| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: msi2500: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
msi2500_start_streaming() had five error paths that all hit this trap
and were further tangled by ret-overwriting between calls:
- -ENODEV when the USB device was already disconnected
- -ERESTARTSYS when mutex_lock_interruptible() was interrupted
- msi2500_set_usb_adc() failure: ret was silently overwritten by
the next call (msi2500_isoc_init), so the error was lost entirely
- msi2500_isoc_init() failure: cleanup_queued_bufs was called, but
the function then fell through to msi2500_ctrl_msg() and again
masked the original error by overwriting ret
- msi2500_ctrl_msg(CMD_START_STREAMING) failure: no cleanup at all,
leaving isoc URBs submitted with no way for the driver to consume
them
Consolidate the error paths into a small goto chain. Every failure
now stops the function, drains the queued-buffer list, and returns
the real error code. The ctrl_msg failure path also rolls back the
preceding msi2500_isoc_init() via msi2500_isoc_cleanup() before
unlocking and draining.
The cleanup helper takes a vb2_buffer_state argument so that the
start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as
expected by userspace on start_streaming failure) while stop_streaming
keeps its existing VB2_BUF_STATE_ERROR semantics.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: wait on ublk_dev_ready() instead of ub->completion
ub->completion is only re-armed by a successful START_USER_RECOVERY. If
the ublk server sends END_USER_RECOVERY without one - e.g. its START
failed with -EBUSY and the error was ignored - the wait is satisfied by
the stale completion of the previous recovery cycle, and the device is
marked LIVE and the requeue list kicked while the FETCH stream is still
running and ubq->canceling is still set. The kick redispatches a
previously requeued request, __ublk_queue_rq_common() sees ->canceling
and parks it again via __ublk_abort_rq(), and after the last FETCH
clears ->canceling nothing ever kicks the requeue list again: the
request is stranded there while holding its tag. If it is the flush
machinery's flush_rq, every subsequent fsync piles up in uninterruptible
sleep and teardown hangs on tag draining. This matches a report of a
lost PREFLUSH with ext4 on top of ublk after daemon crash recovery.
ub->completion is an edge-triggered latch used as a proxy for the level
condition "every queue has fetched all I/O commands", which can regress
(F_BATCH's UNPREP, daemon death) and whose re-arm can be skipped. Drop
it and wait on the real condition instead: the new helper
ublk_wait_dev_ready_and_lock() waits on ublk_dev_ready() via
wait_var_event_interruptible(), woken from ublk_mark_io_ready(), then
re-checks it under ub->mutex, waiting again on regression, and returns
with the mutex held and readiness guaranteed.
Readiness becomes true in the same ub->mutex critical section that
clears the last queue's ->canceling, so END_USER_RECOVERY marks the
device LIVE and kicks the requeue list strictly after ->canceling
clears. The wait stays interruptible, so a server whose daemon died can
still be signalled out. For ublk_ctrl_start_dev() this replaces the
fail-fast -EINVAL on an F_BATCH ready->UNPREP regression with waiting
until the device is ready again. |
| In the Linux kernel, the following vulnerability has been resolved:
media: pwc: Drain fill_buf on start_streaming() failure
pwc_isoc_init() submits its isochronous URBs with
usb_submit_urb(.., GFP_KERNEL) in a loop. After the first URB is
submitted, its completion handler pwc_isoc_handler() can run on another
CPU before the loop finishes:
start_streaming()
pwc_isoc_init()
usb_submit_urb(urbs[0], GFP_KERNEL)
pwc_isoc_handler(urbs[0])
pdev->fill_buf =
pwc_get_next_fill_buf(pdev)
usb_submit_urb(urbs[i>0], ..) -> fails
pwc_isoc_cleanup(pdev) /* kills URBs */
return ret;
pwc_cleanup_queued_bufs(pdev, VB2_BUF_STATE_QUEUED)
pwc_get_next_fill_buf() detaches a buffer from pdev->queued_bufs and
stores it in pdev->fill_buf. The error path in start_streaming() only
drains pdev->queued_bufs, so the buffer parked in pdev->fill_buf is
leaked. vb2_start_streaming() then triggers
WARN_ON(owned_by_drv_count).
stop_streaming() already handles this since commit 80b0963e1698
("[media] pwc: fix WARN_ON"), which added the fill_buf drain in the
teardown path but not in the start_streaming() error path. Mirror that
handling on failure so start_streaming() returns with no buffer owned
by the driver.
Issue identified by automated review of the INV-003 series at
https://sashiko.dev/ |
| In the Linux kernel, the following vulnerability has been resolved:
media: meson: vdec: Fix memory leak in error path of vdec_open
The vdec_open() function previously jumped directly to
err_m2m_release when vdec_init_ctrls() failed, skipping
release of the m2m context. This caused a resource leak.
