| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue was discovered in drivers/bluetooth/hci_ldisc.c in the Linux kernel 6.2. In hci_uart_tty_ioctl, there is a race condition between HCIUARTSETPROTO and HCIUARTGETPROTO. HCI_UART_PROTO_SET is set before hu->proto is set. A NULL pointer dereference may occur. |
| A flaw was found in the Linux kernel. Measuring usage of the shared memory does not scale with large shared memory segment counts which could lead to resource exhaustion and DoS. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: cacheinfo: Avoid out-of-bounds write to cacheinfo array
The loop that detects/populates cache information already has a bounds
check on the array size but does not account for cache levels with
separate data/instructions cache. Fix this by incrementing the index
for any populated leaf (instead of any populated level). |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb()
This patch addresses a null-ptr-deref in qt2_process_read_urb() due to
an incorrect bounds check in the following:
if (newport > serial->num_ports) {
dev_err(&port->dev,
"%s - port change to invalid port: %i\n",
__func__, newport);
break;
}
The condition doesn't account for the valid range of the serial->port
buffer, which is from 0 to serial->num_ports - 1. When newport is equal
to serial->num_ports, the assignment of "port" in the
following code is out-of-bounds and NULL:
serial_priv->current_port = newport;
port = serial->port[serial_priv->current_port];
The fix checks if newport is greater than or equal to serial->num_ports
indicating it is out-of-bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx8mp-blk-ctrl: add missing loop break condition
Currently imx8mp_blk_ctrl_remove() will continue the for loop
until an out-of-bounds exception occurs.
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : dev_pm_domain_detach+0x8/0x48
lr : imx8mp_blk_ctrl_shutdown+0x58/0x90
sp : ffffffc084f8bbf0
x29: ffffffc084f8bbf0 x28: ffffff80daf32ac0 x27: 0000000000000000
x26: ffffffc081658d78 x25: 0000000000000001 x24: ffffffc08201b028
x23: ffffff80d0db9490 x22: ffffffc082340a78 x21: 00000000000005b0
x20: ffffff80d19bc180 x19: 000000000000000a x18: ffffffffffffffff
x17: ffffffc080a39e08 x16: ffffffc080a39c98 x15: 4f435f464f006c72
x14: 0000000000000004 x13: ffffff80d0172110 x12: 0000000000000000
x11: ffffff80d0537740 x10: ffffff80d05376c0 x9 : ffffffc0808ed2d8
x8 : ffffffc084f8bab0 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffffff80d19b9420 x4 : fffffffe03466e60 x3 : 0000000080800077
x2 : 0000000000000000 x1 : 0000000000000001 x0 : 0000000000000000
Call trace:
dev_pm_domain_detach+0x8/0x48
platform_shutdown+0x2c/0x48
device_shutdown+0x158/0x268
kernel_restart_prepare+0x40/0x58
kernel_kexec+0x58/0xe8
__do_sys_reboot+0x198/0x258
__arm64_sys_reboot+0x2c/0x40
invoke_syscall+0x5c/0x138
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x38/0xc8
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x190/0x198
Code: 8128c2d0 ffffffc0 aa1e03e9 d503201f |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: ignore unknown extended permissions
When evaluating extended permissions, ignore unknown permissions instead
of calling BUG(). This commit ensures that future permissions can be
added without interfering with older kernels. |
| In the Linux kernel, the following vulnerability has been resolved:
net: restrict SO_REUSEPORT to inet sockets
After blamed commit, crypto sockets could accidentally be destroyed
from RCU call back, as spotted by zyzbot [1].
Trying to acquire a mutex in RCU callback is not allowed.
Restrict SO_REUSEPORT socket option to inet sockets.
v1 of this patch supported TCP, UDP and SCTP sockets,
but fcnal-test.sh test needed RAW and ICMP support.
