| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Hulumi is an open-source toolkit that ships secure-by-default cloud and platform infrastructure components for Pulumi. Prior to version 1.4.0, consumers using AccountFoundation could ship an AWS account whose CloudTrail / Config audit logs were deletable by any S3-delete-capable principal — while believing the startup-hardened tier guaranteed tamper-resistance. Sandbox-tier deployments had no audit immutability at all (defects 1 and 3 compounded). This issue has been patched in version 1.4.0. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Compute the correct max length of the in-GHCB scratch area
When setting the length of the GHCB scratch area, and the area is in the
GHCB shared buffer, set the effective length of the scratch area to the max
possible size given the start of the guest-provided pointer, and the end of
the shared buffer.
The code was "fine" when first introduced, as KVM doesn't consult the
length of the buffer when emulating MMIO, because the passed in @len always
specifies the *max* size required. But for PSC requests, the incoming @len
is just the minimum length (to process the header), and KVM needs to know
the full size of the scratch area to avoid buffer overflows (spoiler alert).
Opportunistically rename @len => @min_len to better reflect its role. |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: line-display: fix OOB read on zero-length message_store()
linedisp_display() unconditionally reads msg[count - 1] before
checking whether count is zero, so a write of zero bytes to the
message sysfs attribute hits msg[-1]:
write(fd, "", 0);
-> message_store(..., buf, count=0)
-> linedisp_display(linedisp, buf, count=0)
-> msg[count - 1] == '\n' ; OOB read
The kernfs write buffer for that store is a 1-byte allocation
(kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0),
so msg[-1] is a 1-byte read before the slab object. On a
KASAN-enabled kernel this trips an out-of-bounds report and
panics; on stock kernels it silently reads adjacent slab data
and, if that byte happens to be '\n', the following count--
wraps ssize_t 0 to -1 and is then passed to kmemdup_nul().
linedisp_display() is reached from the message_store() sysfs
callback (drivers/auxdisplay/line-display.c message attribute,
mode 0644) and from the in-tree initial-message setup with
count == -1, so the OOB path is only userspace-triggerable via
zero-byte writes; vfs_write() does not short-circuit on
count == 0 and kernfs_fop_write_iter() dispatches the store
callback regardless.
Guard the trailing-newline trim with a count check. The
existing if (!count) block then takes the clear-display path
unchanged.
Affects every auxdisplay driver that registers via
linedisp_register() / linedisp_attach(): ht16k33, max6959,
img-ascii-lcd, seg-led-gpio. |
| In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, when downstream DNS-over-QUIC (DoQ) is enabled, the first two bidirectional streams on a new QUIC connection (stream_id 0 and 4) bypass the per-stream 'quic-size' gate entirely, and large input buffers are allocated later, after only the 2-byte length prefix has been received from the initial streams. As a result, a remote client can make Unbound exceed the configured 'quic-size' limit with low-cost input. Using only one connection and two streams, each sending a declared 65535-byte length prefix and then holding the streams open, a client can already trivially make Unbound roughly allocate double that amount. This is a remote availability issue / memory-accounting bypass in the downstream DoQ implementation that leads to denial of service for new DoQ clients. This vulnerability needs Unbound to be compiled with DoQ support ('--with-libngtcp2') and the 'quic-port' to be configured for the listening interfaces. |
| In Unbound 1.9.0 up to and including 1.25.1, when a DNSCrypt query is received over TCP, the routine that encrypts the reply in place fails to bound the reply length against the destination buffer size. The size clamp that protects the UDP path is not applied on the TCP path, so a reply larger than 65504 bytes is shifted forward by 48 bytes inside a buffer of capacity equal to 'msg-buffer-size', writing past the end of the heap allocation. A single malicious encrypted query crashes the resolver and lead to denial of service. This vulnerability needs Unbound to be compiled with DNSCrypt support ('--enable-dnscrypt') and the 'dnscrypt:' clause to be configured and enabled for the listening interfaces. |
| In NLnet Labs Unbound 1.13.2 up to and including 1.25.1, stub or forward zones where the name is below an intermediate labed below a DNSSEC signed zone could be shadowed by the intermediate label's secure NXDOMAIN answer from the parent. This is caused by an off-by-one error in 'harden-below-nxdomain' logic; enabled by default. It effectively bypasses the configuration and the configured stub/forward zone is never contacted. 'harden-below-nxdomain' does an upward DNS cache walk together with a delegation point guard that does not allow NXDOMAIN synthesis above stub/forward zones. The guard tests the domain name but before stripping a label. This results in an iteration where the domain name equals the configured stub/forward zone apex that passes the guard, strips one more label, and probes the cache at the apex's immediate public parent. If that parent has a cached DNSSEC-secure NXDOMAIN, which it will for any private namespace nested two or more labels under a signed public name, the walk returns it and the configured stub/forward upstream is never contacted. This can only be triggered by the query for the intermediate label (between the stub/forward apex and the DNSSEC parent zone). |
