| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Latch disable_idle_d3 per device
When disable_idle_d3 was introduced in vfio-pci, it directly manipulated
the device power state with pci_set_power_state(). There were no
refcounts to maintain or balanced operations, we could unconditionally
bring the device to D0 and conditionally move it to D3hot. Therefore
the module parameter was made writable.
Later, in commit c61302aa48f7 ("vfio/pci: Move module parameters to
vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect
of the module parameter was nullified. The parameter value could still
be changed through sysfs, but the vfio-pci driver latched the values
into vfio-pci-core globals at module init. Loading the vfio-pci module,
or unloading and reloading, with non-default or different values could
change the globals relative to existing devices bound to vfio-pci
variant drivers.
Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move the
unused device into low power state with runtime PM"), which marks the
point where power states became refcounted. PM get and put operations
need to be balanced, but the same module operations noted above can
change the global variables relative to those devices already bound to
vfio-pci variant drivers. This introduces a window where PM operations
can now become unbalanced.
To resolve this with a narrow footprint for stable backports, the
disable_idle_d3 flag is latched into the vfio_pci_core_device at the
time of initialization, such that the device always operates with a
consistent value.
NB. vfio_pci_dev_set_try_reset() now unconditionally raises the
runtime PM usage count around bus reset to account for disable_idle_d3
becoming a per-device rather than global flag. When this flag is set,
the additional get/put pair is harmless and allows continued use of the
shared vfio_pci_dev_set_pm_runtime_get() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/cs35l41: Fix firmware load work teardown
cs35l41_hda creates ALSA controls whose private data points at the
cs35l41_hda object. The firmware load control can also queue
fw_load_work.
Those controls are not removed on component unbind, and device remove
only cancels fw_load_work through cs35l41_remove_dsp(). That helper is
skipped when halo_initialized is false. With firmware_autostart
disabled, a firmware load can be requested before the DSP has been
initialized. If the component or device is removed before the queued
work runs, the worker can run after teardown and dereference driver
state that is no longer valid.
Track the created controls and remove them on unbind so no new control
callback can reach the driver data or queue more work. Then cancel
fw_load_work to drain any request that was already queued. Also cancel
the work unconditionally during device remove before runtime PM teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: us144mkii: fix work UAF on disconnect
tascam_disconnect() cancels capture_work and midi_in_work before
usb_kill_anchored_urbs() kills the capture/MIDI-in URBs. Those URBs
self-resubmit, and their completion handlers reschedule the work.
A URB that completes in the small window between cancel_work_sync() and
usb_kill_anchored_urbs() therefore re-arms the work after its only
cancel. Nothing cancels it again before snd_card_free() frees the
card-private tascam structure, so the work handler then runs on freed
memory.
Kill the anchored URBs before cancelling the work; once the work is
cancelled no remaining URB can complete to re-arm it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Support for hardening against JIT spraying
The BPF JIT allocator packs many small programs into larger executable
allocations and reuses space within those allocations as programs are
loaded and freed. When fresh code is written into space that a previous
program occupied, an indirect jump into the new program can reuse a branch
prediction left behind by the old one.
Flush the indirect branch predictors before reusing JIT memory so that
indirect jumps into a newly written program don't reuse predictions from an
old program that occupied the same space.
Introduce bpf_arch_pred_flush_enabled static key and bpf_arch_pred_flush
static call for flushing the branch predictors on JIT memory reuse.
Architectures that need a flush, can update it to a predictor flush
function. By default, its a NOP and does not emit any CALL.
Allocations larger than a pack are not covered by this flush. That is safe
because cBPF programs (the unprivileged attack surface) are bounded well
below a pack size. Issue a warning if this assumption is ever violated
while the flush is active. |
| Vikunja versions >= 0.24.0 and <= 2.3.0 contain a broken object level authorization (BOLA) vulnerability in the task-collection endpoint (GET /api/v1/projects/{project}/views/{view}/tasks). The endpoint loads the requested project view from the URL path without verifying the caller is authorized for it. For a link-share token holder, the task scope is pinned to the share's own project, but the view is taken from the attacker-controlled path and never re-validated. As a result, a holder of any project share link can read any other tenant's kanban bucket records — bucket titles and the full created_by user object (username, name, id) — for every view in the instance. The same missing pre-authorization view load also creates a project/view-ID existence oracle (404 vs. non-404) usable by link shares and ordinary authenticated users. Task contents remain constrained to the share's own project and are not disclosed. Fixed in 2.4.0. |
| FreeRDP before 3.29.0 contains integer overflow vulnerabilities in the audio input redirection channel (audin) across ALSA, sndio, WinMM, and OpenSL ES backends that fail to validate the FramesPerPacket parameter from RDP servers. Attackers can supply a malicious FramesPerPacket value causing allocation size wraparound, resulting in heap-based buffer overflow on ALSA or denial of service on all platforms. |
| FreeRDP before 3.30.0 (<= 3.29.0) contains a heap-based buffer overflow in the Windows clipboard client's CliprdrStream_Read function (client/Windows/wf_cliprdr.c). When an OLE paste consumer (e.g. explorer.exe) calls IStream::Read with a fixed-size buffer of cb bytes, CliprdrStream_Read requests file contents from the RDP server and then copies the response into the caller's buffer using the server-supplied length (req_fsize) instead of cb. A malicious or compromised RDP server can return an oversized CB_FILECONTENTS_RESPONSE, causing an out-of-bounds write of attacker-controlled data into the paste consumer's heap buffer when a user pastes server-offered clipboard file contents. |
| better-auth passkey versions before 1.4.0 contain an insecure direct object reference vulnerability in the passkey deletion endpoint that allows authenticated users to delete arbitrary passkeys by ID. Attackers with valid sessions can submit crafted requests to the delete-passkey endpoint with enumerated passkey IDs to remove other users' passkeys. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vce1: Fix VCE 1 firmware size and offsets
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
Make sure the stack and data offsets are aligned to
the 32K TLB size.
