| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix integer overflow while processing acregmax mount option
User-provided mount parameter acregmax of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix integer overflow while processing acdirmax mount option
User-provided mount parameter acdirmax of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix integer overflow while processing closetimeo mount option
User-provided mount parameter closetimeo of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
vlan: enforce underlying device type
Currently, VLAN devices can be created on top of non-ethernet devices.
Besides the fact that it doesn't make much sense, this also causes a
bug which leaks the address of a kernel function to usermode.
When creating a VLAN device, we initialize GARP (garp_init_applicant)
and MRP (mrp_init_applicant) for the underlying device.
As part of the initialization process, we add the multicast address of
each applicant to the underlying device, by calling dev_mc_add.
__dev_mc_add uses dev->addr_len to determine the length of the new
multicast address.
This causes an out-of-bounds read if dev->addr_len is greater than 6,
since the multicast addresses provided by GARP and MRP are only 6
bytes long.
This behaviour can be reproduced using the following commands:
ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo
ip l set up dev gretest
ip link add link gretest name vlantest type vlan id 100
Then, the following command will display the address of garp_pdu_rcv:
ip maddr show | grep 01:80:c2:00:00:21
Fix the bug by enforcing the type of the underlying device during VLAN
device initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/fair: Fix potential memory corruption in child_cfs_rq_on_list
child_cfs_rq_on_list attempts to convert a 'prev' pointer to a cfs_rq.
This 'prev' pointer can originate from struct rq's leaf_cfs_rq_list,
making the conversion invalid and potentially leading to memory
corruption. Depending on the relative positions of leaf_cfs_rq_list and
the task group (tg) pointer within the struct, this can cause a memory
fault or access garbage data.
The issue arises in list_add_leaf_cfs_rq, where both
cfs_rq->leaf_cfs_rq_list and rq->leaf_cfs_rq_list are added to the same
leaf list. Also, rq->tmp_alone_branch can be set to rq->leaf_cfs_rq_list.
This adds a check `if (prev == &rq->leaf_cfs_rq_list)` after the main
conditional in child_cfs_rq_on_list. This ensures that the container_of
operation will convert a correct cfs_rq struct.
This check is sufficient because only cfs_rqs on the same CPU are added
to the list, so verifying the 'prev' pointer against the current rq's list
head is enough.
Fixes a potential memory corruption issue that due to current struct
layout might not be manifesting as a crash but could lead to unpredictable
behavior when the layout changes. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
KMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The
cause of the issue was that eth_skb_pkt_type() accessed skb's data
that didn't contain an Ethernet header. This occurs when
bpf_prog_test_run_xdp() passes an invalid value as the user_data
argument to bpf_test_init().
Fix this by returning an error when user_data is less than ETH_HLEN in
bpf_test_init(). Additionally, remove the check for "if (user_size >
size)" as it is unnecessary.
[1]
BUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]
BUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165
eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]
eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165
__xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635
xdp_recv_frames net/bpf/test_run.c:272 [inline]
xdp_test_run_batch net/bpf/test_run.c:361 [inline]
bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390
bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318
bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371
__sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777
__do_sys_bpf kernel/bpf/syscall.c:5866 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5864 [inline]
__x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864
x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
free_pages_prepare mm/page_alloc.c:1056 [inline]
free_unref_page+0x156/0x1320 mm/page_alloc.c:2657
__free_pages+0xa3/0x1b0 mm/page_alloc.c:4838
bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline]
ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235
bpf_map_free kernel/bpf/syscall.c:838 [inline]
bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310
worker_thread+0xedf/0x1550 kernel/workqueue.c:3391
kthread+0x535/0x6b0 kernel/kthread.c:389
ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
CPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: pcf85063: fix potential OOB write in PCF85063 NVMEM read
The nvmem interface supports variable buffer sizes, while the regmap
interface operates with fixed-size storage. If an nvmem client uses a
buffer size less than 4 bytes, regmap_read will write out of bounds
as it expects the buffer to point at an unsigned int.
