| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: add list empty check to avoid null pointer issue
Add list empty check to avoid null pointer issues in some corner cases.
- list_for_each_entry_safe() |
| In the Linux kernel, the following vulnerability has been resolved:
mm/filemap: fix filemap_get_folios_contig THP panic
Patch series "memfd-pin huge page fixes".
Fix multiple bugs that occur when using memfd_pin_folios with hugetlb
pages and THP. The hugetlb bugs only bite when the page is not yet
faulted in when memfd_pin_folios is called. The THP bug bites when the
starting offset passed to memfd_pin_folios is not huge page aligned. See
the commit messages for details.
This patch (of 5):
memfd_pin_folios on memory backed by THP panics if the requested start
offset is not huge page aligned:
BUG: kernel NULL pointer dereference, address: 0000000000000036
RIP: 0010:filemap_get_folios_contig+0xdf/0x290
RSP: 0018:ffffc9002092fbe8 EFLAGS: 00010202
RAX: 0000000000000002 RBX: 0000000000000002 RCX: 0000000000000002
The fault occurs here, because xas_load returns a folio with value 2:
filemap_get_folios_contig()
for (folio = xas_load(&xas); folio && xas.xa_index <= end;
folio = xas_next(&xas)) {
...
if (!folio_try_get(folio)) <-- BOOM
"2" is an xarray sibling entry. We get it because memfd_pin_folios does
not round the indices passed to filemap_get_folios_contig to huge page
boundaries for THP, so we load from the middle of a huge page range see a
sibling. (It does round for hugetlbfs, at the is_file_hugepages test).
To fix, if the folio is a sibling, then return the next index as the
starting point for the next call to filemap_get_folios_contig. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Fix H264 stateless decoder smatch warning
Fix a smatch static checker warning on vdec_h264_req_if.c.
Which leads to a kernel crash when fb is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Don't zero-out PMU snapshot area before freeing data
With the latest Linux-6.11-rc3, the below NULL pointer crash is observed
when SBI PMU snapshot is enabled for the guest and the guest is forcefully
powered-off.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000508
Oops [#1]
Modules linked in: kvm
CPU: 0 UID: 0 PID: 61 Comm: term-poll Not tainted 6.11.0-rc3-00018-g44d7178dd77a #3
Hardware name: riscv-virtio,qemu (DT)
epc : __kvm_write_guest_page+0x94/0xa6 [kvm]
ra : __kvm_write_guest_page+0x54/0xa6 [kvm]
epc : ffffffff01590e98 ra : ffffffff01590e58 sp : ffff8f80001f39b0
gp : ffffffff81512a60 tp : ffffaf80024872c0 t0 : ffffaf800247e000
t1 : 00000000000007e0 t2 : 0000000000000000 s0 : ffff8f80001f39f0
s1 : 00007fff89ac4000 a0 : ffffffff015dd7e8 a1 : 0000000000000086
a2 : 0000000000000000 a3 : ffffaf8000000000 a4 : ffffaf80024882c0
a5 : 0000000000000000 a6 : ffffaf800328d780 a7 : 00000000000001cc
s2 : ffffaf800197bd00 s3 : 00000000000828c4 s4 : ffffaf800248c000
s5 : ffffaf800247d000 s6 : 0000000000001000 s7 : 0000000000001000
s8 : 0000000000000000 s9 : 00007fff861fd500 s10: 0000000000000001
s11: 0000000000800000 t3 : 00000000000004d3 t4 : 00000000000004d3
t5 : ffffffff814126e0 t6 : ffffffff81412700
status: 0000000200000120 badaddr: 0000000000000508 cause: 000000000000000d
[<ffffffff01590e98>] __kvm_write_guest_page+0x94/0xa6 [kvm]
[<ffffffff015943a6>] kvm_vcpu_write_guest+0x56/0x90 [kvm]
[<ffffffff015a175c>] kvm_pmu_clear_snapshot_area+0x42/0x7e [kvm]
[<ffffffff015a1972>] kvm_riscv_vcpu_pmu_deinit.part.0+0xe0/0x14e [kvm]
[<ffffffff015a2ad0>] kvm_riscv_vcpu_pmu_deinit+0x1a/0x24 [kvm]
[<ffffffff0159b344>] kvm_arch_vcpu_destroy+0x28/0x4c [kvm]
[<ffffffff0158e420>] kvm_destroy_vcpus+0x5a/0xda [kvm]
[<ffffffff0159930c>] kvm_arch_destroy_vm+0x14/0x28 [kvm]
[<ffffffff01593260>] kvm_destroy_vm+0x168/0x2a0 [kvm]
[<ffffffff015933d4>] kvm_put_kvm+0x3c/0x58 [kvm]
[<ffffffff01593412>] kvm_vm_release+0x22/0x2e [kvm]
Clearly, the kvm_vcpu_write_guest() function is crashing because it is
being called from kvm_pmu_clear_snapshot_area() upon guest tear down.
