| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: spacemit: clear TX descriptor on fragment mapping failure
emac_tx_mem_map() writes TX_DESC_0_OWN into the ring descriptor for
every slot beyond old_head as soon as that slot's memset()'d local
copy is committed with "*tx_desc_addr = tx_desc", i.e. before the
buffers for that slot have necessarily all been mapped successfully.
If emac_tx_map_frag() then fails on a later fragment, the err_free_skb
path calls emac_free_tx_buf() to unmap and drop the skb, but leaves
the already-written descriptor memory untouched, and tx_ring->head is
never advanced past old_head (the "tx_ring->head = head" store is
skipped by the goto).
So a slot between old_head and the rolled-back head can be left with
TX_DESC_0_OWN set and buffer_addr_{1,2} pointing at DMA mappings that
emac_free_tx_buf() just tore down, while software considers that slot
free again. The next successful emac_tx_mem_map() call only rebuilds
old_head itself; if the DMA engine auto-advances into the following
descriptor once it finishes old_head's packet, it will fetch that
stale, already-unmapped address.
emac_tx_clean_desc() already treats emac_free_tx_buf() and clearing
the descriptor as a pair when reclaiming completed descriptors; do
the same in the mapping failure path. |
| Untrusted pointer dereference in Windows Network File System allows an authorized attacker to disclose information locally. |
| Untrusted pointer dereference in Windows NTFS allows an authorized attacker to elevate privileges locally. |
| when EAP runs with -secmgr, the openjdk-orb's JDKBridge honours attacker-supplied CDR codebase URLs during object unmarshalling on :3528, allowing an unauthenticated attacker to load and instantiate arbitrary classes from a remote URL in the server JVM before EJB security interceptors run. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: do not dissolve gigantic pages without runtime support
dissolve_free_hugetlb_folio() doesn't check
hstate_is_gigantic_no_runtime(h) though remove_hugetlb_folio()/
update_and_free_hugetlb_folio() silently bail for such folios, so it frees
a still-listed folio and, on vmemmap restore failure, the
add_hugetlb_folio() rollback corrupts the free list. |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: report a Tasks-RCU quiescent state per cgwb drain pass
cleanup_offline_cgwbs_workfn() drains a dying cgwb by calling
cleanup_offline_cgwb() until it returns false, with a cond_resched()
between passes. On a CONFIG_PREEMPTION kernel that cond_resched() does
nothing: _cond_resched() is a plain "return 0", and under PREEMPT_DYNAMIC
the full and lazy modes disable it. Since commit 7dadeaa6e851 ("sched:
Further restrict the preemption modes") those are the only two models on
the architectures with PREEMPT_LAZY support, arm64 and x86 among them, so
the drain loop never reports a Tasks-RCU quiescent state.
A worker draining a cgwb with millions of attached inodes runs for
minutes. On a 6.18 arm64 host in lazy mode the cgwb worker drained one
dying cgroup's writeback domain for over 11 minutes. A BPF program unlink
(bpf_trampoline_unlink_prog -> bpf_trampoline_update ->
unregister_ftrace_direct -> ftrace_shutdown -> synchronize_rcu_tasks())
waited on that grace period while holding the trampoline mutex, 42 tasks
queued behind it in D state, and the hung task detector fired at 614 s and
panicked the host. Any BPF or ftrace detach during a long drain inherits
the drain's length.
Fix this by calling cond_resched_tasks_rcu_qs() so we do not stall out
anybody who calls sycnrhonize_rcu_tasks(). We put this in a do { } while
loop because if we have many small cgroups cleanup_offline_cgwb() will
return false and we will never call cond_resched_tasks_rcu_qs(), creating
the same problem. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Derive SCX_RQ_IN_WAKEUP from the core enqueue flags
schedule_deferred_locked() skips scheduling a deferred action while
SCX_RQ_IN_WAKEUP is set and relies on the task_woken_scx() call that follows
a wakeup enqueue to run it. enqueue_task_scx() sets the flag from the merged
enqueue flags, which include the flags stashed for a remote activation.
move_remote_task_to_local_dsq() thus sets SCX_RQ_IN_WAKEUP on the
destination rq when the moved task was woken up, although no
task_woken_scx() follows that activation.
An IMMED insert into a busy destination requests a local reenqueue during
that enqueue. The request gets linked but not scheduled and stays pending
until an unrelated wakeup or preemption on that CPU runs the deferred
actions. The IMMED task sits behind the running task in the meantime. If
nothing runs them before the scheduler is disabled, the request outlives the
scheduler and points into its freed per-cpu area, which the next scheduler
dereferences from run_deferred().
