->dev also removes its debugfs tree. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cma: Fix WARNING in res_to_rt
syzbot reported a WARN_ON(!res->dev) in res_to_rt() triggered via
addr_handler() during asynchronous address resolution:
"
WARNING: drivers/infiniband/core/restrack.c:138 at res_to_rt+0x1c4/0x230
CPU#1: kworker/u8:4/59
Modules linked in:
CPU: 1 UID: 0 PID: 59 Comm: kworker/u8:4 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Compute Engine, BIOS Google 07/24/2026
Workqueue: ib_addr process_one_req
RIP: 0010:res_to_rt+0x1c4/0x230 drivers/infiniband/core/restrack.c:138
RSP: 0018:ffffc9000201f850 EFLAGS: 00010293
RAX: ffffffff88d00ce5 RBX: ffff88807f0fd4f8 RCX: ffff88801e6e0000
RDX: 0000000000000000 RSI: ffffffff8fd996f0 RDI: 0000000000000003
RBP: 0000000000000000 R08: ffff88801e6e0000 R09: 000000000000000a
R10: 0000000000000009 R11: 0000000000000000 R12: dffffc0000000000
R13: 1ffff1100fe1fa9f R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff888125012000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00001d559c3d2000 CR3: 0000000077c4c000 CR4: 00000000003526f0
Call Trace:
<TASK>
rdma_restrack_add+0x5a/0x8a0 drivers/infiniband/core/restrack.c:236
addr_handler+0x41a/0x5a0 drivers/infiniband/core/cma.c:3534
process_one_req+0x2eb/0x540 drivers/infiniband/core/addr.c:624
process_one_work kernel/workqueue.c:3375 [inline]
process_scheduled_works+0xc4e/0x1630 kernel/workqueue.c:3458
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3539
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
"
In addr_handler(), cma_acquire_dev_by_src_ip() is called to populate
id_priv->cma_dev and bind the associated ib_device to id_priv->id.device.
If cma_acquire_dev_by_src_ip() returns an error (non-zero status), the ID
remains unassociated with any RDMA device.
Previously, rdma_restrack_add(&id_priv->res) was invoked unconditionally
even when cma_acquire_dev_by_src_ip() failed, passing a resource with a
NULL dev pointer and triggering the WARN_ON assertion in res_to_rt().
Fix this by only adding the resource to restrack when acquiring the device
succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: Fix rollback for explicit UBI device numbers
ubi_init_attach() rolls back module initialization failures by scanning
ubi_devices[0..i-1], where i is the mtd= parameter index. That assumes
the parameter index matches the UBI device number.
That assumption is not true when mtd= specifies an explicit ubi_num. A
successfully attached device can be stored at a higher ubi_devices[]
slot, and a later failure can miss it during rollback.
Scan the full ubi_devices[] array and detach by the actual array index,
matching the way UBI devices are stored. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: ubi: Release device reference on busy detach
ubi_detach_mtd_dev() obtains a device reference through ubi_get_device()
before checking whether the UBI device is busy. The busy return path drops
ubi->ref_count but leaves the device reference held, so the device object
cannot be released after a later detach.
Drop the device reference before returning -EBUSY. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: xilinx: formatter_pcm: fix stream_data leak on open error
In xlnx_formatter_pcm_open(), stream_data is allocated and
adata->play_stream or adata->capture_stream is assigned early. If a
later step, such as snd_pcm_hw_constraint_step() or
snd_pcm_hw_constraint_integer(), fails, the function returns the error
immediately. ALSA does not call the close callback when open fails, so
stream_data is leaked and the stream pointer is left dangling, pointing
to a substream that ALSA frees. A later interrupt would then call
snd_pcm_period_elapsed() on the freed substream.
Free stream_data and clear the stream pointer on the error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: core: fix memory leak in error path of build_tree()
In the error path of build_tree(), node instances can remain in the local
linked list when the function returns.
Whenever an invalid value is detected in the self ID sequence, each
allocated node instance is either an entry in the linked list or an
entry in the ports array of its parent node. Therefore, the allocate
node instances can be safely released by traversing the linked list from
its head.
Release the remaining node instances with for_each_fw_node() before
returning to the caller. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/efi: Avoid voluntary preemption with efi_mm installed
Gus reports a bad kernel memory access when using software PAN
(CONFIG_ARM64_SW_TTBR0_PAN=y) on a machine with support for EFI runtime
services:
Unable to handle kernel access to user memory outside uaccess routines
at virtual address 00000000f322ff30
Mem abort info:
ESR = 0x0000000096000004
FSC = 0x04: level 0 translation fault
Internal error: Oops: 0000000096000004 [#1] SMP
Workqueue: efi_rts_wq efi_call_rts
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : efi_call_rts+0xd8/0x288
Call trace:
efi_call_rts+0xd8/0x288 (P)
process_one_work+0x178/0x4f8
worker_thread+0x194/0x328
This is because the fpsimd context management code called from
__efi_fpsimd_begin() can preempt voluntarily, returning later to the EFI
code with an incorrect value for TTBR0_EL1 thanks to the deferred mm
switching used by the software PAN implementation.