Fix this by using an intermediary unsigned int to hold the value. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: socinfo: Avoid out of bounds read of serial number
On MSM8916 devices, the serial number exposed in sysfs is constant and does
not change across individual devices. It's always:
db410c:/sys/devices/soc0$ cat serial_number
2644893864
The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not
have support for the serial_num field in the socinfo struct. There is an
existing check to avoid exposing the serial number in that case, but it's
not correct: When checking the item_size returned by SMEM, we need to make
sure the *end* of the serial_num is within bounds, instead of comparing
with the *start* offset. The serial_number currently exposed on MSM8916
devices is just an out of bounds read of whatever comes after the socinfo
struct in SMEM.
Fix this by changing offsetof() to offsetofend(), so that the size of the
field is also taken into account. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: fix potential array underflow in ucsi_ccg_sync_control()
The "command" variable can be controlled by the user via debugfs. The
worry is that if con_index is zero then "&uc->ucsi->connector[con_index
- 1]" would be an array underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group
The DisplayPort driver's sysfs nodes may be present to the userspace before
typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that
a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in
hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns
NULL in those cases.
Remove manual sysfs node creation in favor of adding attribute group as
default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is
not used here otherwise the path to the sysfs nodes is no longer compliant
with the ABI. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmscan: fix a bug calling wakeup_kswapd() with a wrong zone index
With numa balancing on, when a numa system is running where a numa node
doesn't have its local memory so it has no managed zones, the following
oops has been observed. It's because wakeup_kswapd() is called with a
wrong zone index, -1. Fixed it by checking the index before calling
wakeup_kswapd().
> BUG: unable to handle page fault for address: 00000000000033f3
> #PF: supervisor read access in kernel mode
> #PF: error_code(0x0000) - not-present page
> PGD 0 P4D 0
> Oops: 0000 [#1] PREEMPT SMP NOPTI
> CPU: 2 PID: 895 Comm: masim Not tainted 6.6.0-dirty #255
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
> rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
> RIP: 0010:wakeup_kswapd (./linux/mm/vmscan.c:7812)
> Code: (omitted)
> RSP: 0000:ffffc90004257d58 EFLAGS: 00010286
> RAX: ffffffffffffffff RBX: ffff88883fff0480 RCX: 0000000000000003
> RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88883fff0480
> RBP: ffffffffffffffff R08: ff0003ffffffffff R09: ffffffffffffffff
> R10: ffff888106c95540 R11: 0000000055555554 R12: 0000000000000003
> R13: 0000000000000000 R14: 0000000000000000 R15: ffff88883fff0940
> FS: 00007fc4b8124740(0000) GS:ffff888827c00000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00000000000033f3 CR3: 000000026cc08004 CR4: 0000000000770ee0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> PKRU: 55555554
> Call Trace:
> <TASK>
> ? __die
> ? page_fault_oops
> ? __pte_offset_map_lock
> ? exc_page_fault
> ? asm_exc_page_fault
> ? wakeup_kswapd
> migrate_misplaced_page
> __handle_mm_fault
> handle_mm_fault
> do_user_addr_fault
> exc_page_fault
> asm_exc_page_fault
> RIP: 0033:0x55b897ba0808
> Code: (omitted)
> RSP: 002b:00007ffeefa821a0 EFLAGS: 00010287
> RAX: 000055b89983acd0 RBX: 00007ffeefa823f8 RCX: 000055b89983acd0
> RDX: 00007fc2f8122010 RSI: 0000000000020000 RDI: 000055b89983acd0
> RBP: 00007ffeefa821a0 R08: 0000000000000037 R09: 0000000000000075
> R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
> R13: 00007ffeefa82410 R14: 000055b897ba5dd8 R15: 00007fc4b8340000
> </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fixed integer types and null check locations
[why]:
issues fixed:
- comparison with wider integer type in loop condition which can cause
infinite loops
- pointer dereference before null check |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/sme: Always exit sme_alloc() early with existing storage
When sme_alloc() is called with existing storage and we are not flushing we
will always allocate new storage, both leaking the existing storage and
corrupting the state. Fix this by separating the checks for flushing and
for existing storage as we do for SVE.
