| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A security vulnerability has been detected in libimobiledevice up to 1.4.0. Impacted is the function afc_file_open of the file src/afc.c of the component AFC File Handler. The manipulation of the argument bytes leads to out-of-bounds read. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in libimobiledevice up to 1.4.0. This issue affects the function service_receive of the file src/afc.c of the component AFC Service. Executing a manipulation can lead to double free. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in libimobiledevice up to 1.4.0. This vulnerability affects the function afc_get_device_info_key of the file src/afc.c of the component Device Info Handler. Performing a manipulation of the argument Value results in memory corruption. The attack requires a local approach. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in libimobiledevice up to 1.4.0. This affects an unknown part of the file src/afc.c of the component AFC. Such manipulation leads to heap-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in GNOME libgsf up to 1.14.60. The impacted element is the function ole_info_read_metabat of the file gsf/gsf-infile-msole.c of the component OLE2 Parser. The manipulation leads to heap-based buffer overflow. The attack can be initiated remotely. The identifier of the patch is a8e25560b74f84c3f86df6ca0ac59195fa5af68a. It is recommended to apply a patch to fix this issue. |
| A weakness has been identified in ggml-org llama.cpp. Affected by this issue is the function list_pockettts_state_slots of the file tools/mtmd/models/pockettts-gen.cpp of the component Pocket-TTS. This manipulation of the argument mmproj causes out-of-bounds write. The attack requires local access. The exploit has been made available to the public and could be used for attacks. Upgrading to version b11796 can resolve this issue. Patch name: 0a1ef309cdbb9f2024f58a38fb4c42352c5db569. The affected component should be upgraded. The reported heap out‑of‑bounds write (gen‑audio / pocket‑tts state_out path) is no longer a silent exploitable heap write on current master and the latest release b11871 - a malicious mmproj that previously triggered it now trips a release‑active GGML_ASSERT and aborts. But the submitter's recommended by‑construction fix (PR #29360 "prevent OOB accesses from malformed mmproj files") is still open. So the root cause is detected‑and‑aborted, not prevented‑by‑design. |
| A flaw has been found in Fusion Creators Studio SCP Containment Breach Multiplayer up to 1.295. This issue affects the function BlitzBanks of the component Skynet++ Virtual Machine. Executing a manipulation can lead to out-of-bounds write. The attack can be executed remotely. The exploit has been published and may be used. Upgrading to version 1.3R is capable of addressing this issue. It is recommended to upgrade the affected component. |
| A heap-based buffer overflow was found in GIMP’s GIF export plug-in. Exporting an image with very large width and height can cause 32-bit overflow when computing the pixel buffer size. The plug-in allocates a buffer based on the wrapped value while GEGL writes using the true image extent, rooted in integer overflow |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix heap out-of-bounds write in krb5_authenticate()
In krb5_authenticate(), out_len is calculated to determine available
headroom in response_buf for the incoming Kerberos AP-REP token. However,
when SMB2_SESSION_SETUP is processed as a non-first element of a compounded
SMB2 request, the calculation omits work->next_smb2_rsp_hdr_off.
This causes out_len to overstate remaining buffer headroom by
the cumulative size of prior responses in the compound chain. Consequently,
the length check in ksmbd_krb5_authenticate()
(*out_len <= resp->spnego_blob_len) passes erroneously, allowing memcpy()
to write the AP-REP blob past the end of response_buf into adjacent kernel
heap memory.
Fix this by subtracting work->next_smb2_rsp_hdr_off when computing out_len,
ensuring it accurately reflects physical remaining buffer space. |
| In the Linux kernel, the following vulnerability has been resolved:
pfcp: make sure the SEID is linear before reading it
pfcp_encap_recv() only makes sure that the UDP header and the 4 byte
PFCP header are in the linear area. When the S flag is set,
pfcp_session_recv() then reads the 8 byte SEID that follows, which is
not covered by the pskb_may_pull() check.
A short PFCP packet with the S flag set, or one whose session header
lies in a fragment, therefore makes pfcp_session_recv() read beyond the
end of the packet data, and whatever it finds there is stored in the
tunnel metadata that flower later classifies on.
Pull up to the end of the SEID before reading it, and drop packets
that are too short to contain it. Reload the header pointer afterwards
since pskb_may_pull() may reallocate the skb head.
