| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Imprivata EAM <=26.2.6 lacks the ability to rotate its RSA key pair after deployment when generating an X.509 certificate. Using an RSA key pair indefinitely for certificate generation is against best practices. |
| Incorrect Access Control in the HTTP API module in ZLMediaKit commit 9fd5152 allows remote attackers to achieve Remote Code Execution (RCE) via unauthenticated access to the setServerConfig API endpoint, which permits overwriting the ffmpeg.snap configuration parameter with arbitrary shell commands. These commands are subsequently executed through the getSnap API endpoint with the privileges of the ZLMediaKit process. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix NULL pointer dereference on unbind with fixed-link
When the device tree describes a fixed-link and has no "mdio" child
node, macb_mii_init() returns early without allocating the MDIO bus,
leaving bp->mii_bus as NULL.
Two cleanup paths then dereference this NULL bus:
1. On driver unbind, macb_remove() unconditionally calls
mdiobus_unregister(bp->mii_bus), which oopses:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000004a8
pc : mdiobus_unregister+0x14/0xa4
lr : macb_remove+0x38/0xa4
Call trace:
mdiobus_unregister+0x14/0xa4 (P)
macb_remove+0x38/0xa4
platform_remove+0x20/0x30
device_release_driver_internal+0x1c8/0x224
unbind_store+0xb4/0xbc
2. On the probe error path in macb_probe(), reached when
macb_mii_init() has succeeded but a subsequent step fails, the
err_out_unregister_mdio label runs the same unconditional cleanup.
mdiobus_unregister() and mdiobus_free() do not guard against a NULL
bus, so guard the calls in both macb_remove() and the probe error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: hhf: clamp quantum in change and init paths
hhf_change() accepts any quantum from userspace, including 1. With a
crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1 makes
the deficit-refill loop spin ~2^31 times under the qdisc lock
(a soft lockup / denial of service).
Add max(256U, ...) in hhf_change() matching fq_codel_change(). Clamp
hhf_init() to [256, 1<<20] matching the siblings, and remove the old
fallback that only set quantum=256 on overflow.
Conditions to recreate the bug:
CONFIG_NET_SCH_HHF=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root hhf
tc qdisc change dev dummy0 root hhf quantum 1 stab data 32768 size_log 15 cell_log 0 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: defer qdisc freeing after failed creation
An RTM_NEWQDISC request can make clsact bind a populated shared ingress
block during ->init(), publishing an embedded mini_Qdisc to lockless
readers. If the same request has an invalid TCA_RATE, estimator setup
fails after ->init(); the unwind removes the pointer but synchronously
frees its containing qdisc while tc_run() may still hold it.
Retire failed qdiscs through the same RCU helper as normal destruction.
Inline the synchronous free into the callback now that no direct callers
remain. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mv88e6xxx: bound the policy rule dump by the caller's buffer size
mv88e6xxx_get_rxnfc() uses rxnfc->rule_cnt as the write index while
dumping the policy IDR, clobbering the input value before it has been
looked at. That input is the number of entries the caller had room for.
ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the
buffer from the rule_cnt userspace passes in, so once an admin has
installed policy rules any user can ask for fewer slots than there are
rules and run off the end of the allocation. A rule_cnt of 0 leaves the
buffer pointer NULL and the walk dereferences it.
Count into a local so the caller's limit survives the walk, and stop with
-EMSGSIZE once it is reached. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject untrusted allocated-object pointers
When the final RCU read-side critical section ends, a local kptr is demoted
to PTR_UNTRUSTED but retains MEM_ALLOC. The pointer may be NULL or may refer
to an object whose lifetime is no longer protected.
type_is_ptr_alloc_obj() nevertheless recognizes any PTR_TO_BTF_ID with
MEM_ALLOC as a live allocated object. In particular, a refcount-only local
kptr never carries NON_OWN_REF, so it still passes the
bpf_refcount_acquire() argument check after RCU protection ends. The kfunc
can then dereference NULL or stale memory.
Make type_is_ptr_alloc_obj() reject PTR_UNTRUSTED pointers. Since
type_is_non_owning_ref() is based on the same predicate, graph kfunc
arguments obey the same live-object requirement. Fault-protected reads of
the demoted pointer remain valid: writes are already rejected, and read
fixups use bpf_may_fault_on_deref() rather than this predicate.