Callers that reallocate (eg, due to changing the vector length) should
call sme_free() themselves. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: Use kernel helpers for hex dumps
Previously, when the driver was printing hex dumps, the buffer was cast
to an 8 byte long and printed using string formatters. If the buffer
size was not a multiple of 8 then a read buffer overflow was possible.
Therefore, create a new ibmvnic function that loops over a buffer and
calls hex_dump_to_buffer instead.
This patch address KASAN reports like the one below:
ibmvnic 30000003 env3: Login Buffer:
ibmvnic 30000003 env3: 01000000af000000
<...>
ibmvnic 30000003 env3: 2e6d62692e736261
ibmvnic 30000003 env3: 65050003006d6f63
==================================================================
BUG: KASAN: slab-out-of-bounds in ibmvnic_login+0xacc/0xffc [ibmvnic]
Read of size 8 at addr c0000001331a9aa8 by task ip/17681
<...>
Allocated by task 17681:
<...>
ibmvnic_login+0x2f0/0xffc [ibmvnic]
ibmvnic_open+0x148/0x308 [ibmvnic]
__dev_open+0x1ac/0x304
<...>
The buggy address is located 168 bytes inside of
allocated 175-byte region [c0000001331a9a00, c0000001331a9aaf)
<...>
=================================================================
ibmvnic 30000003 env3: 000000000033766e |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: Fix possible memory leak in ptp_clock_register()
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff88800906c618 (size 8):
comm "i2c-idt82p33931", pid 4421, jiffies 4294948083 (age 13.188s)
hex dump (first 8 bytes):
70 74 70 30 00 00 00 00 ptp0....
backtrace:
[<00000000312ed458>] __kmalloc_track_caller+0x19f/0x3a0
[<0000000079f6e2ff>] kvasprintf+0xb5/0x150
[<0000000026aae54f>] kvasprintf_const+0x60/0x190
[<00000000f323a5f7>] kobject_set_name_vargs+0x56/0x150
[<000000004e35abdd>] dev_set_name+0xc0/0x100
[<00000000f20cfe25>] ptp_clock_register+0x9f4/0xd30 [ptp]
[<000000008bb9f0de>] idt82p33_probe.cold+0x8b6/0x1561 [ptp_idt82p33]
When posix_clock_register() returns an error, the name allocated
in dev_set_name() will be leaked, the put_device() should be used
to give up the device reference, then the name will be freed in
kobject_cleanup() and other memory will be freed in ptp_clock_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Return CQE error if invalid lkey was supplied
RXE is missing update of WQE status in LOCAL_WRITE failures. This caused
the following kernel panic if someone sent an atomic operation with an
explicitly wrong lkey.
[leonro@vm ~]$ mkt test
test_atomic_invalid_lkey (tests.test_atomic.AtomicTest) ...
WARNING: CPU: 5 PID: 263 at drivers/infiniband/sw/rxe/rxe_comp.c:740 rxe_completer+0x1a6d/0x2e30 [rdma_rxe]
Modules linked in: crc32_generic rdma_rxe ip6_udp_tunnel udp_tunnel rdma_ucm rdma_cm ib_umad ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core ptp pps_core
CPU: 5 PID: 263 Comm: python3 Not tainted 5.13.0-rc1+ #2936
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:rxe_completer+0x1a6d/0x2e30 [rdma_rxe]
Code: 03 0f 8e 65 0e 00 00 3b 93 10 06 00 00 0f 84 82 0a 00 00 4c 89 ff 4c 89 44 24 38 e8 2d 74 a9 e1 4c 8b 44 24 38 e9 1c f5 ff ff <0f> 0b e9 0c e8 ff ff b8 05 00 00 00 41 bf 05 00 00 00 e9 ab e7 ff
RSP: 0018:ffff8880158af090 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888016a78000 RCX: ffffffffa0cf1652
RDX: 1ffff9200004b442 RSI: 0000000000000004 RDI: ffffc9000025a210
RBP: dffffc0000000000 R08: 00000000ffffffea R09: ffff88801617740b
R10: ffffed1002c2ee81 R11: 0000000000000007 R12: ffff88800f3b63e8
