| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Unauthenticated Cross Site Scripting (XSS) in GlobalPayments WooCommerce <= 1.23.3 versions. |
| Unauthenticated Cross Site Scripting (XSS) in WP Crowdfunding <= 2.2.2 versions. |
| Shop manager PHP Object Injection in YayMail <= 4.4.6 versions. |
| Unauthenticated PHP Object Injection in RexCoin <= 1.2.6 versions. |
| Unauthenticated PHP Object Injection in Quirky <= 1.23 versions. |
| The Burst Statistics WordPress plugin before 3.7.5 does not verify that a request is actually being routed to its own REST API before unloading every other active plugin for that request, allowing unauthenticated attackers to have requests processed with other plugins' protections (such as REST access restrictions, hidden login pages and two-factor authentication) switched off, and to cause other plugins' scheduled tasks to be discarded. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: fix return value for non-recorded-allocated extents in udf_map_block()
When someone creates a corrupted UDF filesystem where symlink contains
other extent type than EXT_RECORDED_ALLOCATED, it can leads to a crash
like:
Oops: general protection fault
KASAN: maybe wild-memory-access
RIP: 0010:page_get_link (fs/namei.c:6503)
Call Trace:
vfs_readlink (fs/namei.c:6419)
do_readlinkat (fs/stat.c:583)
__x64_sys_readlink (fs/stat.c:605 fs/stat.c:602 fs/stat.c:602)
This is because in this case udf_map_block() fails to convert return
value of inode_bmap() from 1 to 0. Returned '1' propagates through
udf_bread() all the way up to __page_get_link() where it ends up being
treated as a folio pointer with obvious results.
Move the reset to 0 line outside the if, so udf_map_block() returns either
0 or -errno, even if the extent type is not EXT_RECORDED_ALLOCATED. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: hold cl_lock in client_has_openowners()
client_has_openowners() walks clp->cl_openowners and reads so_stateids
without clp->cl_lock. nfs4_put_stateowner() unhashes that openowner under
cl_lock and then frees it, so a concurrent EXCHANGE_ID with mismatched
creds can use-after-free the nfs4_openowner.
BUG: KASAN: slab-use-after-free in client_has_state+0x10a/0x140
fs/nfsd/nfs4state.c:3718 client_has_openowners()
nfsd4_exchange_id
nfsd4_proc_compound
nfsd_dispatch
svc_process
Take clp->cl_lock while client_has_openowners() walks the openowner
list. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix overflow in dacloffset bounds check in build_sec_desc()
When the large dacl_offset is provided, dacl_offset + sizeof(struct
smb_acl) overflows on 32-bit builds and the check is passed,
Which makes le16_to_cpu(ppdacl_ptr->size) read out-of-bounds. This
only happens for dacl_offset in range [0xFFFFFFF8, 0xFFFFFFFF]. So
the oob read is max 8 bytes preceding the allocated ppntsd.
unsigned int dacl_offset = le32_to_cpu(ppntsd->dacloffset);
int ppdacl_size, ntacl_size = ppntsd_size - dacl_offset;
if (!dacl_offset ||
(dacl_offset + sizeof(struct smb_acl) > ppntsd_size))
goto out;
Commit beff0bc9d69b ("ksmbd: fix overflow in dacloffset bounds check")
fixes similar checks in other functions. But leaves this one out,
because it is only valid for 32-bit builds.
Reproduced on 32-bit ARM with KASAN, by a client sending SMB2
SET_INFO(SEC) with dacloffset=0xfffffff8, then QUERY_INFO(SEC) on the
same file:
BUG: KASAN: slab-out-of-bounds in build_sec_desc (fs/smb/server/smbacl.c:1105)
Read of size 2 at addr c2a273fa by task kworker/1:1/35
CPU: 1 UID: 0 PID: 35 Comm: kworker/1:1 Not tainted 7.3.0-rc2+ #5
Workqueue: ksmbd-io handle_ksmbd_work
Call trace:
kasan_check_range from build_sec_desc (fs/smb/server/smbacl.c:1105)
build_sec_desc from smb2_query_info (fs/smb/server/smb2pdu.c:7676)
smb2_query_info from handle_ksmbd_work (fs/smb/server/server.c:160)
handle_ksmbd_work from process_one_work (kernel/workqueue.c:3401)
process_one_work from worker_thread (kernel/workqueue.c:3473)
worker_thread from kthread (kernel/kthread.c:436)
Add overflow check. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Fix bounce buffer overflow
High-speed devices with out of spec 1024 byte bulk endpoints exist and
are allowed by USB core, but xhci-hcd always sets packet size to 512.
The exact nature of these devices isn't documented, commit fb5ee84ea72c
("USB: Accept bulk endpoints with 1024-byte maxpacket") only states
that they "don't work with xHCI host controllers", whatever it means.