[ kkd: Rewrote commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Don't predict JMP32 pointer vs zero comparisons
Consider the following program:
r1 = map_value; /* low 32 bits are zero at runtime */
r6 = 0xdead000000000000;
if w1 != 0 goto l1;
l0: r1 += r6;
r2 = *(u64 *)(r1 + 0);
exit;
l1: r6 = 0;
goto l0;
At the moment is_branch_taken() reports the jump as always taken,
because it does not distinguish between BPF_JMP and BPF_JMP32
comparisons when processing 'if w1 != 0 ...'. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Don't infer non-NULL from a pointer with an unbounded offset
reg_not_null() decides that a register holds a non-NULL value by
looking at its type alone. For pointer types that allow arithmetic the
type only guarantees a non-NULL base, in case of an unbound offset
the runtime offset value might still add up to NULL.
Consider the followng program:
r6 = bpf_map_lookup_elem(map, &0); /* present */
if (r6 == 0) return 0;
r7 = bpf_map_lookup_elem(map, &1); /* absent, NULL at runtime */
r8 = r7;
r8 -= r6; /* pointer - pointer: unknown scalar, -r6 */
r8 <<= 1;
r8 >>= 1; /* any non-negative offset is accepted by */
/* check_reg_sane_offset_ptr() */
r6 += r8; /* verifier: map value; runtime: zero */
if (r7 != r6) return 0;
*(u8 *)(r7 + 0); /* r7 is inferred non-NULL, both are zero */
At runtime both registers are zero, the comparison is true and the
load faults with NULL pointer dereference.
Require the offset to be within +-BPF_MAX_VAR_OFF in reg_not_null(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark faultable stack helpers as sleepable
The faultable variants of bpf_get_stack() and bpf_get_task_stack() pass
may_fault=true into the common stack collection code. Resolving user-space
build IDs may then call build_id_parse_file() and block on filesystem
reads.
Neither helper prototype sets might_sleep. Since prototype selection uses
the sleepability of the whole program, the verifier can still allow these
helpers from a non-sleepable region within that program, such as an
explicit RCU or preemption-disabled region. The task-stack helper can also
be called from a non-sleepable timer callback of a sleepable program.
Mark both faultable prototypes as sleepable. The existing helper context
check then rejects these calls while continuing to allow them in genuinely
sleepable contexts. |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to execute arbitrary code due to improper neutralization of special elements used in an OS command. |
| An integer overflow vulnerability exists in the MPack Node API in MPack 1.1.1 on 32-bit platforms. When parsing a specially crafted MessagePack array32 or map32 object with an excessively large element count, the page allocation size calculation in mpack_tree_parse_children() can overflow size_t and produce an undersized allocation. Subsequent parsing writes mpack_node_data_t records beyond the allocated heap buffer, resulting in heap-buffer-overflow, memory corruption, and denial of service. |
| nDPI 5.1.0 contains a memory access issue in the DNS dissector and serializer deserialization code. Specially crafted network input can cause byte-buffer addresses at odd offsets to be cast to uint16_t or wider integer pointers and directly dereferenced without alignment checks. This results in undefined behavior and can cause process termination in UBSan-instrumented builds or on strict-alignment architectures, leading to denial of service. |
| hiredis commit 29ea279 (post-v1.5.0) contains an uncontrolled memory allocation vulnerability in its RESP aggregate parser. |
| An out-of-bounds write vulnerability in jslGetTokenValueAsString() in Espruino 2v29 (commit bffc6d0) allows crafted JavaScript input containing an overlong token to trigger a one-byte write beyond the JsLex.token buffer in RELEASE/NO_ASSERT builds. The out-of-bounds write corrupts the adjacent tokenValue pointer, resulting in memory corruption and potentially causing application crashes or denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context
Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP
garbage-collection workqueue, rather than the NAPI poll context. For any
unmatched PTP entries carrying an SKB, it calls
mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For
ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end
of that function is the following:
skb->protocol = eth_type_trans(skb, skb->dev);
napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb);
The napi pointer is one that was placed in the SKB control block when the
trapped packet was received in the NAPI context. Later, when the GC reaps
the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to
napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe
if the poll is running concurrently on another CPU.