To address the above issue, simplify the kvm_pmu_clear_snapshot_area() to
not zero-out PMU snapshot area from kvm_pmu_clear_snapshot_area() because
the guest is anyway being tore down.
The kvm_pmu_clear_snapshot_area() is also called when guest changes
PMU snapshot area of a VCPU but even in this case the previous PMU
snaphsot area must not be zeroed-out because the guest might have
reclaimed the pervious PMU snapshot area for some other purpose. |
| In the Linux kernel, the following vulnerability has been resolved:
netkit: Assign missing bpf_net_context
During the introduction of struct bpf_net_context handling for
XDP-redirect, the netkit driver has been missed, which also requires it
because NETKIT_REDIRECT invokes skb_do_redirect() which is accessing the
per-CPU variables. Otherwise we see the following crash:
BUG: kernel NULL pointer dereference, address: 0000000000000038
bpf_redirect()
netkit_xmit()
dev_hard_start_xmit()
Set the bpf_net_context before invoking netkit_xmit() program within the
netkit driver. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx5: Fix UMR pd cleanup on error flow of driver init
The cited commit moves the pd allocation from function
mlx5r_umr_resource_cleanup() to a new function mlx5r_umr_cleanup().
So the fix in commit [1] is broken. In error flow, will hit panic [2].
Fix it by checking pd pointer to avoid panic if it is NULL;
[1] RDMA/mlx5: Fix UMR cleanup on error flow of driver init
[2]
[ 347.567063] infiniband mlx5_0: Couldn't register device with driver model
[ 347.591382] BUG: kernel NULL pointer dereference, address: 0000000000000020
[ 347.593438] #PF: supervisor read access in kernel mode
[ 347.595176] #PF: error_code(0x0000) - not-present page
[ 347.596962] PGD 0 P4D 0
[ 347.601361] RIP: 0010:ib_dealloc_pd_user+0x12/0xc0 [ib_core]
[ 347.604171] RSP: 0018:ffff888106293b10 EFLAGS: 00010282
[ 347.604834] RAX: 0000000000000000 RBX: 000000000000000e RCX: 0000000000000000
[ 347.605672] RDX: ffff888106293ad0 RSI: 0000000000000000 RDI: 0000000000000000
[ 347.606529] RBP: 0000000000000000 R08: ffff888106293ae0 R09: ffff888106293ae0
[ 347.607379] R10: 0000000000000a06 R11: 0000000000000000 R12: 0000000000000000
[ 347.608224] R13: ffffffffa0704dc0 R14: 0000000000000001 R15: 0000000000000001
[ 347.609067] FS: 00007fdc720cd9c0(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000
[ 347.610094] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 347.610727] CR2: 0000000000000020 CR3: 0000000103012003 CR4: 0000000000370eb0
[ 347.611421] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 347.612113] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 347.612804] Call Trace:
[ 347.613130] <TASK>
[ 347.613417] ? __die+0x20/0x60
[ 347.613793] ? page_fault_oops+0x150/0x3e0
[ 347.614243] ? free_msg+0x68/0x80 [mlx5_core]
[ 347.614840] ? cmd_exec+0x48f/0x11d0 [mlx5_core]
[ 347.615359] ? exc_page_fault+0x74/0x130