[1]
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:562
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 24, name: ksoftirqd/1
preempt_count: 100, expected: 0
RCU nest depth: 0, expected: 0
1 lock held by ksoftirqd/1/24:
#0: ffffffff8e937ba0 (rcu_callback){....}-{0:0}, at: rcu_lock_acquire include/linux/rcupdate.h:337 [inline]
#0: ffffffff8e937ba0 (rcu_callback){....}-{0:0}, at: rcu_do_batch kernel/rcu/tree.c:2561 [inline]
#0: ffffffff8e937ba0 (rcu_callback){....}-{0:0}, at: rcu_core+0xa37/0x17a0 kernel/rcu/tree.c:2823
Preemption disabled at:
[<ffffffff8161c8c8>] softirq_handle_begin kernel/softirq.c:402 [inline]
[<ffffffff8161c8c8>] handle_softirqs+0x128/0x9b0 kernel/softirq.c:537
CPU: 1 UID: 0 PID: 24 Comm: ksoftirqd/1 Not tainted 6.13.0-rc3-syzkaller-00174-ga024e377efed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
__might_resched+0x5d4/0x780 kernel/sched/core.c:8758
__mutex_lock_common kernel/locking/mutex.c:562 [inline]
__mutex_lock+0x131/0xee0 kernel/locking/mutex.c:735
crypto_put_default_null_skcipher+0x18/0x70 crypto/crypto_null.c:179
aead_release+0x3d/0x50 crypto/algif_aead.c:489
alg_do_release crypto/af_alg.c:118 [inline]
alg_sock_destruct+0x86/0xc0 crypto/af_alg.c:502
__sk_destruct+0x58/0x5f0 net/core/sock.c:2260
rcu_do_batch kernel/rcu/tree.c:2567 [inline]
rcu_core+0xaaa/0x17a0 kernel/rcu/tree.c:2823
handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561
run_ksoftirqd+0xca/0x130 kernel/softirq.c:950
smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/uverbs: Prevent integer overflow issue
In the expression "cmd.wqe_size * cmd.wr_count", both variables are u32
values that come from the user so the multiplication can lead to integer
wrapping. Then we pass the result to uverbs_request_next_ptr() which also
could potentially wrap. The "cmd.sge_count * sizeof(struct ib_uverbs_sge)"
multiplication can also overflow on 32bit systems although it's fine on
64bit systems.
This patch does two things. First, I've re-arranged the condition in
uverbs_request_next_ptr() so that the use controlled variable "len" is on
one side of the comparison by itself without any math. Then I've modified
all the callers to use size_mul() for the multiplications. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: vmscan: account for free pages to prevent infinite Loop in throttle_direct_reclaim()
The task sometimes continues looping in throttle_direct_reclaim() because
allow_direct_reclaim(pgdat) keeps returning false.
#0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac
#1 [ffff80002cb6f900] __schedule at ffff800008abbd1c
#2 [ffff80002cb6f990] schedule at ffff800008abc50c
#3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550
#4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68
#5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660
#6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98
#7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8
#8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974
#9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4
At this point, the pgdat contains the following two zones:
NODE: 4 ZONE: 0 ADDR: ffff00817fffe540 NAME: "DMA32"
SIZE: 20480 MIN/LOW/HIGH: 11/28/45
VM_STAT:
NR_FREE_PAGES: 359
NR_ZONE_INACTIVE_ANON: 18813
NR_ZONE_ACTIVE_ANON: 0
NR_ZONE_INACTIVE_FILE: 50
NR_ZONE_ACTIVE_FILE: 0
NR_ZONE_UNEVICTABLE: 0
NR_ZONE_WRITE_PENDING: 0
NR_MLOCK: 0
NR_BOUNCE: 0
NR_ZSPAGES: 0
NR_FREE_CMA_PAGES: 0
NODE: 4 ZONE: 1 ADDR: ffff00817fffec00 NAME: "Normal"
SIZE: 8454144 PRESENT: 98304 MIN/LOW/HIGH: 68/166/264
VM_STAT:
NR_FREE_PAGES: 146
NR_ZONE_INACTIVE_ANON: 94668
NR_ZONE_ACTIVE_ANON: 3
NR_ZONE_INACTIVE_FILE: 735
NR_ZONE_ACTIVE_FILE: 78
NR_ZONE_UNEVICTABLE: 0
NR_ZONE_WRITE_PENDING: 0
NR_MLOCK: 0
NR_BOUNCE: 0
NR_ZSPAGES: 0
NR_FREE_CMA_PAGES: 0
In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of
inactive/active file-backed pages calculated in zone_reclaimable_pages()
based on the result of zone_page_state_snapshot() is zero.
Additionally, since this system lacks swap, the calculation of inactive/
active anonymous pages is skipped.
crash> p nr_swap_pages
nr_swap_pages = $1937 = {
counter = 0
}
As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to
the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having
free pages significantly exceeding the high watermark.