| In NLnet Labs Unbound up to and including version 1.25.1, when 'unwanted-reply-threshold' is enabled (set to any value greater than zero), glue records of 0.0.0.0/::0 can short-circuit Unbound, on systems that can direct such traffic, by issuing DNS queries and receiving seemingly unwanted replies since the remote IP does not match the original source IP of 0.0.0.0/::0. This behavior keeps on looping for the glue records and pushing the counter to the configured 'unwanted-reply-threshold' that triggers a defensive cache clear. A malicious actor who controls a delegation that returns in-bailiwick glue of 0.0.0.0/::0 can drive the counter to the limit of 'unwanted-reply-threshold' to the threshold and trigger a cache clean of the message and rrset caches; at will, indefinitely, without sending a single spoofed packet. The iterator uses the 0.0.0.0/::0 glue, and a system that can route this (e.g., Linux kernel routes the datagram over loopback), Unbound's own listener answers from 127.0.0.1. Because of the mismatch of 0.0.0.0 and 127.0.0.1, in this example, Unbound accounts the reply as an unwanted (probably spoofed) answer. The counter resets to zero on every cache flush, so the attack loops forever. |
| In NLnet Labs Unbound 1.25.0 up to and including 1.25.1, a fix that makes the 'respip' and 'dns64' modules work together, creates a shallow copy of the view name in effect that could lead to memory corruption if the owner of the original view name is jostled out when Unbound is under pressure. Unbound needs to be configured with one of 'respip'/'rpz' modules, together with a module that can attach subqueries (respip CNAME redirection, dns64, subnetcache) and a configured 'access-control-view' while Unbound is under pressure so that joslte logic kicks in and starts dropping slow queries. The subquery is getting a shallow copy of the view name and if the super query which owns the view name is jostled out, memory corruption can occur. Likelihood of a crash is low, since it relies heavily on the underlying memory allocator and the memory layout. Debug memory builds (e.g., ASAN) that catch the free terminate the server. |
| In NLnet Labs Unbound 1.6.0 up to and including 1.25.1, the 'view_local_data' and 'view_local_datas' commands of 'unbound-control' create a bare local zones tree for an already configured named view when the view is configured with no local data to begin with. However, the creation through the control interface omits adding the default-protected zones (e.g., RFC 1918 reverse, AS112 zones, .onion, .localhost). Once the local zone tree exists without the defaults, every query for a default-protected name from a client mapped to that view escapes to the public DNS via the iterator instead of being answered locally, bypassing local policy expectations. |
| libheif is a HEIF and AVIF file format decoder and encoder. Versions 1.19.0 through 1.21.2 have a heap OOB read in ImageItem_Grid::decode_grid_tile via irot-induced tile-coordinate underflow. Version 1.22.0 fixes the issue. |
| @fastify/static evaluates the allowedPath callback before normalizing dot segments and duplicate path separators in the pathname used for file resolution. Versions up to and including 10.1.1 are affected. An unauthenticated attacker can bypass allowedPath restrictions by requesting equivalent non-canonical pathnames, causing files that were intended to be denied to be served anyway. The bypass does not allow access outside the configured static root by itself, it defeats path-based filtering only. The issue is patched in @fastify/static 10.1.2. |
| A memory corruption issue was addressed with improved memory handling. This issue is fixed in Safari 26.5.2, iOS 26.5.2 and iPadOS 26.5.2, macOS Tahoe 26.5.2, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected process crash. |
| The issue was addressed with improved memory handling. This issue is fixed in Safari 26.5.2, iOS 26.5.2 and iPadOS 26.5.2, macOS Tahoe 26.5.2, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected process crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: eeprom: add more safeties to EEPROM Netlink fallback
The Netlink fallback path for reading module EEPROM
(fallback_set_params()) validates that offset < eeprom_len,
but does not check that offset + length stays within eeprom_len.
The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has
always enforced both bounds:
if (eeprom.offset + eeprom.len > total_len)
return -EINVAL;
This could lead to surprises in both drivers and device FW.
Add the missing offset + length validation to fallback_set_params(),
mirroring the ioctl.
Similarly - ethtool core in general, and ethtool_get_any_eeprom()
in particular tries to zero-init all buffers passed to the drivers
to avoid any extra work of zeroing things out. eeprom_fallback()
uses a plain kmalloc(), change it to zalloc. |
| TOML::XS versions before 0.06 for Perl bundle an unsupported and vulnerable version of tomlc99.
The tomlc99 library is no longer maintained, and has an uncontrolled recursion vulnerability publicly reported in the issue tracker.
Any caller that passes untrusted TOML to from_toml risks a stack overflow from a deeply-nested document.
TOML::XS version 0.06 or later uses the successor tomlc17 library. |
| Incorrect boundary conditions in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
| Sandbox escape due to invalid pointer in the Disability Access APIs component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
| Integer overflow in the Audio/Video component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
| Clickjacking issue in the WebExtensions component in Firefox for Android. This vulnerability was fixed in Firefox 153. |
| Integer overflow in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
