| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in WatchGuard Fireware OS (Tigerpaw Technology Integration module) allows Stored XSS. This vulnerability is an additional unmitigated attack path for CVE-2025-13936. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in WatchGuard Fireware OS (ConnectWise Technology Integration module) allows Stored XSS. This vulnerability is an additional unmitigated attack path for CVE-2025-13937. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in WatchGuard Fireware OS (Autotask Technology Integration module) allows Stored XSS. This vulnerability is an additional unmitigated attack path for CVE-2025-13938.
This issue affects Fireware OS 12.4 up to and including 12.12, 12.5 up to and including 12.5.18, and 2025.1 up to and including 2026.2. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: disallow overlapping input ranges for damon_set_regions()
damon_set_regions() assumes the input ranges are sorted by the address and
don't overlap each other. Hence the assumption was initially to be
explicitly validated. But commit 97d482f4592f ("mm/damon/sysfs: reuse
damon_set_regions() for regions setting") has mistakenly removed the
validation.
This can make DAMON behave in unexpected ways. At the best, the
monitoring results snapshot will just look weird since there will be
overlapping regions. DAMOS will also work weirdly, applying the same
action multiple times for overlapping regions, and make DAMOS quota weird.
More seriously, depending on the setup and regions updates sequence,
negative size regions can be made. It will trigger WARN_ONCE() if the
kernel is built with CONFIG_DAMON_DEBUG_SANITY=y. Depending on the
monitoring results, the negative size region can further trigger division
by zero in damon_merge_two_regions().
Note that some of the consequences including the WARN_ONCE() and the
divide by zero depend on commits that were introduced after the root cause
commit 97d482f4592f ("mm/damon/sysfs: reuse damon_set_regions() for
regions setting").
Fix the problems by checking the assumption and returning an error if
the input ranges don't meet the assumption.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: nsm: only unlock nsm_dev on post-lock error paths
nsm_dev_ioctl() jumps to the common out label even when the initial
copy_from_user() fails before nsm->lock has been taken. The error path
then blindly unlocks a mutex that was never acquired.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the miscdevice ioctl entry and the pre-lock
copy_from_user(&raw, argp, _IOC_SIZE(cmd)) failure path by issuing
NSM_IOCTL_RAW with an invalid user pointer. That failure reaches the
shared out label before mutex_lock(&nsm->lock). Lockdep reported:
WARNING: bad unlock balance detected!
exploit/193 is trying to release lock (&global_nsm.lock) at:
nsm_dev_ioctl+0x5f/0xcf [vuln_msv]
but there are no more locks to release!
no locks held by exploit/193.
Return immediately on the pre-lock copy_from_user() failure and keep the
common unlock label for the post-lock paths only. |
| In the Linux kernel, the following vulnerability has been resolved:
intel_th: fix MSC output device reference leak
intel_th_output_open() looks up the output device with
bus_find_device_by_devt(), which returns the device with a reference that
must be dropped after use.
commit 95fc36a234da ("intel_th: fix device leak on output open()")
attempted to drop the reference from intel_th_output_release(). However,
a successful open replaces file->f_op with the output driver file
operations before returning, so close runs the output driver release
callback instead.
For MSC outputs, close runs intel_th_msc_release(), which only removes
the per-file iterator and does not drop the device reference taken by
intel_th_output_open(). Consequently, every successful MSC output open
leaks one device reference.
Drop the device reference from intel_th_msc_release(), which is the
release path actually used for MSC output files. Remove the now-unused
intel_th_output_release() callback from intel_th_output_fops. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: fix unsigned loop counter wrap in transfer_args_to_stack()
The stop value is derived from bprm->p >> PAGE_SHIFT. The index variable
is an unsigned long. If bprm->p drops below PAGE_SIZE and stop becomes
zero the loop condition index >= stop is always true.
After the index == 0 iteration the decrement wraps to ULONG_MAX and
bprm->page[ULONG_MAX] reads sizeof(void *) bytes in front of the array.
The pointer has wrapped to -1. That garbage pointer is then passed to
kmap_local_page() and PAGE_SIZE bytes are copied from wherever that
lands into the stack of the process being created. And the loop doesn't
terminate either...