[ 347.615808] ? asm_exc_page_fault+0x22/0x30
[ 347.616273] ? ib_dealloc_pd_user+0x12/0xc0 [ib_core]
[ 347.616801] mlx5r_umr_cleanup+0x23/0x90 [mlx5_ib]
[ 347.617365] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x36/0x40 [mlx5_ib]
[ 347.618025] __mlx5_ib_add+0x96/0xd0 [mlx5_ib]
[ 347.618539] mlx5r_probe+0xe9/0x310 [mlx5_ib]
[ 347.619032] ? kernfs_add_one+0x107/0x150
[ 347.619478] ? __mlx5_ib_add+0xd0/0xd0 [mlx5_ib]
[ 347.619984] auxiliary_bus_probe+0x3e/0x90
[ 347.620448] really_probe+0xc5/0x3a0
[ 347.620857] __driver_probe_device+0x80/0x160
[ 347.621325] driver_probe_device+0x1e/0x90
[ 347.621770] __driver_attach+0xec/0x1c0
[ 347.622213] ? __device_attach_driver+0x100/0x100
[ 347.622724] bus_for_each_dev+0x71/0xc0
[ 347.623151] bus_add_driver+0xed/0x240
[ 347.623570] driver_register+0x58/0x100
[ 347.623998] __auxiliary_driver_register+0x6a/0xc0
[ 347.624499] ? driver_register+0xae/0x100
[ 347.624940] ? 0xffffffffa0893000
[ 347.625329] mlx5_ib_init+0x16a/0x1e0 [mlx5_ib]
[ 347.625845] do_one_initcall+0x4a/0x2a0
[ 347.626273] ? gcov_event+0x2e2/0x3a0
[ 347.626706] do_init_module+0x8a/0x260
[ 347.627126] init_module_from_file+0x8b/0xd0
[ 347.627596] __x64_sys_finit_module+0x1ca/0x2f0
[ 347.628089] do_syscall_64+0x4c/0x100 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix NULL pointer dereference in mt7996_mcu_sta_bfer_he
Fix the NULL pointer dereference in mt7996_mcu_sta_bfer_he
routine adding an sta interface to the mt7996 driver.
Found by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: check discard support for conventional zones
As the helper function f2fs_bdev_support_discard() shows, f2fs checks if
the target block devices support discard by calling
bdev_max_discard_sectors() and bdev_is_zoned(). This check works well
for most cases, but it does not work for conventional zones on zoned
block devices. F2fs assumes that zoned block devices support discard,
and calls __submit_discard_cmd(). When __submit_discard_cmd() is called
for sequential write required zones, it works fine since
__submit_discard_cmd() issues zone reset commands instead of discard
commands. However, when __submit_discard_cmd() is called for
conventional zones, __blkdev_issue_discard() is called even when the
devices do not support discard.
The inappropriate __blkdev_issue_discard() call was not a problem before
the commit 30f1e7241422 ("block: move discard checks into the ioctl
handler") because __blkdev_issue_discard() checked if the target devices
support discard or not. If not, it returned EOPNOTSUPP. After the
commit, __blkdev_issue_discard() no longer checks it. It always returns
zero and sets NULL to the given bio pointer. This NULL pointer triggers
f2fs_bug_on() in __submit_discard_cmd(). The BUG is recreated with the
commands below at the umount step, where /dev/nullb0 is a zoned null_blk
with 5GB total size, 128MB zone size and 10 conventional zones.