But somebody (or a malicious device) can try, and then the driver will
allocate a 512 byte bounce buffer for this endpoint and may write up to
1024 bytes into it if particular scatter-gather URBs are used, because
xhci_align_td() obtains packet size from the descriptor. Fix this.
As a side effect, TRBs will be aligned to the packet size chosen by the
driver on all endpoints of all speeds. Alignment serves the xHC, not
device, so this is fine. Only out of spec devices are affected anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: require the dentry lease record to cover struct ceph_mds_reply_lease
parse_reply_info_lease() reads a 32-bit struct_len off the wire and only
checks that many bytes are present, without requiring struct_len to cover
sizeof(struct ceph_mds_reply_lease) (10 bytes). A malicious MDS can
declare a shorter record and still get the pointer published: the
following *p += sizeof(**lease) overshoot is undone by *p = lend, so
nothing downstream rejects the reply. ceph_fill_trace() ->
update_dentry_lease() then reads 10 bytes through that pointer on any
lookup on a mounted CephFS, running past the end of the message front.
Require the record to cover the structure, matching the sibling
parse_reply_info_dir(). A conforming MDS always encodes the full 10
bytes.
BUG: KASAN: slab-out-of-bounds in __update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459)
Read of size 4 at addr ffff888026c63d65 by task kworker/0:3/2366
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
__update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459)
ceph_fill_trace (fs/ceph/inode.c:1474 fs/ceph/inode.c:1823)
mds_dispatch (fs/ceph/mds_client.c:4229 fs/ceph/mds_client.c:7225)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
The buggy address is located 357 bytes inside of
allocated 360-byte region [ffff888026c63c00, ffff888026c63d68) |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: reject mdsmaps that claim more than CEPH_MAX_MDS ranks
check_new_map() sizes its export-target bitmap from CEPH_MAX_MDS but walks
it with newmap->possible_max_rank, which comes straight off the wire:
ceph_mdsmap_decode() sets it to max(m_num_active_mds, m_max_mds), then
overwrites it with the size of the "in" set. Neither is bounded by
CEPH_MAX_MDS, only by m_info allocating, so a monitor announcing more ranks
than the bitmap holds makes test_bit() read past the end of targets[]. The
clear_bit() loop above indexes the same bitmap, though it is additionally
bounded by mdsc->max_sessions. The map arrives on the monitor connection,
which is unauthenticated in legacy msgr mode.
CEPH_MAX_MDS is a protocol constant from src/mds/mdstypes.h, and the
reserved inode ranges in super.h are laid out one rank apart over that
span, so a map claiming more ranks is corrupt. Reject it where the rank
space is established rather than letting the count reach check_new_map().
BUG: KASAN: stack-out-of-bounds in check_new_map (fs/ceph/mds_client.c:5968)
Read of size 8 at addr ffffc90000ac7798 by task kworker/1:2/127
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200)
check_new_map (fs/ceph/mds_client.c:5968)
ceph_mdsc_handle_mdsmap (fs/ceph/mds_client.c:7060)
extra_mon_dispatch (fs/ceph/super.c:802)
mon_dispatch (net/ceph/mon_client.c:1483)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
The buggy address belongs to stack of task kworker/1:2/127
and is located at offset 288 in frame:
check_new_map (fs/ceph/mds_client.c:5846)
This frame has 1 object:
[32, 288) 'targets' |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: udlfb: don't rebuild the mode list while the framebuffer is in use
dlfb_setup_modes() frees info->modelist with fb_destroy_modelist() and
rebuilds it, but fbcon holds raw pointers into that list in
fb_display[i].mode and nothing un-publishes them the way
do_unregister_framebuffer() and store_modes() do with
fbcon_delete_modelist(). The function does refuse to install a new mode
while the framebuffer has users (dlfb->fb_count != 0), but only after the
list is already destroyed. Reached from the 0666 "edid" sysfs attribute,
an unprivileged write to /sys/class/graphics/fb0/edid therefore fails with
-EINVAL and still leaves every fb_display[i].mode dangling; the next
console switch reads the freed fb_videomode in fb_videomode_to_var().
Test fb_count before touching the list. fbcon takes a reference through
fbcon_open(), so that condition covers exactly the states in which
fb_display[] points into the list, and the errno returned to userspace is
unchanged.
