| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to obtain sensitive information due to improper validation of user-supplied path input. |
| IBM i 7.6, 7.5, 7.4, and 7.3 is vulnerable to stored cross-site scripting. This vulnerability allows an authenticated user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| The Wallet for WooCommerce WordPress plugin before 1.6.10 does not verify the amount actually collected for a wallet top-up before crediting the wallet, allowing customers to top up their wallet balance for less than its value. |
| The giftware WordPress plugin before 4.2.10 does not validate the type of uploaded files in one of its upload paths, allowing unauthenticated users to upload arbitrary files, including PHP code, which can lead to remote code execution. |
| The WP Crowdfunding WordPress plugin before 2.2.1 does not verify order ownership before returning order details, allowing any authenticated users such as Subscribers to read the personal data of any WooCommerce order and enumerate every order in the store. |
| The KiviCare WordPress plugin before 4.5.2 does not properly sanitise and escape user-supplied parameters before using them in a SQL query, allowing authenticated users with a clinic staff-level role to perform SQL injection. |
| The Eventin WordPress plugin before 4.1.20 does not properly restrict access to stored customer records, allowing users with contributor-level access and above to read other customers' personal data such as names and email addresses. |
| Voluntarily withdrawn |
| In sshd in OpenSSH before 10.5, the restrict keyword (in authorized_keys) was supposed to be applicable to tunnel forwarding but was not. |
| The Kirki WordPress plugin before 6.2.1 does not properly authorise its front-end form submission REST routes and passes attacker-controlled input through shortcode execution, allowing unauthenticated users to run any shortcode registered on the site, which on a default install leads to disclosure of the site administrator's email address and an arbitrary-recipient mail relay from the victim's domain. |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 is vulnerable to a denial of service attack. |
| IBM Verify Identity Access 11.0 through 11.0.2 and IBM Security Verify Access 10.0 through 10.0.9.1 and IBM Verify Identity Access Container 11.0 through 11.0.2 and IBM Security Verify Access Container 10.0 through 10.0.9.1 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: initialize SDIO data work before cleanup
brcmf_sdio_probe() stores the newly allocated bus in sdiodev->bus before
allocating the ordered workqueue. If that allocation fails, the function
jumps to fail and calls brcmf_sdio_remove().
brcmf_sdio_remove() unconditionally cancels bus->datawork. Initialize the
work item before the first failure path that can reach brcmf_sdio_remove(),
so the cleanup path always observes a valid work object.
This issue was found by our static analysis tool and then confirmed by
manual review of the probe error path and the remove-time work drain. The
problem pattern is an early setup failure that reaches a cleanup helper
which cancels an embedded work item before its initializer has run.
A QEMU PoC forced alloc_ordered_workqueue() to fail at the same point in
brcmf_sdio_probe(), before INIT_WORK(&bus->datawork) is reached. The
resulting fail path calls brcmf_sdio_remove(), and DEBUG_OBJECTS reports
the invalid work drain with brcmf_sdio_probe() and brcmf_sdio_remove() in
the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix memory leak in helper_firmware_cb()
helper_firmware_cb() neglects to free the single-stage firmware image
after a successful async load, leading to a memory leak in the USB
firmware-download path.
Fix this memory leak by calling release_firmware() immediately after
lbs_fw_loaded() returns.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
the current wireless tree.
An x86_64 allyesconfig build showed no new warnings. As we do not have
compatible Libertas USB hardware for exercising this firmware-download
path, no runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ipw2100: fix potential memory leak in ipw2100_pci_init_one()
The memory allocated in the ipw2100_alloc_device() function is not freed
in some of the error paths in ipw2100_pci_init_one(). Fix that by
converting the direct return into a goto to the error path return.
The error path when pci_enable_device() fails cannot jump to fail, since
at this point priv is not set, so perform error handling inline. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: fix double free and WARN_ON in add_mtd_device() error paths
When device_register() or mtd_nvmem_add() fails inside
add_mtd_device() for a partition, the error handling triggers
mtd_release() via put_device() or device_unregister(). mtd_release()
calls release_mtd_partition() which frees the mtd_info structure.
However, callers such as mtd_add_partition() and add_mtd_partitions()
also call free_partition() in their error paths, resulting in a double
free.
Additionally, release_mtd_partition() hits WARN_ON(!list_empty(
&mtd->part.node)) because the partition node is still linked in the
parent's partitions list when the release callback fires from the
add_mtd_device() error path.
Fix this by overriding dev->type and dev->release before put_device()
in the error paths, so that device_release() invokes a no-op function
instead of mtd_release(). For the mtd_nvmem_add() failure case,
device_unregister() is replaced with device_del() to separate the
device removal from the final kobject reference drop, allowing the
override to take effect before put_device() is called.
The callers' error paths (list_del + free_partition) remain the sole
owners of mtd_info lifetime on add_mtd_device() failure, which is the
expected contract.
The normal partition teardown path is not affected: del_mtd_device()
goes through kref_put() -> mtd_device_release() -> device_unregister()
with dev->type still set to &mtd_devtype, so mtd_release() ->
release_mtd_partition() continues to work correctly for the regular
removal case. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy()
mtd_concat_destroy() frees item->concat so calling
mtd_virt_concat_put_mtd_devices(item->concat) after that leads to a
use-after-free.
Fix it by moving mtd_virt_concat_put_mtd_devices() before
mtd_concat_destroy(). |
| RustFS is a distributed object storage system built in Rust. From 1.0.0-alpha.64 until 1.0.0-rc.1, RustFS external OPA authorization enabled by RUSTFS_POLICY_PLUGIN_URL in crates/iam/src/sys.rs sets PreparedIamAuth.needs_existing_object_tag incorrectly for PreparedIamMode::Opa, causing maybe_merge_object_tag_conditions to omit s3:ExistingObjectTag/* values and allowing authenticated users to bypass tag-based policy restrictions. This issue is fixed in version 1.0.0-rc.1. |
| Credentials for a deleted user may remain valid for a short period under specific conditions. |
| Prompty is a markdown file format (.prompty) for LLM prompts. Prior to 0.1.5 and 2.0.0-beta.5, the TypeScript Nunjucks renderer evaluated untrusted .prompty template bodies with unrestricted JavaScript member access. An attacker-controlled template could traverse constructor and prototype properties to execute JavaScript in the host Node.js process. This issue is fixed in versions 0.1.5 and 2.0.0-beta.5. |
