Search Results (7213 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-14626 1 Nousresearch 1 Hermes-agent 2026-07-07 4.3 Medium
A weakness has been identified in NousResearch hermes-agent up to 2026.4.30. The impacted element is the function AIAgent.run_conversation of the file run_agent.py of the component HTTP API. This manipulation of the argument todos causes denial of service. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2026-13708 1 Tonyc 1 Imager::file::jpeg 2026-07-06 7.5 High
Imager::File::JPEG versions before 1.003 for Perl leak heap memory when reading a JPEG with repeated APP13 markers in i_readjpeg_wiol. i_readjpeg_wiol walks the marker list libjpeg returns and, for each APP13 marker, allocates a new buffer with *iptc_itext = mymalloc(...) and overwrites the previous pointer without freeing it. Only the final payload is later turned into a Perl scalar and freed, so a JPEG with N such markers leaks the first N-1 payloads on every read. In a long-lived process, such as an upload or thumbnailing service, repeated reads accumulate these leaks and exhaust available memory, a denial of service. The same handler ships bundled in the Imager distribution, where versions before 1.032 are affected and the fix ships in 1.032.
CVE-2026-14624 1 Omec-project 1 Amf 2026-07-06 4.3 Medium
A vulnerability was identified in omec-project amf up to 2.0.2/2.1.1. Impacted is an unknown function of the file /go/src/amf/ngap/handler.go of the component NGSetupRequest Handler. The manipulation leads to denial of service. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The identifier of the patch is 34bc6724acc97dba1f8691e586da95b042cb612d. To fix this issue, it is recommended to deploy a patch.
CVE-2026-40140 1 Beyondtrust 2 Privileged Remote Access, Remote Support 2026-07-06 N/A
BeyondTrust Remote Support and Privileged Remote Access contain a high-severity pre-authentication vulnerability in the network communication subsystem. Insufficient validation of client-supplied input may allow an unauthenticated remote attacker to trigger a denial-of-service condition affecting appliance availability.
CVE-2026-14618 1 Open5gs 1 Open5gs 2026-07-06 4.3 Medium
A vulnerability was detected in Open5GS up to 2.7.7. Affected by this vulnerability is the function amf_nnrf_handle_nf_discover of the file src/amf/nnrf-handler.c of the component AMF. The manipulation results in denial of service. The attack may be launched remotely. The exploit is now public and may be used. The patch is identified as fb5f67703de0213fb9c6e6ef3b48b6c1707e9503. It is best practice to apply a patch to resolve this issue.
CVE-2026-14650 1 Connorskees 1 Grass 2026-07-06 3.3 Low
A flaw has been found in connorskees grass up to 0.13.4. The affected element is the function grass_compiler::raw_to_parse_error of the component UTF-8 Character Handler. Executing a manipulation can lead to denial of service. The attack is restricted to local execution. The exploit has been published and may be used. In Issue #117 with similar structure the project maintainer explains: "DoS vulnerabilities are generally fine in Sass compilers -- they are trivially possible with recursive functions, infinite loops, nested mixins, etc. The description here is wrong. Compile time is not expected to be linear relative to the input, and the @extend algorithm is definitionally exponential."
CVE-2026-14651 1 Connorskees 1 Grass 2026-07-06 3.3 Low
A vulnerability has been found in connorskees grass up to 0.13.4. The impacted element is the function grass_compiler::selector::extend/grass_compiler::evaluate::visitor. The manipulation leads to denial of service. The attack must be carried out locally. The exploit has been disclosed to the public and may be used. The project maintainer explains: "DoS vulnerabilities are generally fine in Sass compilers -- they are trivially possible with recursive functions, infinite loops, nested mixins, etc. The description here is wrong. Compile time is not expected to be linear relative to the input, and the @extend algorithm is definitionally exponential."