Check that the FW microcode actually fits in the
space that is reserved for it.
(cherry picked from commit c16fe59f622a080fc457a57b3e8f14c780699449) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/gsc: Fix double-free of managed BO in error path
The error path in xe_gsc_init_post_hwconfig() explicitly frees a BO
allocated with xe_managed_bo_create_pin_map() via
xe_bo_unpin_map_no_vm(). Since the managed BO already has a devm
cleanup action registered, this causes a double-free when devm
unwinds during probe failure.
Remove the explicit free and let devm handle it, consistent with
all other xe_managed_bo_create_pin_map() callers.
(cherry picked from commit 71d61e3e299a17139e47f980a4d6f425b2c59bf7) |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix infinite loop in layout state revocation
find_one_sb_stid() skips stids whose sc_status is non-zero, but the
SC_TYPE_LAYOUT case in nfsd4_revoke_states() never sets sc_status
before calling nfsd4_close_layout(). The retry loop therefore finds
the same layout stid on every iteration, hanging the revoker
indefinitely. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: meson: amlogic-a4: fix deadlock issue
Accessing the pinconf-pins sysfs node may deadlock.
pinconf_pins_show() holds pctldev->mutex, and the platform driver
calls pinctrl_find_gpio_range_from_pin(), which tries to acquire
the same mutex again, leading to a deadlock.
Use pinctrl_find_gpio_range_from_pin_nolock() to fix this issue. |
| An issue was discovered in Quest KACE Systems Deployment Appliance (SMA) 11.0.273. It installs with default user credentials. The kbftp account has a password of getbxf, which is publicly known and documented. This allows remote attackers to trivially gain privileged access to the FTP service interface, which contains MySQL backups. Sensitive information is stored in the database, such as privileged credentials for other systems. |
| An issue was discovered in Quest KACE Systems Deployment Appliance (SMA) 11.0.273. Certain API endpoints contain a rate-limiting feature to minimize a brute-force attack. This protection can be bypassed by removing the kboxid cookie. |
| SQL injection vulnerability exists in the order_by parameter of the /customers/search endpoint in Alex Tselegidis EasyAppointments <= 1.5.1. The vulnerability arises from unsanitized user input passed to the order_by method of the CodeIgniter Query Builder, enabling attackers to perform time-based queries and schema enumeration. Under certain MySQL configurations, the flaw may lead to remote code execution by writing a PHP shell using INTO OUTFILE. |
| axios versions 0.31.1 before 0.33.0 and 1.15.1 before 1.18.0 contain an incomplete depth-limit bypass in toFormData.js when serializing objects with top-level keys ending in '{}'. Attackers who control object keys and nested values passed to axios form or parameter serialization can trigger a RangeError from JSON.stringify, causing denial of service in the affected request path. |
| axios versions 0.31.0 before 0.33.0 and 1.15.0 before 1.18.0 fail to recognize 0.0.0.0 as a loopback address in shouldBypassProxy.js, allowing requests to 0.0.0.0 to bypass NO_PROXY rules. Attackers can supply 0.0.0.0 URLs to route requests through configured proxies, potentially exposing local services when the proxy can reach the destination. |
| Wazuh workflows before 44bf114 contain a shell injection vulnerability in GitHub Actions that allows attackers to execute arbitrary commands by submitting pull requests with crafted VERSION.json files. Attackers can inject shell metacharacters into environment variables that are directly interpolated into run steps, enabling command execution and exfiltration of secrets including GITHUB_TOKEN and AWS credentials on self-hosted runners. |
| Improper access control in the NetBox synchronizer in Devolutions Server allows an authenticated user with view-only permission on an entry to obtain a stored API token via the partial connection endpoint.
This issue affects :
* Devolutions Server 2026.2.4.0 through 2026.2.12.0
* Devolutions Server 2026.1.23.0 and earlier |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix stack OOB write when prepending the Flags AD
eir_create_adv_data() builds the advertising data into a fixed-size
buffer ("size", 31 for the legacy path). It may prepend a 3-byte "Flags"
AD structure (LE_AD_NO_BREDR on an LE-only controller) and then copies
the per-instance data without checking that it still fits:
memcpy(ptr, adv->adv_data, adv->adv_data_len);
tlv_data_max_len() only reserves those 3 bytes when the user-supplied
flags carry a managed-flags bit, so an instance added with flags == 0 is
accepted with adv_data_len up to the full buffer. At advertise time the
flags are still prepended, and the memcpy() writes 3 + adv_data_len
bytes into the size-byte buffer:
BUG: KASAN: stack-out-of-bounds in eir_create_adv_data (net/bluetooth/eir.c:301)
Write of size 31 at addr ffff88800a547bdc by task kworker/u9:0/65
Workqueue: hci0 hci_cmd_sync_work
__asan_memcpy (mm/kasan/shadow.c:106)
eir_create_adv_data (net/bluetooth/eir.c:301)
hci_update_adv_data_sync (net/bluetooth/hci_sync.c:1310)
hci_schedule_adv_instance_sync (net/bluetooth/hci_sync.c:1817)
hci_cmd_sync_work (net/bluetooth/hci_sync.c:332)
This frame has 1 object:
[32, 64) 'cp'
The "Flags" structure is added by the kernel, not requested by
userspace, so only prepend it when it fits together with the instance
advertising data; when there is no room for both, drop the flags rather
than the user-provided data.
Reachable by a local user with CAP_NET_ADMIN owning an LE-only
controller on the legacy advertising path. |
