| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| LMDeploy is a toolkit for compressing, deploying, and serving large language models. From 0.12.3 until 0.15.0, _is_safe_url validates remote media URLs with urlparse while requests.Session().get interprets backslashes differently when sending the request. An attacker can provide a URL whose validation hostname appears globally routable but whose request destination resolves to an internal host, bypassing non-global address checks. Applications that accept attacker-controlled remote media URLs can therefore be induced to access internal HTTP services and expose data available from those services. This issue is fixed in version 0.15.0. |
| SIPSorcery is a WebRTC, SIP, and VoIP library for C# and .NET. Prior to 10.0.14, SctpSackChunk.ParseChunk reads the numGapAckBlocks and numDuplicateTSNs fields from an attacker-controlled SCTP SACK chunk without checking that the corresponding entries fit the declared chunk length. A negotiated WebRTC peer can send a checksum-valid malformed SACK chunk that drives the parser beyond the 262144-byte receive buffer. The resulting IndexOutOfRangeException bypasses the recoverable ApplicationException handler in RTCSctpTransport.DoReceive, causing the generic handler to exit the dedicated receive loop and permanently terminate the SCTP association and all data channels. This issue is fixed in 10.0.14. |
| Vulnerability in the Oracle Communications Unified Inventory Management product of Oracle Communications (component: Security). Supported versions that are affected are 7.5.0, 7.5.1, 7.6.0, 7.7.0, 7.8.0 and 8.0.1. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Communications Unified Inventory Management. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Communications Unified Inventory Management accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| After Effects is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| The Forminator Forms WordPress plugin before 1.58.4 does not enforce payment on the server side when a form's configured payment gateway is unavailable, allowing unauthenticated visitors to complete a payment-gated User Registration form without paying and be assigned the form's configured role, up to administrator, after the gateway has been connected and later disconnected. |
| The Contest Gallery WordPress plugin before 34.0.3 does not sanitise the name of files uploaded through its e-commerce sale file-replacement feature, allowing authenticated users with Author-level access and above to write files with an arbitrary name and extension to a web-accessible directory and, by overwriting the directory's protection file through the same flow, achieve Remote Code Execution. |
| Hugging Face Datasets before 5.2.0 contains an insecure deserialization vulnerability that allows attackers to execute arbitrary Python code by crafting a malicious pickle file loaded through the deprecated pandas packaged builder. Attackers can supply a pickle-backed dataset that is processed by Pandas._generate_tables via pandas.read_pickle() without validation, so when a victim calls datasets.load_dataset("pandas", data_files=...), the embedded __reduce__ payload executes code with the victim process's privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Use spin_lock_bh for hn_lock
nvmet_tcp_state_change(), a socket callback that runs in BH context,
can reach handshake_req_cancel() via nvmet_tcp_schedule_release_queue()
and tls_handshake_cancel(). handshake_req_cancel() acquires
hn->hn_lock with plain spin_lock(). If a process-context thread on
the same CPU holds hn->hn_lock when a softirq invokes the cancel path,
the lock attempt deadlocks. This is the only caller that invokes
tls_handshake_cancel() from BH context; every other consumer calls it
from process context.
Deferring the cancel to process context in the NVMe target is not
straightforward: nvmet_tcp_schedule_release_queue() must call
tls_handshake_cancel() atomically with its state transition to
DISCONNECTING. If the cancel were deferred, the handshake completion
callback could fire in the window before the cancel runs, observe the
unexpected state, and return without dropping its kref on the queue.
Reworking that interlock is considerably more invasive than hardening
the handshake lock. Convert all hn->hn_lock acquisitions from
spin_lock/spin_unlock to spin_lock_bh/spin_unlock_bh so the lock is
never taken with softirqs enabled. |
| The Smoove abandoned cart trigger for WooCommerce WordPress plugin before 4.3.6 does not sanitise and escape abandoned-cart data submitted by visitors before outputting it in the admin dashboard, allowing unauthenticated users to perform Stored Cross-Site Scripting attacks against administrators. |
| Incorrect authorization in Permissions in Google Chrome prior to 157.0.8103.38 allowed a remote attacker who had compromised the renderer process to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Uninitialized resource in Skia in Google Chrome prior to 157.0.8103.38 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Buffer overflow in Compositing in Google Chrome prior to 157.0.8103.50 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Type confusion in V8 in Google Chrome prior to 157.0.8103.50 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect
l2cap_chan_connect() tries to ensure there are no more than
L2CAP_ECRED_CONN_SCID_MAX pending ECRED channels, so they fit in the
same L2CAP_ECRED_CONN_REQ that l2cap_ecred_connect() constructs.
However, the check only counts deferred channels. If 6 L2CAP sockets
are connected at the same time in order DDDDND (D=deferred,
N=non-deferred), the last can bump the total to max+1. It results to
one __le16 written out of bounds of the scid array, and an invalid
ECRED_CONN_REQ being sent.
Fix by leaving room for the non-deferred pending ECRED channels in the
counting in l2cap_chan_connect(), so the limit can't be exceeded.
Move counting under same critical section where the channel is added.
Although race conditions involving this appear unreachable, it's easier
to see.