R13: ffff888016a78008 R14: ffffc9000025a180 R15: 000000000000000c
FS: 00007f88b622a740(0000) GS:ffff88806d540000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f88b5a1fa10 CR3: 000000000d848004 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
rxe_do_task+0x130/0x230 [rdma_rxe]
rxe_rcv+0xb11/0x1df0 [rdma_rxe]
rxe_loopback+0x157/0x1e0 [rdma_rxe]
rxe_responder+0x5532/0x7620 [rdma_rxe]
rxe_do_task+0x130/0x230 [rdma_rxe]
rxe_rcv+0x9c8/0x1df0 [rdma_rxe]
rxe_loopback+0x157/0x1e0 [rdma_rxe]
rxe_requester+0x1efd/0x58c0 [rdma_rxe]
rxe_do_task+0x130/0x230 [rdma_rxe]
rxe_post_send+0x998/0x1860 [rdma_rxe]
ib_uverbs_post_send+0xd5f/0x1220 [ib_uverbs]
ib_uverbs_write+0x847/0xc80 [ib_uverbs]
vfs_write+0x1c5/0x840
ksys_write+0x176/0x1d0
do_syscall_64+0x3f/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: prevent potential spectre v1 gadget in ip_metrics_convert()
if (!type)
continue;
if (type > RTAX_MAX)
return -EINVAL;
...
metrics[type - 1] = val;
@type being used as an array index, we need to prevent
cpu speculation or risk leaking kernel memory content. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt: Do not read past the end of test names
Test names were being concatenated based on a offset beyond the end of
the first name, which tripped the buffer overflow detection logic:
detected buffer overflow in strnlen
[...]
Call Trace:
bnxt_ethtool_init.cold+0x18/0x18
Refactor struct hwrm_selftest_qlist_output to use an actual array,
and adjust the concatenation to use snprintf() rather than a series of
strncat() calls. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: imx8mm-verdin: Do not power down eth-phy
Currently if suspending using either freeze or memory state, the fec
driver tries to power down the phy which leads to crash of the kernel
and non-responsible kernel with the following call trace:
[ 24.839889 ] Call trace:
[ 24.839892 ] phy_error+0x18/0x60
[ 24.839898 ] kszphy_handle_interrupt+0x6c/0x80
[ 24.839903 ] phy_interrupt+0x20/0x2c
[ 24.839909 ] irq_thread_fn+0x30/0xa0
[ 24.839919 ] irq_thread+0x178/0x2c0
[ 24.839925 ] kthread+0x154/0x160
[ 24.839932 ] ret_from_fork+0x10/0x20
Since there is currently no functionality in the phy subsystem to power
down phys let's just disable the feature of powering-down the ethernet
phy. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix deinitializing VF in error path
If ice_ena_vfs() fails after calling ice_create_vf_entries(), it frees
all VFs without removing them from snapshot PF-VF mailbox list, leading
to list corruption.
Reproducer:
devlink dev eswitch set $PF1_PCI mode switchdev
ip l s $PF1 up
ip l s $PF1 promisc on
sleep 1
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
sleep 1
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
Trace (minimized):
list_add corruption. next->prev should be prev (ffff8882e241c6f0), but was 0000000000000000. (next=ffff888455da1330).
kernel BUG at lib/list_debug.c:29!
RIP: 0010:__list_add_valid_or_report+0xa6/0x100
ice_mbx_init_vf_info+0xa7/0x180 [ice]
ice_initialize_vf_entry+0x1fa/0x250 [ice]
ice_sriov_configure+0x8d7/0x1520 [ice]
? __percpu_ref_switch_mode+0x1b1/0x5d0
? __pfx_ice_sriov_configure+0x10/0x10 [ice]
Sometimes a KASAN report can be seen instead with a similar stack trace:
BUG: KASAN: use-after-free in __list_add_valid_or_report+0xf1/0x100
VFs are added to this list in ice_mbx_init_vf_info(), but only removed
in ice_free_vfs(). Move the removing to ice_free_vf_entries(), which is
also being called in other places where VFs are being removed (including
ice_free_vfs() itself). |
