| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Exposure of sensitive information to an unauthorized actor in Windows Push Notifications allows an authorized attacker to disclose information locally. |
| Exposure of sensitive information to an unauthorized actor in Windows Shell allows an authorized attacker to disclose information over a network. |
| Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel Mail Component.
The camel-mail producer (MailProducer.getSender) scanned the outgoing Exchange for message headers in the mail.smtp. / mail.smtps. namespace and, when any were present, built a per-message JavaMail sender with those values applied as JavaMail session properties, overriding the endpoint configuration. This namespace is Camel-internal - only MailProducer interprets it - and was not blocked by any HeaderFilterStrategy, so the values could originate from any inbound protocol (for example platform-http query parameters or request headers, or JMS / Kafka messages from untrusted producers) that feeds a route ending in an smtp / smtps producer without an intervening removeHeaders. The maximal impact is version-dependent: on releases before 4.19.0, setting mail.smtp.host redirects the SMTP connection to a server under the attacker's control, and because the producer then authenticates with the endpoint's configured username and password those credentials are transmitted to the attacker; on 4.19.0 and later the producer connects to the endpoint's configured host explicitly, so the reachable impact is limited to weakening transport security (for example mail.smtp.ssl.trust, mail.smtp.starttls.enable or mail.smtp.socks.host) and interception of the outgoing message rather than host redirect. Exploitation requires a route that channels untrusted input into the mail producer without stripping the namespace.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the per-message override is disabled by default; enable it only on trusted endpoints with useJavaMailSessionPropertiesFromHeaders=true. For deployments that cannot upgrade immediately, strip the namespace before the mail producer with removeHeaders('mail.smtp.*') and removeHeaders('mail.smtps.*') between any untrusted ingress and the smtp / smtps producer. Even with the opt-in enabled, route authors should still strip the namespace on any path that carries untrusted input. |
| The Bulk Variables API in Apache Airflow called the redactor without passing the variable's key, so the key-based `should_hide_value_for_key` check (which triggers on secret-suffixed key names like `*_password` / `*_token` / `*_secret`) could not fire for JSON-decodable variable values. An authenticated UI/API user with bulk Variable read permission could retrieve plaintext values from JSON variables whose key would otherwise trigger redaction. Affects deployments that store sensitive values in JSON-typed Airflow Variables under secret-suffixed key names. Users are advised to upgrade to `apache-airflow` 3.3.0 or later (the fix landed on `main` after 3.2.2; no 3.2.x backport). |
| Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Vertx Websocket component.
The camel-vertx-websocket consumer mapped inbound WebSocket query and path parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (VertxWebsocketConsumer.populateExchangeHeaders()). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the affected consumers apply a HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers. |
| Gitea 1.26.2 allows fork synchronization to continue after a parent repository changes from public to private, exposing data to a fork that should no longer be authorized. |
| Gitea 1.26.2 allows unauthorized users to access labels of private organizations. |
| FOSSBilling is a free, open-source billing and client management system. In versions 0.5.3 through 0.7.2, the Guest `serviceapikey/get_info` API endpoint is accessible without authentication. Any caller with a valid API key can retrieve all custom configuration parameters (`custom_*` fields) stored in the key's database record. These custom fields are populated by billing administrators and can contain business-sensitive data such as pricing tiers, feature flags, rate limits, expiry overrides, or access scope data. Version 0.8.0 patches the issue. Some workarounds are available. Administrators can avoid storing sensitive data in `custom_*` API key configuration fields, monitor API logs for suspicious calls to `/api/guest/serviceapikey/get_info`, and/or disable the Serviceapikey module if not in active use. |
| FOSSBilling is a free, open-source billing and client management system. Prior to version 0.8.0, low-privileged staff accounts may read sensitive data via admin API endpoints that lack permission checks. While sibling write endpoints correctly enforce fine-grained permissions, the corresponding read endpoints have no authorization guards. Version 0.8.0 contains a fix. Some workarounds are available. Restrict staff accounts to only those who need access to sensitive data and/or use a reverse proxy or WAF to restrict access to the affected endpoints. |
| FOSSBilling is a free, open-source billing and client management system. Versions prior to 0.8.0 allow low-privileged staff accounts to perform unauthorized actions via admin API endpoints. The root cause is a combination of the `can_always_access` module flag (which grants all staff access to certain modules) and insufficient permission checks or unsafe parameter handling on individual endpoints. Version 0.8.0 contains a fix. Some workarounds are available. Restrict staff accounts to only those who need access to sensitive settings and/or use a reverse proxy or WAF to restrict access to the affected endpoints to trusted IP addresses or higher-privilege roles. |
| In Apache Airflow before 3.3.0, the REST API task-instance detail and list
endpoints returned a deferred task's trigger kwargs without masking. When a
deferred operator passed a secret (for example a provider API key) into its
trigger, any authenticated user with DAG-scoped task-instance read access for
that DAG could read that secret in clear text while the task was deferred.