$ mkfs.f2fs -f -m /dev/nullb0
$ mount /dev/nullb0 /mnt
$ for ((i=0;i<5;i++)); do dd if=/dev/zero of=/mnt/test bs=65536 count=1600 conv=fsync; done
$ umount /mnt
To fix the BUG, avoid the inappropriate __blkdev_issue_discard() call.
When discard is requested for conventional zones, check if the device
supports discard or not. If not, return EOPNOTSUPP. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change
When disabling wifi mt7921_ipv6_addr_change() is called as a notifier.
At this point mvif->phy is already NULL so we cannot use it here. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices
The probe() function is only used for DP83822 and DP83826 PHY,
leaving the private data pointer uninitialized for the DP83825 models
which causes a NULL pointer dereference in the recently introduced/changed
functions dp8382x_config_init() and dp83822_set_wol().
Add the dp8382x_probe() function, so all PHY models will have a valid
private data pointer to fix this issue and also prevent similar issues
in the future. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Avoid race between dcn10_set_drr() and dc_state_destruct()
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn10_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn10_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn10_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
(cherry picked from commit a3cc326a43bdc48fbdf53443e1027a03e309b643) |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Require drivers to supply the cache_invalidate_user ops
If drivers don't do this then iommufd will oops invalidation ioctls with
something like:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000086000004
EC = 0x21: IABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101059000
[0000000000000000] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 371 Comm: qemu-system-aar Not tainted 6.8.0-rc7-gde77230ac23a #9
Hardware name: linux,dummy-virt (DT)
pstate: 81400809 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=-c)
pc : 0x0
lr : iommufd_hwpt_invalidate+0xa4/0x204
sp : ffff800080f3bcc0
x29: ffff800080f3bcf0 x28: ffff0000c369b300 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
x23: 0000000000000000 x22: 00000000c1e334a0 x21: ffff0000c1e334a0
x20: ffff800080f3bd38 x19: ffff800080f3bd58 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8240d6d8
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000001000000002 x7 : 0000fffeac1ec950 x6 : 0000000000000000
x5 : ffff800080f3bd78 x4 : 0000000000000003 x3 : 0000000000000002
x2 : 0000000000000000 x1 : ffff800080f3bcc8 x0 : ffff0000c6034d80
Call trace:
0x0
iommufd_fops_ioctl+0x154/0x274
__arm64_sys_ioctl+0xac/0xf0
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xb4
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x190/0x194
All existing drivers implement this op for nesting, this is mostly a
bisection aid. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards harder
Since commit 13f58267cda3 ("ASoC: soc.h: don't create dummy Component
via COMP_DUMMY()") dummy codecs declared like this:
SND_SOC_DAILINK_DEF(dummy,
DAILINK_COMP_ARRAY(COMP_DUMMY()));
expand to:
static struct snd_soc_dai_link_component dummy[] = {
};
Which means that dummy is a zero sized array and thus dais[i].codecs should
not be dereferenced *at all* since it points to the address of the next
variable stored in the data section as the "dummy" variable has an address
but no size, so even dereferencing dais[0] is already an out of bounds
array reference.
Which means that the if (dais[i].codecs->name) check added in
commit 7d99a70b6595 ("ASoC: Intel: Boards: Fix NULL pointer deref
in BYT/CHT boards") relies on that the part of the next variable which
the name member maps to just happens to be NULL.
Which apparently so far it usually is, except when it isn't
and then it results in crashes like this one:
[ 28.795659] BUG: unable to handle page fault for address: 0000000000030011
...
[ 28.795780] Call Trace:
[ 28.795787] <TASK>
...
[ 28.795862] ? strcmp+0x18/0x40
[ 28.795872] 0xffffffffc150c605
[ 28.795887] platform_probe+0x40/0xa0
...
[ 28.795979] ? __pfx_init_module+0x10/0x10 [snd_soc_sst_bytcr_wm5102]
Really fix things this time around by checking dais.num_codecs != 0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check UnboundedRequestEnabled's value
CalculateSwathAndDETConfiguration_params_st's UnboundedRequestEnabled
is a pointer (i.e. dml_bool_t *UnboundedRequestEnabled), and thus
if (p->UnboundedRequestEnabled) checks its address, not bool value.