Since EFI runtime services cannot preempt voluntarily and because the
fpsimd switching code does not rely on the TTBR0_EL1 mappings, simply
reorder the fpsimd switch so that it occurs before we change the
page-table. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, s390: Clear fetch destination on faulting arena atomic
Same missing register clear as on riscv64. A RMW atomic on an arena pointer
is converted to BPF_PROBE_ATOMIC and gets an exception table entry, but
bpf_jit_probe_atomic_pre() only fills in the arena base and the probe
offset, leaving probe->reg at the -1 that bpf_jit_probe_init() set, which
bpf_jit_probe_post() writes into the entry and ex_handler_bpf() then reads
back as "there is nothing to clear".
That is right for a plain BPF_{ADD,AND,OR,XOR}, which only writes memory,
but an RMW carrying BPF_FETCH also reads the old value into a register:
src_reg for BPF_{ADD,AND,OR,XOR} | BPF_FETCH and BPF_XCHG, and r0 for
BPF_CMPXCHG. So on a fault over an unmapped arena page the program resumes
at the landing pad with whatever that register held before the atomic
instead of the 0 that every other BPF_PROBE_* access delivers.
Fill probe->reg in from bpf_atomic_load_reg(). Unlike x86-64 and arm64,
s390x does not report arena violations from its exception handler, so there
is no access direction to correct here, only the missing register clear. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/debug: Fix deadlock during unregister
Unregistering an s390dbf debug area while one of the associated debugfs
files is being written to can cause a deadlock:
$ echo >.../vmur/level $ rmmod vmur
===================================================
debugfs write
debugfs_file_get()
debug_unregister()
mutex_lock(debug_mutex)
debugfs_remove()
wait for debugfs_file_put()
debug_file_ops.write()
debug_input()
mutex_lock(debug_mutex) ==> DEADLOCK
Fix this by splitting debug_unregister() into an s390dbf and debugfs
part, and running only the s390dbf part with debug_mutex locked. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/samsung_pwm: Switch to raw_spinlock_t type
Samsung PWM timer might be used as a clock source on some legacy systems.
When PREEMPT_RT is enabled on ARM, regular spinlock is converted to a
sleeping lock (mutex-based), which must not be used in atomic context
such as hard interrupt handlers. Switch the samsung_pwm_lock to the
raw_spinlock, which remains a true non-sleeping spinlock even
under PREEMPT_RT. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix max_qid race between configfs and controller allocation
The function nvmet_subsys_attr_qid_max_store() can race against
nvmet_alloc_ctrl() when a subsystem's max_qid limit is modified.
Suppose max_qid is currently 64. If nvmet_alloc_ctrl() executes:
ctrl->sqs = kzalloc_objs(struct nvmet_sq *, subsys->max_qid + 1);
and at this exact point, a userspace process changes max_qid to 128,
nvmet_subsys_attr_qid_max_store() will set the new max_qid value. It
attempts to delete active controllers to force a reconnect, but the
new controller won't be deleted because it hasn't been added to the
subsys->ctrls list yet.
nvmet_alloc_ctrl() then proceeds and adds the new controller to the
subsys->ctrls list. Later, when nvmet_install_queue() is called, it
will see max_qid set to 128, but the memory allocated for sqs is only
sized for 64 entries. This results in a KASAN out-of-bounds warning
and potential memory corruptions.
Fix this by protecting the queue allocations and list insertion in
nvmet_alloc_ctrl() with down_read(&nvmet_config_sem). Because
nvmet_subsys_attr_qid_max_store() acquires down_write(&nvmet_config_sem)
to modify the attribute, this safely prevents the configfs writer from
modifying max_qid during controller creation.
Copy the max_qid from the subsystem to the controller's structure
during the allocation; ctrl->max_qid never changes as long as the
controller remains in LIVE state, so this will prevent similar race
conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Avoid freeing unallocated PCIe SGL buffers
_base_release_memory_pools() unconditionally frees every
ioc->pcie_sg_lookup[] entry, including ones the setup loop never
allocated after a partial failure, causing a "bad dma" warning on debug
kernels or a NULL pointer dereference otherwise. |