Test the core enqueue flags for the wakeup bit. Only the core's wakeup path
is followed by task_woken_scx(). |
| In the Linux kernel, the following vulnerability has been resolved:
packet: use ubuf_info completion for TX_RING packets
tpacket_snd sends skbs with frags pointing into its ring slots. Slots
are released when skb->destructor is called.
A call to skb_orphan calls skb->destructor before the skb is freed.
This can cause the slot to be reused while still linked into the skb.
Switch to standard zerocopy completion (ubuf_info) so the slot is only
released once all references to the payload are freed or copied.
Restore skb->destructor to standard sock_wfree.
The ubuf_info completion callback can be called with a NULL skb, but
only from net_zcopy_put and related API, used by zerocopy implementations
that hold their own reference on the uarg, such as MSG_ZEROCOPY. This
uarg is only ever completed from skb_zcopy_clear, so skb is always set.
To prevent userspace from aliasing in-flight state on shared ring
slots, allocate tpacket_uarg per packet, rather than per slot. This
adds a small allocation to the transmit path. Use standard kmalloc to
allow backporting to stable kernels.
The uarg holds an sk_wmem_alloc reference, rather than an sk_refcnt
reference. packet_free_tx_ring waits on sk_wmem_alloc before freeing
the ring pages. Always allocate vec->deferred for tx_ring so page-backed
rings also wait on sk_wmem_alloc when skb_copy_ubufs drops page refs
before calling tpacket_ubuf_complete.
Drop the tx_ring.pg_vec test that tpacket_destruct_skb performed before
accessing the slot. The sk_wmem_alloc reference now guarantees that the
slot is valid. The test is also not sufficient by itself, as it reads
pg_vec without pg_vec_lock, so it can race with packet_set_ring.
As a result a slot is released when its payload is copied, which can
be before transmission (e.g., in skb_orphan_frags_rx). If copied
before skb_tx_timestamp() is called, no slot timestamp is recorded,
similar to when skb_orphan() was called early in the datapath before
this patch.
Revert the now unused previous skb_zcopy_.._nouarg infra.
Depends on commit 992cc9f94ca9 ("net/packet: defer vmalloc TX_RING
free until skbs finish"). |
| In the Linux kernel, the following vulnerability has been resolved:
rds: ib: Clear the sg list when mapping an MR fails
rds_ib_map_frmr() stores the caller's scatterlist in the MR before DMA
mapping and registration can fail. On failure, __rds_rdma_map() unpins
the pages and frees the scatterlist, but rds_ib_free_frmr() can still
return the MR to the pool with the stale pointer set.
This leaves the pool with a dangling scatterlist and can lead to local
privilege escalation. KASAN detects the resulting use-after-free when the
MR is later torn down:
BUG: KASAN: slab-use-after-free in __rds_ib_teardown_mr
Read of size 8
Call Trace:
__rds_ib_teardown_mr
rds_ib_unreg_frmr
rds_ib_flush_mr_pool
rds_ib_flush_mrs
rds_free_mr
rds_setsockopt
Store the scatterlist in the MR only after DMA mapping succeeds. If DMA
mapping fails, return directly while the MR fields remain clear; the caller
keeps ownership of the scatterlist and its pinned pages. If a later
registration step fails, unmap the scatterlist and clear the MR fields
before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes: Fix permanent hang when flushing the kprobe optimizer
Writing 0 to /proc/sys/debug/kprobes-optimization while a kprobe is
jump-optimized never returns. The writer sleeps in D state forever with
kprobe_sysctl_mutex held, so any later read or write of that sysctl
hangs as well. For example, with vfs_read+9 as an optimizable address
in this build:
# cd /sys/kernel/tracing
# echo 'p:myprobe vfs_read+9' >> kprobe_events
# echo 1 > events/kprobes/myprobe/enable
# # wait until /sys/kernel/debug/kprobes/list shows [OPTIMIZED]
# echo 0 > /proc/sys/debug/kprobes-optimization
INFO: task sh:246 blocked for more than 10 seconds.
Call Trace:
<TASK>
__schedule+0x1176/0x4f70
schedule+0xdc/0x2c0
schedule_timeout+0x17b/0x260
wait_for_completion+0x173/0x3c0
wait_for_kprobe_optimizer_locked+0xbc/0x130
proc_kprobes_optimization_handler+0x156/0x1b0
proc_sys_call_handler+0x324/0x490
vfs_write+0x52d/0xfe0
ksys_write+0xff/0x200
do_syscall_64+0x106/0x630
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
...
INFO: task cat:265 is blocked on a mutex likely owned by task sh:246.
wait_for_kprobe_optimizer_locked() reinitializes optimizer_completion,
asks the optimizer thread to flush and sleeps in wait_for_completion().
The thread drains the (un)optimizing lists, but calls complete() only
if completion_done() is true, i.e. if the completion is already done,
which never happens while someone waits. disarm_all_kprobes() and
kprobe_trace_self_tests_init() wait the same way.