Also add WARN_ON_ONCE check in l2cap_ecred_defer_connect() to make this
less brittle. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix chan mode for LE_CONN_REQ + EXT_FLOWCTL pchan
l2cap_new_connection() sets default value of channel mode to match the
parent channel. l2cap_le_connect_req() left this at the default, and
created L2CAP_MODE_EXT_FLOWCTL channels if listening pchan has that
mode. This causes FLAG_DEFER_SETUP channels to reply to
L2CAP_LE_CONN_REQ with L2CAP_ECRED_CONN_RSP, which is incorrect.
It can also result to stack OOB write (of l2cap_alloc_cid determined
values) in l2cap_ecred_rsp_defer(), as l2cap_le_connect_req() does not
limit maximum number of deferred channels or check for duplicate ident.
Fix by setting chan->mode correctly in l2cap_le_connect_req().
Also check channel mode in l2cap_ecred_rsp_defer(), and do WARN_ON_ONCE
instead of OOB write to make it less brittle. |
| The NXP ENET-QOS Ethernet driver's receive work handler eth_nxp_enet_qos_rx() in drivers/ethernet/eth_nxp_enet_qos hands each processed descriptor back to the DMA by writing desc->read.control = rx_desc_refresh_flags, which sets OWN_FLAG and BUF1_ADDR_VALID_FLAG. RDES0 of a receive descriptor is the DMA buffer address in read format, but the hardware write-back aliases that word with the VLAN tag fields (or, for a context descriptor, the timestamp low word), so it is destroyed on every completion. The success path rewrites desc->read.buf1_addr before re-arming; the four drop paths — errored or non-first descriptor, net_pkt_rx_alloc() failure, invalid descriptor length, and net_pkt_get_frag() failure — did not, re-arming the ring slot with the write-back residue as its DMA target address.
The drop paths are driven entirely by received traffic and need no privilege or special configuration. With the defaults for this driver (CONFIG_NET_BUF_DATA_SIZE of 128 and 16 receive descriptors) a single full-size frame consumes twelve ring slots and twelve K_NO_WAIT fragment allocations, so a short burst of frames sent to the device exhausts the receive pools and reaches the allocation-failure paths; a frame with a receive error, or any frame whose first descriptor was already dropped, reaches the non-first-descriptor path.
Once a slot has been poisoned, the DMA writes the next frame received in that slot to an address derived from the frame's VLAN tag fields rather than to a receive buffer. On the supported MCX SoCs that address falls in flash or reserved space, so the transfer raises a fatal bus error that the driver only logs — there is no reset or recovery path — and reception stops permanently until the device is rebooted; where the write is silently discarded instead, the untouched buffer is later handed to the network stack with a length, delivering stale buffer contents as if they were a received frame. A single triggering event is enough to make the condition persistent, so an attacker able to send traffic to the device can permanently disable its network interface. |
| The Xtensa MMU userspace port never initialized the per-thread page-table pointer thread->arch.ptables during thread setup, while arch_mem_domain_thread_add() in arch/xtensa/core/ptables.c uses a non-NULL value of that field as its "this thread is migrating from another memory domain" predicate. For a thread whose struct k_thread backing memory is not zeroed, the field holds stale data and the kernel takes the migration branch, passing that stale value to reset_region() as the base of a level-1 page table. The equivalent field on x86 is explicitly cleared in z_x86_userspace_prepare_thread() for exactly this reason; the Xtensa port adopted the predicate without the initialization.
The condition is reachable from an unprivileged user-mode thread on a build with CONFIG_XTENSA_MMU, CONFIG_USERSPACE and dynamically allocated kernel objects. k_object_alloc(K_OBJ_THREAD) is a system call and allocates the thread object from the caller's resource pool without zeroing it, and the k_thread_create() verifier accepts such an object while forcing the K_USER option, so the migration branch is taken whenever the recycled heap bytes at that offset are non-zero. Because a user thread can also allocate, fill and free other kernel objects from the same heap, the stale bytes are groomable rather than merely random.
Walking the bogus table in region_map_update() performs an unguarded index into l2_page_tables_counter[], may copy from and write through the attacker-influenceable level-1 base in dup_l2_table_if_needed(), and finally writes a page-table entry through a second pointer read out of that memory — once per page of the new thread's stack. The result is out-of-bounds reads and writes executed in supervisor mode, ranging from an immediate kernel panic (observed as Xtensa EXCAUSE 13 on Intel ADSP DSP firmware with user threads) to corruption of kernel memory and escape from the user-mode sandbox. |
| SAP NetWeaver AS Java EDM Application does not perform an authentication check for certain web service requests. An unauthenticated attacker could send a specially crafted request to retrieve sensitive business information. This results in a high impact on confidentiality. There is no impact on integrity and availability. |
| Hickory-dns from 0.20.1 before 0.26.2 contains a denial of service vulnerability in the hickory-proto SVCB and HTTPS record presentation format parser, which panics on malformed alpn values. Attackers can supply untrusted zone files with unbalanced quotes, consecutive commas, or invalid escapes in alpn parameters to crash parsing processes. |
| Use of uninitialized resource in Windows Hyper-V allows an authorized attacker to elevate privileges locally. |