This fixes 1 REVERSE_INULL issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: intel: Add check devm_kasprintf() returned value
intel_spi_populate_chip() use devm_kasprintf() to set pdata->name.
This can return a NULL pointer on failure but this returned value
is not checked. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (hp-wmi-sensors) Check if WMI event data exists
The BIOS can choose to return no event data in response to a
WMI event, so the ACPI object passed to the WMI notify handler
can be NULL.
Check for such a situation and ignore the event in such a case. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: usb: schedule rx work after everything is set up
Right now it's possible to hit NULL pointer dereference in
rtw_rx_fill_rx_status on hw object and/or its fields because
initialization routine can start getting USB replies before
rtw_dev is fully setup.
The stack trace looks like this:
rtw_rx_fill_rx_status
rtw8821c_query_rx_desc
rtw_usb_rx_handler
...
queue_work
rtw_usb_read_port_complete
...
usb_submit_urb
rtw_usb_rx_resubmit
rtw_usb_init_rx
rtw_usb_probe
So while we do the async stuff rtw_usb_probe continues and calls
rtw_register_hw, which does all kinds of initialization (e.g.
via ieee80211_register_hw) that rtw_rx_fill_rx_status relies on.
Fix this by moving the first usb_submit_urb after everything
is set up.
For me, this bug manifested as:
[ 8.893177] rtw_8821cu 1-1:1.2: band wrong, packet dropped
[ 8.910904] rtw_8821cu 1-1:1.2: hw->conf.chandef.chan NULL in rtw_rx_fill_rx_status
because I'm using Larry's backport of rtw88 driver with the NULL
checks in rtw_rx_fill_rx_status. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix Null pointer dereference in btnxpuart_flush()
This adds a check before freeing the rx->skb in flush and close
functions to handle the kernel crash seen while removing driver after FW
download fails or before FW download completes.
dmesg log:
[ 54.634586] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080
[ 54.643398] Mem abort info:
[ 54.646204] ESR = 0x0000000096000004
[ 54.649964] EC = 0x25: DABT (current EL), IL = 32 bits
[ 54.655286] SET = 0, FnV = 0
[ 54.658348] EA = 0, S1PTW = 0
[ 54.661498] FSC = 0x04: level 0 translation fault
[ 54.666391] Data abort info:
[ 54.669273] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 54.674768] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 54.674771] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 54.674775] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048860000
[ 54.674780] [0000000000000080] pgd=0000000000000000, p4d=0000000000000000
[ 54.703880] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 54.710152] Modules linked in: btnxpuart(-) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_micfil snd_soc_fsl_spdif snd_soc_fsl_sai snd_soc_fsl_utils imx_pcm_dma gpio_ir_recv rc_core sch_fq_codel fuse
[ 54.744357] CPU: 3 PID: 72 Comm: kworker/u9:0 Not tainted 6.6.3-otbr-g128004619037 #2
[ 54.744364] Hardware name: FSL i.MX8MM EVK board (DT)
[ 54.744368] Workqueue: hci0 hci_power_on
[ 54.757244] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 54.757249] pc : kfree_skb_reason+0x18/0xb0
[ 54.772299] lr : btnxpuart_flush+0x40/0x58 [btnxpuart]
[ 54.782921] sp : ffff8000805ebca0
[ 54.782923] x29: ffff8000805ebca0 x28: ffffa5c6cf1869c0 x27: ffffa5c6cf186000
[ 54.782931] x26: ffff377b84852400 x25: ffff377b848523c0 x24: ffff377b845e7230