Calling complete() unconditionally would not be enough: the waiter
drops kprobe_mutex while it sleeps, and nothing else serializes the
sysctl handler against the debugfs "enabled" file. A second flusher
that still finds the lists non-empty, e.g. because a disabled probe is
queued for unoptimizing, reinitializes the completion under the first:
sysctl write debugfs "enabled" write
unoptimize_all_kprobes()
wait_for_kprobe_optimizer_locked()
init_completion(c)
mutex_unlock(&kprobe_mutex)
wait_for_completion(c)
disarm_all_kprobes()
wait_for_kprobe_optimizer_locked()
init_completion(c)
// c->wait is reset, the first
// waiter is off the queue
mutex_unlock(&kprobe_mutex)
wait_for_completion(c)
kprobe_optimizer()
complete(c)
// wakes the debugfs writer only
where c is &optimizer_completion. Lining up the two writes during an
optimizer pass loses the sysctl writer this way.
Replace the completion with a counter of optimizer passes, bumped at the
end of each pass and signalled with wake_up_var_locked(), both under
kprobe_mutex. A flusher samples the count and waits with
wait_var_event_mutex(), which drops kprobe_mutex only while sleeping, so
a new count means a whole pass ran in the meantime. Nothing is
reinitialized, so several flushers can sleep in the wait at once. |
| In the Linux kernel, the following vulnerability has been resolved:
ipe: fix use-after-free when auditing a newly loaded policy
new_policy() audits the policy after ipe_new_policyfs_node() publishes it
and drops the new directory's inode lock. A concurrent delete can free
the policy while ipe_audit_policy_load() is still using it.
Audit the successful load under that lock.
[FW: remove model name according to latest guideline] |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: flush dirty data before zeroing a range
smb3_zero_range() emulates FALLOC_FL_ZERO_RANGE by invalidating the
page cache over the target range with truncate_pagecache_range() and
then issuing FSCTL_SET_ZERO_DATA to the server.
Dirty data was only flushed conditionally, when the range reached or
extended EOF. For a purely interior zero range that does not reach
EOF, no flush happened, so a dirty folio overlapping the range could
be written back to the server after the FSCTL and refill the range
that was just zeroed with stale data.
Fix this by unconditionally flushing and waiting for dirty data in the
range before invalidating the page cache and issuing
FSCTL_SET_ZERO_DATA, exactly as was done for smb3_punch_hole() in
commit d7d2adcd022b ("smb/client: flush dirty data before punching a
hole"); the two paths are structurally identical here.
This is observed as generic/363 randomly reading stale data where a
zeroed range is expected against Windows Server. |
| Untrusted pointer dereference in Microsoft Office Word allows an unauthorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Clear __hyp_running_vcpu when flushing the pKVM hyp vCPU
flush_hyp_vcpu() copies the host vCPU context into the hyp's private
vCPU on every run. ctxt_to_vcpu() expects a guest context to have a
NULL __hyp_running_vcpu, which is only ever set on the host context, so
that it resolves the vCPU via container_of(). While this is generally
the case, flush_hyp_vcpu() copies the context verbatim and does not
enforce this, so a value provided by the host is dereferenced at EL2
(host -> EL2).
Fix by clearing __hyp_running_vcpu after the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6: vti: Use ip6_tnl.net in vti6_changelink().
ip netns add ns1
ip netns add ns2
ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7
ip -n ns1 link set vti6_test netns ns2
ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9
ip netns del ns2
ip netns del ns1
[ 132.495484] ------------[ cut here ]------------
[ 132.497609] kernel BUG at net/core/dev.c:12376!
Commit 61220ab34948 ("vti6: Enable namespace changing") dropped
NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then
move through IFLA_NET_NS_FD. After the move dev_net(dev) points
at the new netns while t->net stays at the creation netns.
vti6_changelink() and vti6_update() still use dev_net(dev) and
dev_net(t->dev). They unlink from one per netns hash and relink
into another. The creation netns is left with a stale entry.
cleanup_net() of that netns later walks freed memory.
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net). Cross tenant scope on container hosts. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phylink: record the PHY only once bringup cannot fail
phylink_bringup_phy() stores the PHY in pl->phydev before its last
fallible step: on a MAC whose phylink ops implement LPI,
phy_eee_rx_clock_stop() can fail with a real MDIO error. The callers
unwind with phy_detach(), which knows nothing about pl->phydev, so a
pointer to a PHY that is no longer attached outlives the failed
connect.