BUG: KASAN: slab-use-after-free in fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905)
Read of size 4 at addr ffff8880107b449c by task kworker/1:1/47
Workqueue: events console_callback
Call Trace:
fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905)
display_to_var (drivers/video/fbdev/core/fbcon.c:998)
fbcon_switch (drivers/video/fbdev/core/fbcon.c:2182)
redraw_screen (drivers/tty/vt/vt.c:994)
complete_change_console (drivers/tty/vt/vt_ioctl.c:1141)
console_callback (drivers/tty/vt/vt.c:3358)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
The buggy address is located 28 bytes inside of
freed 96-byte region [ffff8880107b4480, ffff8880107b44e0) |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix integer overflow in the snap trace bounds check
ceph_update_snap_trace() bounds the two encoded snapid arrays that follow a
struct ceph_mds_snap_realm with sizeof(u64) * (num_snaps +
num_prior_parent_snaps). Both counts come straight off the wire as __le32,
so the addition is evaluated in unsigned int and wraps before sizeof(u64)
promotes it to size_t: an MDS sending num_snaps = 1 and
num_prior_parent_snaps = 0xffffffff makes the sum zero and the check
degenerates to ceph_decode_need(&p, e, 0, bad), which always passes.
dup_array() then reads num_snaps * 8 bytes past the end of the message
front, which ceph_msg_new2() allocates at exactly front_len bytes. An
unsolicited CEPH_MSG_CLIENT_SNAP reaches this from a malicious or
compromised MDS with no client-side action, as do the snaptraces carried in
an MDS reply and in a cap import.
Compute the length with size_add()/size_mul() so it saturates at SIZE_MAX
instead of wrapping, in the style fs/ceph/mdsmap.c already uses for
num_export_targets.
BUG: KASAN: slab-out-of-bounds in dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500)
Read of size 8 at addr ffff8880102a16c8 by task kworker/1:2/129
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500)
ceph_update_snap_trace (fs/ceph/snap.c:836)
ceph_handle_snap (fs/ceph/snap.c:1155)
mds_dispatch (fs/ceph/mds_client.c:7234)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
The buggy address is located 0 bytes to the right of
allocated 72-byte region [ffff8880102a1680, ffff8880102a16c8) |
| In the Linux kernel, the following vulnerability has been resolved:
speakup: Fix NULL pointer dereference on VT switch + selection
When selecting/pasting very quickly after VT switch, the tty is not set
yet, leading to a NULL dereference. We can just abort the operation. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: reject short connection requests
nvmet_rdma_parse_cm_connect_req() treats RDMA-CM private data as a
struct nvme_rdma_cm_req but accepts any nonzero private_data_len. The
iWARP path allocates exactly the peer-provided length, so a six-byte MPA
request reaches the parser and the hsqsize load reads two bytes past the
allocation.
Require the complete request structure before reading any of its fields.
The decoded KASAN report is:
BUG: KASAN: slab-out-of-bounds in nvmet_rdma_cm_handler
(drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475
drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814)
Read of size 2 at addr ff1100010459d366 by task kworker/u16:1/41
Workqueue: iw_cm_wq cm_work_handler
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
nvmet_rdma_cm_handler
(drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475
drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814)
cma_cm_event_handler (drivers/infiniband/core/cma.c:2181)
iw_conn_req_handler (drivers/infiniband/core/cma.c:2640)
cm_work_handler
(drivers/infiniband/core/cm.c:2502
drivers/infiniband/core/cm.c:3858)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
Allocated by task 12:
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
__kmalloc_node_track_caller_noprof
(mm/slub.c:5414 mm/slub.c:5545)
kmemdup_noprof (mm/util.c:138)
cm_event_handler
(drivers/infiniband/core/iwcm.c:194
drivers/infiniband/core/iwcm.c:1076)
siw_cm_upcall (drivers/infiniband/sw/siw/siw_cm.c:408)
siw_proc_mpareq (drivers/infiniband/sw/siw/siw_cm.c:750)
siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1086)
The buggy address is located 0 bytes to the right of
allocated 6-byte region [ff1100010459d360, ff1100010459d366) |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: atomically disable rx mode work
virtio-net uses a boolean to gate rx_mode_work during device teardown.
The flag is changed under RTNL, but ndo_set_rx_mode checks it under the
address-list lock. A callback can therefore pass the check and enqueue work
after teardown has flushed it. The work is also enabled before late
probe operations that can fail, allowing probe unwind to free the netdev
with work still queued.
KASAN reports the worker using a virtqueue that probe unwind already freed:
BUG: KASAN: slab-use-after-free in virtqueue_add_split
Workqueue: events virtnet_rx_mode_work
Call Trace:
virtqueue_add_split (drivers/virtio/virtio_ring.c:706)
virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2839)
virtnet_send_command_reply (drivers/net/virtio_net.c:3565)
virtnet_rx_mode_work (drivers/net/virtio_net.c:3833)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3405)
Freed by task 119:
kfree (mm/slub.c:6625)
vp_del_vq.isra.0 (drivers/virtio/virtio_pci_common.c:259)
vp_del_vqs (drivers/virtio/virtio_pci_common.c:285)
virtnet_probe (drivers/net/virtio_net.c:7129)
Use the workqueue disable mechanism to atomically reject new queue attempts
and drain running work. Keep work disabled until probe succeeds or restore
has reattached the netdev, then enable it and replay receive-mode state for
a running interface. Disable it before resource teardown in freeze and
remove. |
| In the Linux kernel, the following vulnerability has been resolved:
media: go7007: only set audio_enabled if go7007_snd_init() succeeded
go7007_register_encoder() sets go->audio_enabled before calling
go7007_snd_init() and discards its return value. go7007_snd_init()
assigns go->snd_context only on success, so a failed ALSA setup leaves
audio_enabled set with snd_context still NULL. The disconnect path tests
audio_enabled and calls go7007_snd_remove(), which dereferences
snd_context unconditionally.