Fix it by introducing a proper err_m2m_ctx_release label
that calls v4l2_m2m_ctx_release(sess->m2m_ctx) before
releasing the m2m device.
This was identified via kmemleak:
unreferenced object 0xffff0000205d6878 (size 8):
comm "v4l_id", pid 5289, jiffies 4294938580
hex dump (first 8 bytes):
40 d2 49 18 00 00 ff ff @.I.....
backtrace (crc d3204599):
kmemleak_alloc+0xc8/0xf0
__kvmalloc_node_noprof+0x60c/0x850
v4l2_ctrl_handler_init_class+0x1b4/0x2e8 [videodev]
vdec_open+0x1f4/0x788 [meson_vdec]
v4l2_open+0x144/0x460 [videodev]
chrdev_open+0x1ac/0x500
do_dentry_open+0x3f0/0xfe8
vfs_open+0x68/0x320
do_open+0x2d8/0x9a8
path_openat+0x1d0/0x4f0
do_filp_open+0x190/0x380
do_sys_openat2+0xf8/0x1b0
__arm64_sys_openat+0x13c/0x1e8
invoke_syscall+0xdc/0x268
el0_svc_common.constprop.0+0x178/0x258
do_el0_svc+0x4c/0x70 |
| In the Linux kernel, the following vulnerability has been resolved:
media: mali-c55: Fix possible ERR_PTR in enable_streams
The media_pad_remote_pad_unique() function returns either a valid
pointer or an ERR_PTR() on failure (-ENOTUNIQ if multiple links are
enabled, -ENOLINK if no connected pad is found). The return value
was assigned directly to isp->remote_src and dereferenced in the
next line without checking for errors, which could lead to an
ERR_PTR dereference.
Add proper error checking with IS_ERR() before dereferencing the
pointer. Also set isp->remote_src to NULL on error to maintain
consistency with other error paths in the function. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: alvium: fix critical pointer access in alvium_ctrl_init
The current implementation of alvium_ctrl_init creates several controls in
function alvium_ctrl_init and uses the returned pointer without check. That
can cause write access over NULL-pointer for several controls. The reworked
code checks the pointers before adding flags. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx23885: add ioremap return check and cleanup
Add a check for the return value of pci_ioremap_bar()
in cx23885_dev_setup().
If ioremap for BAR0 fails, release the already allocated
PCI memory region,
decrement the device count, and return -ENODEV.
This prevents a potential null pointer dereference and
ensures proper cleanup
on memory mapping failure. |
| In the Linux kernel, the following vulnerability has been resolved:
media: amlogic-c3: Add validations for ae and awb config
Avoid invalid memory access if the zones_num is bigger than
zone_weight.
This patch fixes the following smatch errors:
drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:111 c3_isp_params_awb_wt() error: buffer overflow 'cfg->zone_weight' 768 <= u32max
drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:111 c3_isp_params_awb_wt() error: buffer overflow 'cfg->zone_weight' 768 <= u32max
drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:227 c3_isp_params_ae_wt() error: buffer overflow 'cfg->zone_weight' 255 <= u32max
drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:227 c3_isp_params_ae_wt() error: buffer overflow 'cfg->zone_weight' 255 <= u32max |
| Lack of authentication for Very High Frequency Data Link messages allows rogue ground stations to inject CPDLC messages leading to unexpected or misleading clearances and potential pilot confusion. This type of attack can be carried out remotely over radio frequency. |
| Consul Community Edition and Consul Enterprise 1.19.1 through 2.0.2 did not enforce the {{session:write}} ACL permission for session deletion operations submitted through the transaction API. An authenticated caller with network access to the Consul server RPC port could delete arbitrary sessions without holding the required permission. This vulnerability, CVE-2026-19016, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| Consul Community Edition and Consul Enterprise 1.18.0 through 2.0.2 are vulnerable to an authenticated denial of service in the Enterprise-to-Community Edition downgrade path that may allow an authorized caller to crash the Consul server. A caller with config-entry write permission can submit a service-router configuration entry that causes the agent to exit unexpectedly. This vulnerability, CVE-2026-19012, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| Consul Community Edition and Consul Enterprise 1.17.0 through 2.0.2 are vulnerable to an uncontrolled resource consumption issue in the Connect authorization endpoint that may allow a caller to grow the agent's intention-match cache without bound, defeating the operator's cache-disable configuration. This vulnerability, CVE-2026-190124, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| Consul Community Edition and Consul Enterprise 1.2.0 through 2.0.2 are vulnerable to an uncontrolled resource consumption issue in the Connect CA roots endpoint that may allow a remote caller to grow the agent's Connect CA roots cache without bound, defeating the operator's cache-disable configuration. This vulnerability, CVE-2026-19015, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| Consul Community Edition and Consul Enterprise 1.20.1 through 2.0.2 are vulnerable to an L7 intention authorization bypass when a service proxy is configured with a custom public listener. An authenticated mesh workload may reach HTTP paths that are blocked by a path-based deny intention. This vulnerability, CVE-2026-15970, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| Consul Community Edition and Consul Enterprise 1.13.0 through 2.0.2 are vulnerable to an unauthenticated denial of service through unbounded connection acceptance on the external gRPC listeners. A remote attacker may exhaust agent file descriptors, goroutines, and memory by opening many incomplete connections, potentially preventing legitimate clients from connecting. This vulnerability, CVE-2026-15972, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| Consul Community Edition and Consul Enterprise 1.3.0 through 2.0.2 are vulnerable to an unauthenticated denial of service in several agent HTTP API endpoints. A remote caller could cause the agent to consume substantial memory before the request was rejected. This vulnerability, CVE-2026-19113, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| A denial-of-service
vulnerability exists in httpd service on Archer A6 v4 where the asynchronous systool
instruction handlng path in httpd does not properly synchronize or safely manage
concurrent systool operations.