Users should upgrade to apache-airflow 3.3.0 or later, which masks sensitive
values in trigger kwargs returned by the API. |
| A bug in Apache Airflow's `/ui/dependencies` scheduling graph endpoint applied the caller's readable-Dag filter to the top-level serialized Dag key but still emitted referenced Dag IDs through the `dep.source` and `dep.target` fields of trigger / sensor dependency entries. An authenticated UI user with read permission on some Dags could enumerate the identifiers of other Dags they were not authorized to read by inspecting the dependency graph for trigger / sensor references. Affects deployments that rely on per-Dag read scoping to keep Dag identifiers private across teams. This is a residual gap in the fix for CVE-2026-28563, which filtered the top-level Dag key but did not propagate the filter into the trigger / sensor dep-source / dep-target fields. Users who already upgraded for CVE-2026-28563 should additionally upgrade to `apache-airflow` 3.3.0 or later to cover the residual trigger / sensor dependency leak. |
| Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Atmosphere Websocket Component.
The camel-atmosphere-websocket consumer mapped inbound WebSocket query parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (WebsocketConsumer.sendEventNotification() iterates the query-string map collected in WebsocketConsumer.service() and copies each entry into the Exchange). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the consumer apply the HeaderFilterStrategy it already inherits from the HTTP/servlet stack, filtering the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers. |
| The Slim SEO – A Fast & Automated SEO Plugin For WordPress plugin for WordPress is vulnerable to Unauthorized Private Content Disclosure in all versions up to, and including, 4.9.8 via the `/wp-json/slim-seo/meta-tags/ai` REST API endpoint. This is due to the endpoint's `permission_callback` performing only a top-level `edit_posts` capability check without verifying that the requesting user has read access to the specific post supplied via the `object.ID` parameter, allowing the `generate` function to pass the attacker-controlled post ID to `Data::get_post_content()`, which calls `get_post()` regardless of post status or ownership. This makes it possible for authenticated attackers with Contributor-level access and above to retrieve AI-generated summaries of the raw `post_content` of arbitrary posts they are not authorized to view — including private posts, drafts, pending, future, and password-protected content authored by other users — with the substance of the protected content disclosed via the HTTP response. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Wikimedia Foundation MediaWiki.
This vulnerability is associated with program files includes/Actions/InfoAction.Php.
This issue affects MediaWiki: from * before 1.46.0, 1.45.4, 1.44.6, 1.43.9. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Wikimedia Foundation MediaWiki.
This vulnerability is associated with program files includes/Parser/Parser.Php.
This issue affects MediaWiki: from * before 1.46.0, 1.45.4, 1.44.6, 1.43.9. |
| Notification API leaks private issue metadata after access revocation |
| Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Iggy component.
The camel-iggy consumer mapped the user-headers of inbound Iggy messages into the Camel Exchange header map without applying any HeaderFilterStrategy (IggyFetchRecords copied the message user-headers straight into the Exchange). Because nothing blocked the Camel header namespace, an actor able to publish to the consumed Iggy stream/topic could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as message user-headers. In a route where the Iggy consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets.
This issue affects Apache Camel: from 4.17.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds a dedicated IggyHeaderFilterStrategy (and a headerFilterStrategy endpoint option) that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), restrict who can publish to the consumed Iggy stream/topic, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers. |
| Exposure of sensitive information to an unauthorized actor in Microsoft Edge (Chromium-based) allows an unauthorized attacker to perform spoofing over a network. |
| A vulnerability has been found in DeepMyst Mysti up to 0.4.0. The affected element is the function initProjectMemory of the file src/managers/MemoryManager.ts of the component Per-Project Auto-Memory Handler. Such manipulation of the argument workspacePath leads to exposure of resource. The attack may be performed from remote. Upgrading to version 0.4.0 is sufficient to fix this issue. The name of the patch is 6d709229b5199f6769fb3cf763e5122dcc43c079. It is advisable to upgrade the affected component. |