CVE-2026-59094 1 Pathwaycom 1 Pathway 2026-07-06 7.5 High
Pathway through 0.31.1, fixed in commit d09722e, document store applies a caller-supplied glob pattern to indexed document paths using a hand-written recursive matcher that branches two ways on each ** token without memoization, giving exponential worst-case complexity. The filepath_globpattern value is taken from the body of the unauthenticated HTTP endpoints /v1/retrieve, /v1/inputs and /v2/answer and compiled into a filter evaluated once per indexed document, with no length or **-count limit. A remote unauthenticated attacker can submit a short pattern containing many ** tokens to consume CPU for tens of seconds per request, and a small number of requests denies service.
CVE-2026-14790 1 Gpac 1 Gpac 2026-07-06 3.3 Low
A flaw has been found in GPAC 26.02.0. This affects the function nhmldump_send_frame of the file src/filters/write_nhml.c of the component Media File Handler. Executing a manipulation can lead to null pointer dereference. The attack requires local access. The exploit has been published and may be used. This patch is called bd1d94e70e3bef364c07c5a1d94eca5c9f56e160. A patch should be applied to remediate this issue. The project explains: "I would consider most of these more as bugs than vulns but anyway they're good to fix".
CVE-2026-14623 1 Omec-project 1 Amf 2026-07-06 4.3 Medium
A vulnerability was determined in omec-project amf up to 2.1.1. This issue affects the function RRCInactiveTransitionReport of the component NGAP Message Handler. Executing a manipulation can lead to denial of service. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. This patch is called 34bc6724acc97dba1f8691e586da95b042cb612d. A patch should be applied to remediate this issue.
CVE-2026-14629 1 Rt-thread 1 Rt-thread 2026-07-06 4.3 Medium
A flaw has been found in RT-Thread up to 5.2.2. Affected is the function read/write/sys_ioctl of the file components/lwp/lwp_syscall.c of the component Parameter Handler. Executing a manipulation can lead to divide by zero. The attack may be launched remotely. The exploit has been published and may be used. The pull request to fix this issue awaits acceptance.
CVE-2026-24012 1 Apache 1 Iotdb 2026-07-06 7.5 High
Uncontrolled Resource Consumption vulnerability in Apache IoTDB.  Some interface fails to impose reasonable limits on the time span and aggregation interval of the query. An attacker can construct a request with extreme parameters (e.g., a very large time range combined with a minimal interval). This forces the DataNode to build an enormous result set in memory, which exhausts the Java heap and causes the DataNode process to crash. This issue affects Apache IoTDB: from 1.3.3 before 2.0.8. Users are recommended to upgrade to version 2.0.8, which fixes the issue.
CVE-2026-14801 1 Gpac 1 Gpac 2026-07-06 3.3 Low
A security vulnerability has been detected in GPAC 26.03-DEV-rev342-g80071f700-master. The impacted element is the function txtin_probe_duration of the file src/filters/load_text.c of the component TeXML File Handler. Such manipulation of the argument txml_timescale leads to divide by zero. An attack has to be approached locally. The name of the patch is 86a5191f2e750c767253e27ed6cfd6d547afebc2. A patch should be applied to remediate this issue.
CVE-2026-58226 1 Elixir-mint 1 Hpax 2026-07-06 N/A
Inefficient Algorithmic Complexity vulnerability in elixir-mint hpax allows unauthenticated denial-of-service via unbounded HPACK integer decoding. hpax decodes HPACK variable-length integers with no upper bound on the decoded value or the number of continuation octets. 'Elixir.HPAX.Types':decode_remaining_integer/3 accumulates the integer as int + (value <<< m), shifting by 7 more bits for each continuation octet and stopping only on a terminating octet or truncated input, never because the integer grew too large. Because BEAM integers are arbitrary precision, a run of N continuation octets builds an O(N)-bit bignum and re-adds into an ever-larger bignum on each step, so the total decoding cost is superlinear (about O(N^2)). An unauthenticated attacker who can send an HTTP/2 header block to a server using this decoder (reached through the 'Elixir.HPAX':decode/2 entry point) can supply a small header block that forces a large, attacker-controlled amount of CPU (and transient memory), a denial-of-service amplification. This issue affects hpax from 0.1.1 before 1.0.4.