In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent
softirq processing, but this only applies to the local CPU. Additionally,
its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish()
invokes netif_receive_skb(). This has not been accurate since the
referenced commit; this patch makes that comment accurate again.
mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX
net_device without any conditions. The NAPI instance's poll, which may be
running concurrent to the GC, is running as an independently-scheduled
kthread which may be on a different CPU. The call to local_bh_disable()
does not guard against this.
If a tx-timestamp timeout produces an unmatched entry (which can be easily
reproduced by running ptp4l and waiting for a port to reach the
UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of
a poll on another CPU, both sides mutate the GRO list concurrently, as
shown below:
[39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE
list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy)
Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018
RIP: 0010:__list_add_valid_or_report+0x79/0xb0
RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246
RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540
RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff
R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003
R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0
Call Trace:
<TASK>
gro_receive_skb+0xee/0x230
mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum]
mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core]
mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci]
__napi_poll+0x31/0x1e0
napi_threaded_poll_loop+0x16b/0x1c0
napi_threaded_poll+0x71/0xa0
kthread+0xfb/0x260
ret_from_fork+0x22d/0x260
ret_from_fork_asm+0x1a/0x30
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
The machinery that leads to this kernel panic has not been changed between
6.18.48 and mainline.
This patch adds an ingress-delivery helper for the PTP packet_finish()
path that calls netif_receive_skb() instead of napi_gro_receive().
netif_receive_skb(), unlike napi_gro_receive(), can be called from outside
of the NAPI instance's poll context, which can occur at the call site for
this path. RX stats accounting and the skb->dev assignment are still
preserved; the only change is the delivery call itself.
This removes GR
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Clean up the bus when fetching ML caps fails
snd_hdac_ext_bus_get_ml_capabilities() may fail and its return code
shall be checked and accounted for. Address the issue by updating the
error-path for avs_pci_probe().
At the same time, if the function in question succeeds but the next part
of avs_pci_probe() fails, the hlink list shall be cleaned up before
leaving the scope. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark syscall helpers as sleepable
bpf_sys_bpf() executes the bpf(2) syscall body, which can take mutexes,
allocate with GFP_KERNEL, and wait for an RCU grace period.
bpf_sys_close() reaches close_fd() and filp_close(), which can sleep as
well.
Both helpers are limited to BPF_PROG_TYPE_SYSCALL, whose main program is
sleepable. That does not make every callback sleepable: a syscall program
can register a bpf_timer callback, and the verifier checks that callback
in a non-sleepable context while retaining the syscall helper set.
Without .might_sleep on the prototypes, such a callback can invoke
bpf_sys_bpf() from hrtimer softirq context and trigger a
scheduling-while-atomic failure. bpf_sys_close() is exposed through the
same missing context check.
Set .might_sleep on both prototypes so the existing helper-context check
rejects them from timer callbacks and other atomic regions. Calls from the
sleepable main body remain valid. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark sched_process_wait argument as nullable
do_wait() passes wo->wo_pid to the sched_process_wait tracepoint.
kernel_wait4() leaves wo_pid NULL for wait4(-1), and
kernel_waitid_prepare() does likewise for waitid(P_ALL).
btf_ctx_access() currently types argument 0 as PTR_TO_BTF_ID |
PTR_TRUSTED. Without PTR_MAYBE_NULL, the verifier accepts an unchecked
dereference. Trusted pointer loads have no fault protection, so a wait for
any child can then cause a NULL pointer dereference in JITed BPF code.
Add sched_process_wait to raw_tp_null_args[] with argument 0 marked
nullable. The verifier rejects an unchecked dereference while preserving
access after the program checks the pointer for NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject tail calls directly from callback frames
A tail call from a non-zero frame is modeled as a return from that frame.
The verifier makes R0 unknown and calls prepare_func_exit() for the taken
branch.
When the current frame is a synchronous callback, prepare_func_exit()
enforces the callback return-value contract and marks R0 precise. Since the
tail-call path synthesized R0 rather than deriving it from an instruction,
precision backtracking reaches the callback-calling instruction with R0
still requested and triggers the "callback unexpected regs" verifier bug.
A CAP_BPF task can therefore cause a WARN and an -EFAULT BPF_PROG_LOAD.
Tail calls reachable from callbacks are already rejected later by
check_max_stack_depth(). Reject a tail call made directly by a callback
before constructing the inconsistent return state, using the existing
diagnostic. Tail calls from ordinary subprograms keep their current
behavior. |