What that costs depends on how the caller got here.
phylink_connect_phy() goes through phylink_attach_phy(), which refuses
to attach while pl->phydev is set, turning a transient MDIO error into
a permanent -EBUSY. The SFP path is worse than that: sfp_sm_probe_phy()
answers the failure with phy_device_remove() and phy_device_free(), and
it assigns sfp->mod_phy only past that error return, so nothing clears
pl->phydev and it is left pointing at a freed phy_device that
phylink_resolve() and the ethtool helpers go on reading.
phylink_fwnode_phy_connect() has no such check, so a later connect
overwrites the stale pointer and hides the problem. A disconnect does
not: phylink_disconnect_phy() hands that pointer to phy_disconnect(),
and the second phy_detach() on the same PHY drops references the first
one already released.
Found while making a DSA port survive a PHY whose driver arrives after
the switch probes: keeping the port across a failed connect and
retrying is what makes this window reachable.
Publish the pointer after the last call that can fail instead of
unwinding it afterwards. Nothing between the two points reads
pl->phydev, and the registration that follows cannot fail:
phy_request_interrupt() falls back to polling on its own. The PHY-side
state keeps the order it had, so no MDIO operation moves relative to
another. |
| A flaw was found in DPDK lib/vhost vhost-crypto. Write-back chain cleanup can follow an uninitialized next pointer when mapping a guest descriptor fails, causing the host vhost-crypto process to hang or crash. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: diag: reject stale associations in dump_one path
The SCTP exact sock_diag lookup can hold a transport reference, block on
lock_sock(sk), and then resume after sctp_association_free() has marked
the association dead and freed its bind address list.
When that happens, inet_assoc_attr_size() and
inet_diag_msg_sctpasoc_fill() can still dereference association state
that is no longer valid for reporting. In particular,
inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a
real sctp_sockaddr_entry and trigger an out-of-bounds read from
unrelated association memory.
Reject the association after taking the socket lock if it has been
reaped or detached from the endpoint, and report the lookup as stale.
This keeps the exact dump-one path from formatting torn association
state. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Hold map BTF for the memory allocator destructor record
bpf_ma_set_dtor() duplicates map->record so that the bpf_mem_alloc
destructor can release the special fields of hash and rhash map elements
once the allocator frees them for good. btf_record_dup() only acquires
references on kernel and module BTF. Fields whose types live in the map
BTF keep pointing into it: a kptr to a local type refers to map->btf,
and a list_head or rb_root field carries a value_rec owned by the struct
meta table of map->btf.
That borrowed state can outlive the map. When RCU callbacks are still in
flight, bpf_mem_alloc_destroy() copies the allocator and defers the final
drain, together with the destructor context, to a workqueue.
bpf_map_free() then frees map->record and drops the map's BTF reference
as soon as map_free() returns. Once the program that loaded the BTF is
gone as well, the BTF is freed while the worker still uses the
duplicate. The worker dereferences it through btf_is_kernel() and
btf_find_struct_meta() in bpf_obj_free_fields() when destroying elements
that were freed under RCU, and through btf_is_kernel() in
btf_record_free() when releasing the context itself:
BUG: KASAN: slab-use-after-free in btf_is_kernel+0x19/0x30
Read of size 1 at addr ffff88811505dce8 by task kworker/u16:2/50
Workqueue: events_unbound free_mem_alloc_deferred
Call Trace:
btf_is_kernel+0x19/0x30
btf_record_free+0xc7/0xf0
htab_dtor_ctx_free+0x1a/0x30
free_mem_alloc_no_barrier+0x39/0x230
free_mem_alloc_deferred+0x2a/0x40
process_scheduled_works+0x5ce/0x9d0
worker_thread+0x42a/0x5e0
kthread+0x1f5/0x230
ret_from_fork+0x1dd/0x390
ret_from_fork_asm+0x1a/0x30
Allocated by task 358:
__kmalloc_cache_noprof+0x287/0x510
btf_new_fd+0xf7/0x3d0
__sys_bpf+0x487/0x840
Freed by task 0:
kfree+0x186/0x560
rcu_core+0x6f6/0xd40
Freeing a map that still holds more elements than the allocator's high
watermark is enough to get there, because the bulk free during teardown
queues the RCU callback that makes bpf_mem_alloc_destroy() defer.
Non-preallocated hash maps and resizable hash maps both register the
destructor and are affected alike.
Keep one reference on the map BTF in the destructor context. Every
non-kernel pointer in the duplicated record is either map->btf or memory
owned by it, so a single reference covers kptrs, list heads, and rb
roots, and mirrors what bpf_map_meta_alloc() does for the duplicated
record of an inner map. Release it only after the duplicated record has
been freed: the worker is preemptible and not in an RCU read-side
critical section, so dropping the last reference first would let the
BTF be freed while btf_record_free() still reads its fields. |
| Untrusted pointer dereference in RPC Runtime allows an unauthorized attacker to execute code over a network. |