[ 54.782938] x23: ffffa5c6ce8dbe08 x22: ffffa5c6ceb65410 x21: 00000000ffffff92
[ 54.782945] x20: ffffa5c6ce8dbe98 x19: ffffffffffffffac x18: ffffffffffffffff
[ 54.807651] x17: 0000000000000000 x16: ffffa5c6ce2824ec x15: ffff8001005eb857
[ 54.821917] x14: 0000000000000000 x13: ffffa5c6cf1a02e0 x12: 0000000000000642
[ 54.821924] x11: 0000000000000040 x10: ffffa5c6cf19d690 x9 : ffffa5c6cf19d688
[ 54.821931] x8 : ffff377b86000028 x7 : 0000000000000000 x6 : 0000000000000000
[ 54.821938] x5 : ffff377b86000000 x4 : 0000000000000000 x3 : 0000000000000000
[ 54.843331] x2 : 0000000000000000 x1 : 0000000000000002 x0 : ffffffffffffffac
[ 54.857599] Call trace:
[ 54.857601] kfree_skb_reason+0x18/0xb0
[ 54.863878] btnxpuart_flush+0x40/0x58 [btnxpuart]
[ 54.863888] hci_dev_open_sync+0x3a8/0xa04
[ 54.872773] hci_power_on+0x54/0x2e4
[ 54.881832] process_one_work+0x138/0x260
[ 54.881842] worker_thread+0x32c/0x438
[ 54.881847] kthread+0x118/0x11c
[ 54.881853] ret_from_fork+0x10/0x20
[ 54.896406] Code: a9be7bfd 910003fd f9000bf3 aa0003f3 (b940d400)
[ 54.896410] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: pmic_glink: Fix race during initialization
As pointed out by Stephen Boyd it is possible that during initialization
of the pmic_glink child drivers, the protection-domain notifiers fires,
and the associated work is scheduled, before the client registration
returns and as a result the local "client" pointer has been initialized.
The outcome of this is a NULL pointer dereference as the "client"
pointer is blindly dereferenced.
Timeline provided by Stephen:
CPU0 CPU1
---- ----
ucsi->client = NULL;
devm_pmic_glink_register_client()
client->pdr_notify(client->priv, pg->client_state)
pmic_glink_ucsi_pdr_notify()
schedule_work(&ucsi->register_work)
<schedule away>
pmic_glink_ucsi_register()
ucsi_register()
pmic_glink_ucsi_read_version()
pmic_glink_ucsi_read()
pmic_glink_ucsi_read()
pmic_glink_send(ucsi->client)
<client is NULL BAD>
ucsi->client = client // Too late!
This code is identical across the altmode, battery manager and usci
child drivers.
Resolve this by splitting the allocation of the "client" object and the
registration thereof into two operations.
This only happens if the protection domain registry is populated at the
time of registration, which by the introduction of commit '1ebcde047c54
("soc: qcom: add pd-mapper implementation")' became much more likely. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: prevent panic for nfsv4.0 closed files in nfs4_show_open
Prior to commit 3f29cc82a84c ("nfsd: split sc_status out of
sc_type") states_show() relied on sc_type field to be of valid
type before calling into a subfunction to show content of a
particular stateid. From that commit, we split the validity of
the stateid into sc_status and no longer changed sc_type to 0
while unhashing the stateid. This resulted in kernel oopsing
for nfsv4.0 opens that stay around and in nfs4_show_open()
would derefence sc_file which was NULL.
Instead, for closed open stateids forgo displaying information
that relies of having a valid sc_file.
To reproduce: mount the server with 4.0, read and close
a file and then on the server cat /proc/fs/nfsd/clients/2/states
[ 513.590804] Call trace:
[ 513.590925] _raw_spin_lock+0xcc/0x160
[ 513.591119] nfs4_show_open+0x78/0x2c0 [nfsd]
[ 513.591412] states_show+0x44c/0x488 [nfsd]
[ 513.591681] seq_read_iter+0x5d8/0x760
[ 513.591896] seq_read+0x188/0x208
[ 513.592075] vfs_read+0x148/0x470
[ 513.592241] ksys_read+0xcc/0x178 |