The problem is that the pgdat->kswapd_failures hasn't been incremented.
crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures
$1935 = 0x0
This is because the node deemed balanced. The node balancing logic in
balance_pgdat() evaluates all zones collectively. If one or more zones
(e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the
entire node is deemed balanced. This causes balance_pgdat() to exit early
before incrementing the kswapd_failures, as it considers the overall
memory state acceptable, even though some zones (like ZONE_NORMAL) remain
under significant pressure.
The patch ensures that zone_reclaimable_pages() includes free pages
(NR_FREE_PAGES) in its calculation when no other reclaimable pages are
available (e.g., file-backed or anonymous pages). This change prevents
zones like ZONE_DMA32, which have sufficient free pages, from being
mistakenly deemed unreclaimable. By doing so, the patch ensures proper
node balancing, avoids masking pressure on other zones like ZONE_NORMAL,
and prevents infinite loops in throttle_direct_reclaim() caused by
allow_direct_reclaim(pgdat) repeatedly returning false.
The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused
by a node being incorrectly deemed balanced despite pressure in certain
zones, such as ZONE_NORMAL. This issue arises from
zone_reclaimable_pages
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Fix resetting msg rx state after topology removal
If the MST topology is removed during the reception of an MST down reply
or MST up request sideband message, the
drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset
from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with
the reading/parsing of the message from another thread via
drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is
possible since the reader/parser doesn't hold any lock while accessing
the reception state. This in turn can lead to a memory corruption in the
reader/parser as described by commit bd2fccac61b4 ("drm/dp_mst: Fix MST
sideband message body length check").
Fix the above by resetting the message reception state if needed before
reading/parsing a message. Another solution would be to hold the
drm_dp_mst_topology_mgr::lock for the whole duration of the message
reception/parsing in drm_dp_mst_handle_down_rep() and
drm_dp_mst_handle_up_req(), however this would require a bigger change.
Since the fix is also needed for stable, opting for the simpler solution
in this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req()
While receiving an MST up request message from one thread in
drm_dp_mst_handle_up_req(), the MST topology could be removed from
another thread via drm_dp_mst_topology_mgr_set_mst(false), freeing
mst_primary and setting drm_dp_mst_topology_mgr::mst_primary to NULL.
This could lead to a NULL deref/use-after-free of mst_primary in
drm_dp_mst_handle_up_req().
Avoid the above by holding a reference for mst_primary in
drm_dp_mst_handle_up_req() while it's used.
v2: Fix kfreeing the request if getting an mst_primary reference fails. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level
cgroup maximum depth is INT_MAX by default, there is a cgroup toggle to
restrict this maximum depth to a more reasonable value not to harm
performance. Remove unnecessary WARN_ON_ONCE which is reachable from
userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
brd: defer automatic disk creation until module initialization succeeds
My colleague Wupeng found the following problems during fault injection:
BUG: unable to handle page fault for address: fffffbfff809d073
PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ #17
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:__asan_load8+0x4c/0xa0
...
Call Trace:
<TASK>
blkdev_put_whole+0x41/0x70
bdev_release+0x1a3/0x250
blkdev_release+0x11/0x20
__fput+0x1d7/0x4a0
task_work_run+0xfc/0x180
syscall_exit_to_user_mode+0x1de/0x1f0
do_syscall_64+0x6b/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
loop_init() is calling loop_add() after __register_blkdev() succeeds and
is ignoring disk_add() failure from loop_add(), for loop_add() failure
is not fatal and successfully created disks are already visible to
bdev_open().
brd_init() is currently calling brd_alloc() before __register_blkdev()
succeeds and is releasing successfully created disks when brd_init()
returns an error. This can cause UAF for the latter two case:
case 1:
T1:
modprobe brd
brd_init
brd_alloc(0) // success
add_disk
disk_scan_partitions
bdev_file_open_by_dev // alloc file
fput // won't free until back to userspace
brd_alloc(1) // failed since mem alloc error inject
// error path for modprobe will release code segment
// back to userspace
__fput
blkdev_release
bdev_release
blkdev_put_whole
bdev->bd_disk->fops->release // fops is freed now, UAF!
case 2:
T1: T2:
modprobe brd
brd_init
brd_alloc(0) // success
open(/dev/ram0)
brd_alloc(1) // fail
// error path for modprobe
close(/dev/ram0)
...