CVE-2026-36478 1 Technitium 1 Dns Server 2026-07-05 7.5 High
An issue in Technitium DNS Server v.14.3 and before allows a remote attacker to cause a denial of service via the DnsServerApp.exe, DnsServerApp.dll, TechnitiumLibrary.Net/Dns/DnsClient.cs components
CVE-2026-43355 1 Linux 1 Linux Kernel 2026-07-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: iio: light: bh1780: fix PM runtime leak on error path Move pm_runtime_put_autosuspend() before the error check to ensure the PM runtime reference count is always decremented after pm_runtime_get_sync(), regardless of whether the read operation succeeds or fails.
CVE-2026-31732 1 Linux 1 Linux Kernel 2026-07-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: gpio: Fix resource leaks on errors in gpiochip_add_data_with_key() Since commit aab5c6f20023 ("gpio: set device type for GPIO chips"), `gdev->dev.release` is unset. As a result, the reference count to `gdev->dev` isn't dropped on the error handling paths. Drop the reference on errors. Also reorder the instructions to make the error handling simpler. Now gpiochip_add_data_with_key() roughly looks like: >>> Some memory allocation. Go to ERR ZONE 1 on errors. >>> device_initialize(). gpiodev_release() takes over the responsibility for freeing the resources of `gdev->dev`. The subsequent error handling paths shouldn't go through ERR ZONE 1 again which leads to double free. >>> Some initialization mainly on `gdev`. >>> The rest of initialization. Go to ERR ZONE 2 on errors. >>> Chip registration success and exit. >>> ERR ZONE 2. gpio_device_put() and exit. >>> ERR ZONE 1.
CVE-2022-49803 1 Linux 1 Linux Kernel 2026-07-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: netdevsim: Fix memory leak of nsim_dev->fa_cookie kmemleak reports this issue: unreferenced object 0xffff8881bac872d0 (size 8): comm "sh", pid 58603, jiffies 4481524462 (age 68.065s) hex dump (first 8 bytes): 04 00 00 00 de ad be ef ........ backtrace: [<00000000c80b8577>] __kmalloc+0x49/0x150 [<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim] [<0000000093d78e77>] full_proxy_write+0xf3/0x180 [<000000005a662c16>] vfs_write+0x1c5/0xaf0 [<000000007aabf84a>] ksys_write+0xed/0x1c0 [<000000005f1d2e47>] do_syscall_64+0x3b/0x90 [<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue occurs in the following scenarios: nsim_dev_trap_fa_cookie_write() kmalloc() fa_cookie nsim_dev->fa_cookie = fa_cookie .. nsim_drv_remove() The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove().
CVE-2026-47262 2 Containerd, Redhat 2 Containerd, Hummingbird 2026-07-03 6.5 Medium
containerd is an open-source container runtime. Versions prior to 1.7.33, 2.0.10, 2.1.9, 2.2.5 and 2.3.2, contain a vulnerability that allows a maliciously crafted image to cause a Denial of Service (DoS) condition. When creating a container from this image, memory exhaustion occurs, leading to an Out Of Memory (OOM) kill of the containerd process. This renders the container runtime API unavailable and can disrupt clients such as the Docker Engine or Kubernetes control-plane components. This issue has been fixed in versions 1.7.33, 2.0.10, 2.1.9, 2.2.5 and 2.3.2.
CVE-2026-9563 1 Eclipse 1 Parsson 2026-07-03 7.5 High
In Eclipse Parsson published Maven Central artifacts before version 1.1.8, the JSON parser did not enforce a default maximum on the number of characters consumed while parsing a single JSON document. Applications that parse attacker- controlled JSON can be forced to consume excessive CPU and memory by processing very large documents, including large arrays, objects, strings, numbers, whitespace, or nested structures, resulting in a denial of service. Eclipse Parsson 1.1.8 introduces a configurable maximum parsing limit with a default limit of 15 million parser-consumed characters.