Getting there only requires bprm->p < PAGE_SIZE. On !MMU
bprm_set_stack_limit() and bprm_hit_stack_limit() are empty. So the only
constraint on how far bprm->p is pushed down is valid_arg_len(), i.e.
that each individual string still fits in what is left.
bprm->p starts at PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *) so a
single argument or environment string of a little over 31 pages leaves
it in the first page:
Oops - load access fault [#1]
CPU: 0 UID: 0 PID: 1 Comm: victim Not tainted 7.2.0-rc4 #1
epc : __memcpy+0xd4/0xf8
ra : transfer_args_to_stack+0xaa/0xae
s4 : ffffffffffffffff s2 : 0000000000000000
a1 : ffffffdc98000000 a2 : 0000000000001000
status: 0000000a00001880 badaddr: ffffffdc98000000 cause: 0000000000000005
[<801a5324>] __memcpy+0xd4/0xf8
[<800d5f6a>] load_flat_binary+0x43a/0x65e
[<800a2de4>] bprm_execve+0x1d4/0x316
[<800a351a>] do_execveat_common+0x12e/0x138
[<800a3d44>] __riscv_sys_execve+0x38/0x4e
Kernel panic - not syncing: Fatal exception in interrupt
This is an arcane bug but we should still fix it.
Count down from MAX_ARG_PAGES so the loop ends when index reaches stop,
stop == 0 included. The iterations performed are unchanged for every
other value of stop.
Only CONFIG_MMU=n builds are affected, transfer_args_to_stack() is used
by binfmt_flat and binfmt_elf_fdpic on nommu only.
The loop predates git history. commit 7e7ec6a93434
("elf_fdpic_transfer_args_to_stack(): make it generic") only moved it
from binfmt_elf_fdpic.c into fs/exec.c and narrowed the copy to the used
part of the first page. The condition and the decrement are unchanged
from 2.6.12-rc2. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7615: drop TXRX_NOTIFY on non-mmio buses
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7615_rx_check() and
mt7615_queue_rx_skb() dispatch it to mt7615_mac_tx_free() on every bus.
mt7615_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on the mt7663 USB and SDIO
buses it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX
worker. Same defect as the mt7921 and mt7925 patches in this series.
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices"). |
| Improper input validation in Galaxy Themes prior to SMR Aug-2026 Release 1 allows physical attackers to launch arbitrary activity. |
| An authenticated administrator can trigger a denial-of-service condition in the Fireware Management Web UI by sending malformed or crafted data to the put_data endpoint, which performs unsafe deserialization of the attacker-supplied input. |
| Improper input validation in libsmsd.so prior to SMR Aug-2026 Release 1 allows local attackers to write out-of-bounds memory. |
| Uncontrolled Search Path Element vulnerability in WatchGuard Agent on Windows allows Using Malicious Files. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: Fix session UAF in set_termios
rfcomm_tty_set_termios() tests dlc->session without rfcomm_mutex and
later passes the pointer to rfcomm_send_rpn(). The latter dereferences
both session->initiator and session->sock. Meanwhile, krfcommd can
unlink the DLC and free the session while holding rfcomm_mutex.
The race can proceed as follows:
TTY ioctl task krfcommd
-------------- --------
load dlc->session
enter rfcomm_send_rpn()
lock rfcomm_mutex
clear dlc->session
free session
unlock rfcomm_mutex
read session->initiator
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_send_rpn+0x297/0x2a0
Read of size 4 at addr ffff88810012a850 by task poc/92
Call Trace:
rfcomm_send_rpn+0x297/0x2a0
rfcomm_tty_set_termios+0x50d/0x850
tty_set_termios+0x596/0x950
set_termios+0x46a/0x6e0
tty_mode_ioctl+0x152/0xbd0
tty_ioctl+0x915/0x1240
__x64_sys_ioctl+0x134/0x1c0
Allocated by task 92:
rfcomm_session_add+0x9e/0x2e0
rfcomm_dlc_open+0x8b1/0xe00
rfcomm_dev_activate+0x85/0x1a0
rfcomm_tty_open+0x90/0x280
Freed by task 68:
kfree+0x131/0x3c0
rfcomm_session_del+0x119/0x180
rfcomm_run+0x737/0x4710
Add rfcomm_dlc_send_rpn(), which holds rfcomm_mutex while it verifies
that the DLC is still attached and sends the RPN frame. Have the TTY
path use the helper and drop its unlocked session check. This keeps the
session valid through both the frame construction and socket send. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| Use of Hard-coded Cryptographic Key vulnerability in WatchGuard Agent on Windows allows Inclusion of Code in Existing Process. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