/* UAF! */
bdev->bd_disk->fops->release
Fix this problem by following what loop_init() does. Besides,
reintroduce brd_devices_mutex to help serialize modifications to
brd_list. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: Fix use-after-free of kernel socket in cleanup_bearer().
syzkaller reported a use-after-free of UDP kernel socket
in cleanup_bearer() without repro. [0][1]
When bearer_disable() calls tipc_udp_disable(), cleanup
of the UDP kernel socket is deferred by work calling
cleanup_bearer().
tipc_exit_net() waits for such works to finish by checking
tipc_net(net)->wq_count. However, the work decrements the
count too early before releasing the kernel socket,
unblocking cleanup_net() and resulting in use-after-free.
Let's move the decrement after releasing the socket in
cleanup_bearer().
[0]:
ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at
sk_alloc+0x438/0x608
inet_create+0x4c8/0xcb0
__sock_create+0x350/0x6b8
sock_create_kern+0x58/0x78
udp_sock_create4+0x68/0x398
udp_sock_create+0x88/0xc8
tipc_udp_enable+0x5e8/0x848
__tipc_nl_bearer_enable+0x84c/0xed8
tipc_nl_bearer_enable+0x38/0x60
genl_family_rcv_msg_doit+0x170/0x248
genl_rcv_msg+0x400/0x5b0
netlink_rcv_skb+0x1dc/0x398
genl_rcv+0x44/0x68
netlink_unicast+0x678/0x8b0
netlink_sendmsg+0x5e4/0x898
____sys_sendmsg+0x500/0x830
[1]:
BUG: KMSAN: use-after-free in udp_hashslot include/net/udp.h:85 [inline]
BUG: KMSAN: use-after-free in udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979
udp_hashslot include/net/udp.h:85 [inline]
udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979
sk_common_release+0xaf/0x3f0 net/core/sock.c:3820
inet_release+0x1e0/0x260 net/ipv4/af_inet.c:437
inet6_release+0x6f/0xd0 net/ipv6/af_inet6.c:489
__sock_release net/socket.c:658 [inline]
sock_release+0xa0/0x210 net/socket.c:686
cleanup_bearer+0x42d/0x4c0 net/tipc/udp_media.c:819
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310
worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391
kthread+0x531/0x6b0 kernel/kthread.c:389
ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244
Uninit was created at:
slab_free_hook mm/slub.c:2269 [inline]
slab_free mm/slub.c:4580 [inline]
kmem_cache_free+0x207/0xc40 mm/slub.c:4682
net_free net/core/net_namespace.c:454 [inline]
cleanup_net+0x16f2/0x19d0 net/core/net_namespace.c:647
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310
worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391
kthread+0x531/0x6b0 kernel/kthread.c:389
ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244
CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.12.0-rc1-00131-gf66ebf37d69c #7 91723d6f74857f70725e1583cba3cf4adc716cfa
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: events cleanup_bearer |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix use after free on unload
System crash is observed with stack trace warning of use after
free. There are 2 signals to tell dpc_thread to terminate (UNLOADING
flag and kthread_stop).
On setting the UNLOADING flag when dpc_thread happens to run at the time
and sees the flag, this causes dpc_thread to exit and clean up
itself. When kthread_stop is called for final cleanup, this causes use
after free.
Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop
as the main signal to exit dpc_thread.
[596663.812935] kernel BUG at mm/slub.c:294!
[596663.812950] invalid opcode: 0000 [#1] SMP PTI
[596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G IOE --------- - - 4.18.0-240.el8.x86_64 #1
[596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012
[596663.812974] RIP: 0010:__slab_free+0x17d/0x360
...
[596663.813008] Call Trace:
[596663.813022] ? __dentry_kill+0x121/0x170
[596663.813030] ? _cond_resched+0x15/0x30
[596663.813034] ? _cond_resched+0x15/0x30
[596663.813039] ? wait_for_completion+0x35/0x190
[596663.813048] ? try_to_wake_up+0x63/0x540
[596663.813055] free_task+0x5a/0x60
[596663.813061] kthread_stop+0xf3/0x100
[596663.813103] qla2x00_remove_one+0x284/0x440 [qla2xxx] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix OOB devmap writes when deleting elements
Jordy reported issue against XSKMAP which also applies to DEVMAP - the
index used for accessing map entry, due to being a signed integer,
causes the OOB writes. Fix is simple as changing the type from int to
u32, however, when compared to XSKMAP case, one more thing needs to be
addressed.
When map is released from system via dev_map_free(), we iterate through
all of the entries and an iterator variable is also an int, which
implies OOB accesses. Again, change it to be u32.