By sending
crafted systool instructions through the asynchronous request path, successful
exploitation may cause the httpd process or device management service to crash
and may result in temporary loss of access to the web management interface or
device reboot. |
| An input validation
vulnerability exists in the HTTP-WRITEOEM handler due to insufficient validation
of user-supplied data before it is processed by internal flash-write handling
logic.
Successful
exploitation may cause httpd process or device to crash, resulting in loss of access
to the web interface and a denial-of-service condition. |
| The kernel queue helper z_queue_node_peek() in kernel/queue.c dereferences a node taken from a queue's data_q list, reading the node's flag byte and, for items enqueued via k_queue_alloc_append/alloc_prepend, the data pointer of an internally allocated alloc_node struct. The implementations of z_impl_k_queue_peek_head() and z_impl_k_queue_peek_tail() performed this read-and-dereference without holding the queue's spinlock, while every other accessor of the same list — including k_queue_get(), which unlinks a node and k_free()s its backing alloc_node — operates under that lock.
Because peek was unsynchronized, a concurrent k_queue_get() on the same queue (on an SMP build, or under preemption/ISR concurrency) can free the node between the moment peek obtains the node pointer and the moment it dereferences it. The peek then reads flag bits and a data pointer out of freed, potentially re-allocated heap memory and returns a stale or dangling pointer to its caller. k_fifo and k_lifo are thin wrappers over k_queue, so this affects buffer queues used throughout the net_buf, Bluetooth, USB, and networking subsystems; the peek operations are also system calls reachable from CONFIG_USERSPACE threads.
The consequences are a use-after-free read that can leak stale heap contents (one pointer word) and, when the returned dangling pointer is subsequently consumed as a live buffer, a dereference that can crash the system or corrupt memory. Exploitation requires winning a small race window with local access (e.g. a userspace process racing k_queue_peek_* against k_queue_get on a shared queue, or two CPUs), so practical impact is bounded and of low severity.
The fix wraps both peek implementations with k_spin_lock/k_spin_unlock on the queue lock, making the read-and-dereference atomic with respect to the concurrent unlink-and-free and bringing peek into line with the rest of the queue's locking discipline. |
| The SF32LB MPI QSPI NOR flash driver (drivers/flash/flash_sf32lb_mpi_qspi_nor.c) validated the flash offset and length on its read and write paths with the test (offset + size) > data->size. Because offset is a signed off_t while size is unsigned, a negative offset is converted to a large unsigned value and the addition can wrap to a small result that passes the check. The read path then performs memcpy(dst, (void *)(data->base + offset), size) and the write path programs flash at offset and cache-invalidates data->base + offset, in both cases accessing memory outside the mapped flash window. The driver's erase path already rejected negative offsets, but read and write did not.
In builds with CONFIG_USERSPACE, flash_read and flash_write are syscalls whose verifiers validate the device object and the caller's buffer but deliberately delegate offset bounds checking to the driver. An unprivileged thread that has been granted access to this flash device can therefore call the syscall with a crafted negative offset and a buffer valid in its own memory domain, and reach the unchecked access.
The most direct impact is on the read path: by choosing a negative offset and matching size, an attacker slides the memcpy source below the flash base and copies arbitrary CPU-addressable memory into its own buffer, disclosing memory it is not authorized to read. The write path additionally allows programming flash at an out-of-range address and invalidating an attacker-chosen cache range, affecting integrity and availability. Reachability requires userspace to be enabled and the raw flash device object to be granted to an untrusted thread.
The fix replaces the check with qspi_nor_range_is_valid(), which rejects negative offsets and performs the bound comparison in overflow-safe 64-bit arithmetic on both paths, and additionally adds an SRAM DMA bounce buffer plus source/destination overlap rejection to prevent a separate DMA bus-hang condition. |