go7007_snd_init() returns -ENODEV once its never-decremented static card
counter reaches SNDRV_CARDS, so SNDRV_CARDS attach/detach cycles arm the
next attach; no memory pressure is needed.
Set go->audio_enabled only once go7007_snd_init() has succeeded.
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: usb_hub_wq hub_event
RIP: 0010:go7007_snd_remove (drivers/media/usb/go7007/snd-go7007.c:273)
Call Trace:
go7007_usb_disconnect (drivers/media/usb/go7007/go7007-usb.c:1336)
usb_unbind_interface (drivers/usb/core/driver.c:461)
device_remove (drivers/base/dd.c:618)
device_release_driver_internal (drivers/base/dd.c:1349)
bus_remove_device (drivers/base/bus.c:664)
device_del (drivers/base/core.c:3965)
usb_disable_device (drivers/usb/core/message.c:1478)
usb_disconnect
hub_event (drivers/usb/core/hub.c:5966)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
media: em28xx: reject audio endpoint with zero packet size
em28xx_audio_urb_init() divides by the audio endpoint's wMaxPacketSize
without checking it, so a USB device that declares a zero-sized audio
endpoint divides by zero at probe time.
Reject a zero-sized audio endpoint like a missing one; the caller already
unwinds on a negative return.
Oops: divide error: 0000 [#1] SMP NOPTI
Workqueue: usb_hub_wq hub_event
RIP: 0010:em28xx_audio_init (drivers/media/usb/em28xx/em28xx-audio.c:718)
Call Trace:
em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248)
em28xx_init_dev.isra.0 (drivers/media/usb/em28xx/em28xx-cards.c:3887)
em28xx_usb_probe (drivers/media/usb/em28xx/em28xx-cards.c:4258)
usb_probe_interface (drivers/usb/core/driver.c:396)
...
usb_set_configuration (drivers/usb/core/message.c:2268)
usb_generic_driver_probe (drivers/usb/core/generic.c:250)
usb_probe_device (drivers/usb/core/driver.c:291)
...
usb_new_device (drivers/usb/core/hub.c:2703)
hub_event (drivers/usb/core/hub.c:5961)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv4: add zero check for snd_cwnd_clamp
When RTAX_CWND is locked, user is able to pass 0 into it.
This could lead to writing 0 to tp->snd_cwnd, leading to a
division by zero error.
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
Call Trace:
<IRQ>
tcp_reno_cong_avoid (net/ipv4/tcp_cong.c:510 (discriminator 1))
tcp_ack (net/ipv4/tcp_input.c:3517 net/ipv4/tcp_input.c:3873 net/ipv4/tcp_input.c:4440)
tcp_rcv_established (net/ipv4/tcp_input.c:6685)
tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1854)
tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2248)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207 (discriminator 1))
ip_local_deliver_finish (net/ipv4/ip_input.c:241 (discriminator 1))
ip_local_deliver (./include/linux/netfilter.h:325 ./include/linux/netfilter.h:319 net/ipv4/ip_input.c:262)
ip_rcv (./include/net/dst.h:481 (discriminator 6) net/ipv4/ip_input.c:492 (discriminator 6) ./include/linux/netfilter.h:325 (discriminator 6) ./include/li)
__netif_receive_skb_one_core (net/core/dev.c:6297 (discriminator 4))
__netif_receive_skb (net/core/dev.c:6410)
process_backlog (net/core/dev.c:6761)
__napi_poll.constprop.0 (net/core/dev.c:7830)
net_rx_action (net/core/dev.c:7893 net/core/dev.c:8050)
handle_softirqs (kernel/softirq.c:645)
__irq_exit_rcu (kernel/softirq.c:679 kernel/softirq.c:519 kernel/softirq.c:758)
irq_exit_rcu (kernel/softirq.c:775)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1062 (discriminator 35) arch/x86/kernel/apic/apic.c:1062 (discriminator 35))
RIP: 0010:tcp_cong_avoid_ai (net/ipv4/tcp_cong.c:482)
Fix by checking if user pass in zero as parameter and if lock is present. |