Example splat below:
[ 160.724676] BUG: unable to handle page fault for address: ffffc8fc2c001000
[ 160.731662] #PF: supervisor read access in kernel mode
[ 160.736876] #PF: error_code(0x0000) - not-present page
[ 160.742095] PGD 0 P4D 0
[ 160.744678] Oops: Oops: 0000 [#1] PREEMPT SMP
[ 160.749106] CPU: 1 UID: 0 PID: 520 Comm: kworker/u145:12 Not tainted 6.12.0-rc1+ #487
[ 160.757050] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[ 160.767642] Workqueue: events_unbound bpf_map_free_deferred
[ 160.773308] RIP: 0010:dev_map_free+0x77/0x170
[ 160.777735] Code: 00 e8 fd 91 ed ff e8 b8 73 ed ff 41 83 7d 18 19 74 6e 41 8b 45 24 49 8b bd f8 00 00 00 31 db 85 c0 74 48 48 63 c3 48 8d 04 c7 <48> 8b 28 48 85 ed 74 30 48 8b 7d 18 48 85 ff 74 05 e8 b3 52 fa ff
[ 160.796777] RSP: 0018:ffffc9000ee1fe38 EFLAGS: 00010202
[ 160.802086] RAX: ffffc8fc2c001000 RBX: 0000000080000000 RCX: 0000000000000024
[ 160.809331] RDX: 0000000000000000 RSI: 0000000000000024 RDI: ffffc9002c001000
[ 160.816576] RBP: 0000000000000000 R08: 0000000000000023 R09: 0000000000000001
[ 160.823823] R10: 0000000000000001 R11: 00000000000ee6b2 R12: dead000000000122
[ 160.831066] R13: ffff88810c928e00 R14: ffff8881002df405 R15: 0000000000000000
[ 160.838310] FS: 0000000000000000(0000) GS:ffff8897e0c40000(0000) knlGS:0000000000000000
[ 160.846528] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 160.852357] CR2: ffffc8fc2c001000 CR3: 0000000005c32006 CR4: 00000000007726f0
[ 160.859604] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 160.866847] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 160.874092] PKRU: 55555554
[ 160.876847] Call Trace:
[ 160.879338] <TASK>
[ 160.881477] ? __die+0x20/0x60
[ 160.884586] ? page_fault_oops+0x15a/0x450
[ 160.888746] ? search_extable+0x22/0x30
[ 160.892647] ? search_bpf_extables+0x5f/0x80
[ 160.896988] ? exc_page_fault+0xa9/0x140
[ 160.900973] ? asm_exc_page_fault+0x22/0x30
[ 160.905232] ? dev_map_free+0x77/0x170
[ 160.909043] ? dev_map_free+0x58/0x170
[ 160.912857] bpf_map_free_deferred+0x51/0x90
[ 160.917196] process_one_work+0x142/0x370
[ 160.921272] worker_thread+0x29e/0x3b0
[ 160.925082] ? rescuer_thread+0x4b0/0x4b0
[ 160.929157] kthread+0xd4/0x110
[ 160.932355] ? kthread_park+0x80/0x80
[ 160.936079] ret_from_fork+0x2d/0x50
[ 160.943396] ? kthread_park+0x80/0x80
[ 160.950803] ret_from_fork_asm+0x11/0x20
[ 160.958482] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: fix OOB map writes when deleting elements
Jordy says:
"
In the xsk_map_delete_elem function an unsigned integer
(map->max_entries) is compared with a user-controlled signed integer
(k). Due to implicit type conversion, a large unsigned value for
map->max_entries can bypass the intended bounds check:
if (k >= map->max_entries)
return -EINVAL;
This allows k to hold a negative value (between -2147483648 and -2),
which is then used as an array index in m->xsk_map[k], which results
in an out-of-bounds access.
spin_lock_bh(&m->lock);
map_entry = &m->xsk_map[k]; // Out-of-bounds map_entry
old_xs = unrcu_pointer(xchg(map_entry, NULL)); // Oob write
if (old_xs)
xsk_map_sock_delete(old_xs, map_entry);
spin_unlock_bh(&m->lock);
The xchg operation can then be used to cause an out-of-bounds write.
Moreover, the invalid map_entry passed to xsk_map_sock_delete can lead
to further memory corruption.
"
It indeed results in following splat:
[76612.897343] BUG: unable to handle page fault for address: ffffc8fc2e461108
[76612.904330] #PF: supervisor write access in kernel mode
[76612.909639] #PF: error_code(0x0002) - not-present page
[76612.914855] PGD 0 P4D 0
[76612.917431] Oops: Oops: 0002 [#1] PREEMPT SMP
[76612.921859] CPU: 11 UID: 0 PID: 10318 Comm: a.out Not tainted 6.12.0-rc1+ #470
[76612.929189] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[76612.939781] RIP: 0010:xsk_map_delete_elem+0x2d/0x60
[76612.944738] Code: 00 00 41 54 55 53 48 63 2e 3b 6f 24 73 38 4c 8d a7 f8 00 00 00 48 89 fb 4c 89 e7 e8 2d bf 05 00 48 8d b4 eb 00 01 00 00 31 ff <48> 87 3e 48 85 ff 74 05 e8 16 ff ff ff 4c 89 e7 e8 3e bc 05 00 31
[76612.963774] RSP: 0018:ffffc9002e407df8 EFLAGS: 00010246
[76612.969079] RAX: 0000000000000000 RBX: ffffc9002e461000 RCX: 0000000000000000
[76612.976323] RDX: 0000000000000001 RSI: ffffc8fc2e461108 RDI: 0000000000000000
[76612.983569] RBP: ffffffff80000001 R08: 0000000000000000 R09: 0000000000000007
[76612.990812] R10: ffffc9002e407e18 R11: ffff888108a38858 R12: ffffc9002e4610f8
[76612.998060] R13: ffff888108a38858 R14: 00007ffd1ae0ac78 R15: ffffc9002e4610c0
[76613.005303] FS: 00007f80b6f59740(0000) GS:ffff8897e0ec0000(0000) knlGS:0000000000000000
[76613.013517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[76613.019349] CR2: ffffc8fc2e461108 CR3: 000000011e3ef001 CR4: 00000000007726f0
[76613.026595] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[76613.033841] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[76613.041086] PKRU: 55555554
[76613.043842] Call Trace:
[76613.046331] <TASK>
[76613.048468] ? __die+0x20/0x60
[76613.051581] ? page_fault_oops+0x15a/0x450
[76613.055747] ? search_extable+0x22/0x30
[76613.059649] ? search_bpf_extables+0x5f/0x80
[76613.063988] ? exc_page_fault+0xa9/0x140
[76613.067975] ? asm_exc_page_fault+0x22/0x30
[76613.072229] ? xsk_map_delete_elem+0x2d/0x60
[76613.076573] ? xsk_map_delete_elem+0x23/0x60
[76613.080914] __sys_bpf+0x19b7/0x23c0
[76613.084555] __x64_sys_bpf+0x1a/0x20
[76613.088194] do_syscall_64+0x37/0xb0
[76613.091832] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[76613.096962] RIP: 0033:0x7f80b6d1e88d
[76613.100592] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48
[76613.119631] RSP: 002b:00007ffd1ae0ac68 EFLAGS: 00000206 ORIG_RAX: 0000000000000141
[76613.131330] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f80b6d1e88d
[76613.142632] RDX: 0000000000000098 RSI: 00007ffd1ae0ad20 RDI: 0000000000000003
[76613.153967] RBP: 00007ffd1ae0adc0 R08: 0000000000000000 R09: 0000000000000000
[76613.166030] R10: 00007f80b6f77040 R11: 0000000000000206 R12: 00007ffd1ae0aed8
[76613.177130] R13: 000055ddf42ce1e9 R14: 000055ddf42d0d98 R15: 00
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: inet: do not leave a dangling sk pointer in inet_create()
sock_init_data() attaches the allocated sk object to the provided sock
object. If inet_create() fails later, the sk object is freed, but the
sock object retains the dangling pointer, which may create use-after-free
later.
Clear the sk pointer in the sock object on error. |
| In the Linux kernel, the following vulnerability has been resolved:
net: inet6: do not leave a dangling sk pointer in inet6_create()
sock_init_data() attaches the allocated sk pointer to the provided sock
object. If inet6_create() fails later, the sk object is released, but the
sock object retains the dangling sk pointer, which may cause use-after-free
later.
Clear the sock sk pointer on error. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs()
if (dev->boardinfo && dev->boardinfo->init_dyn_addr)
^^^ here check "init_dyn_addr"
i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr, ...)
^^^^
free "dyn_addr"
Fix copy/paste error "dyn_addr" by replacing it with "init_dyn_addr". |