Use offsetofend() rather than sizeof(struct pfcphdr_session): the
structure is not packed, so its size is 16 bytes because of the
alignment of the __be64 member, while the header on the wire is only 12
bytes, and valid session messages would be dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
cipso: adjust cached option offsets when removing CIPSO
cipso_v4_skbuff_delattr() removes the CIPSO bytes but does not adjust
cached offsets for options that follow them.
For example, with a valid 10-byte CIPSO option followed by a seven-byte
RR option, parsing records rr at offset 30. Removing CIPSO moves RR to
offset 20, while the cached offset remains 30. Consumers such as
ip_forward_options() and __ip_options_echo() then access the wrong bytes;
the latter may interpret packet data as the option length and copy it into
fixed-size option storage.
Mirror cipso_v4_delopt() and subtract cipso_len from the srr, rr, ts and
router_alert offsets when they follow CIPSO. cipso_len is the distance
the first memmove() shifts those options. The later header move and
network-header reset relocate the bytes and their offset base together. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler
A CPU going down has to empty its own rq. Its hotplug thread waits in
sched_cpu_wait_empty() until nothing else is left, and the only thing that
wakes it is balance_push(), which runs from __schedule() on the dying CPU
and pushes off the migratable tasks the CPU picks.
sched_ext breaks this. A task sitting on a user DSQ or held by the BPF
scheduler is still counted on its rq, but an inactive CPU no longer calls
ops.dispatch() and can't pull the task back. The dying CPU goes idle with
the task still counted, and one of two things happens:
- Another CPU consumes the task. The rq empties without a __schedule() on
the dying CPU, so the hotplug thread is never woken and cpu_down() hangs
holding cpu_hotplug_lock.
- The task is affine only to the dying CPU. Nothing can move it, and the
offline stalls until the watchdog ejects the BPF scheduler.
When the rq goes offline, re-enqueue every task on it that isn't already on
the local DSQ. An enqueue on an offline rq lands on the local DSQ, so the
dying CPU itself picks the tasks and balance_push() pushes them off, the
same as for the other sched classes. From then on no sched_ext path on
another CPU can pull a task off the rq.
ops.dispatch() currently stops as soon as the CPU goes inactive, and CPU
hotplug then waits for an RCU grace period before taking the rq offline. A
BPF-held task affine only to the dying CPU and preempted inside an RCU
read-side critical section would block that grace period, and the rq would
never go offline. Test SCX_RQ_ONLINE directly so that ops.dispatch() keeps
running until the rq goes offline. Only the dying CPU's own hotplug thread
clears the flag during teardown, and task_can_run_on_remote_rq() still keeps
other rqs' tasks off the CPU. |
| Memory corruption vulnerabilities in the affected interface of AOS-10 could lead to remote code execution by an unauthenticated adjacent attacker. Successful exploitation could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system. |
| An unauthenticated buffer overflow vulnerability exists in the PAPI protocol of AOS-8. Successful exploitation could allow an unauthenticated remote attacker to disrupt the availability of the affected service on the controller, with a limited impact to its integrity. |
| The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 23.03 to before version 26.05, SolrTools.cleanUpQuery() strips Solr local-parameter syntax ({!...}) from user-supplied query strings before they reach Solr. Its regex can be bypassed by wrapping the local parameter in a second pair of curly braces ({{!...}}): the outer braces are stripped, the inner {!...} survives intact, and a valid Solr local parameter is forwarded. The flaw is in the shared sanitizer, so it affects any endpoint that routes user input through cleanUpQuery. The double-brace bypass applies from v23.10 (the greedy \{(.+)\} regex); a related bare-!join rewrap path is present. This issue has been patched in version 26.05. |
| Buffer overflow vulnerabilities exist in the affected interface of AOS-8 that could lead to unauthenticated remote code execution. Successful exploitation could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system. |
| The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 25.08 to before version 26.05, the IIIF Auth 2.0 endpoints auth/login and auth/token in AuthorizationFlowResource accept an origin query parameter without validation and then (1) embed it into the Content-Security-Policy: frame-ancestors response header and (2) embed it into an HTML response body as a JavaScript single-quoted postMessage argument. Because the attacker controls both the login and token calls that initiate the flow, the unescaped value yields reflected XSS. This issue has been patched in version 26.05. |
| Buffer overflow vulnerabilities in the affected interface of AOS-10 or AOS-8 could allow an unauthenticated adjacent attacker to execute arbitrary code by sending specially crafted data to the affected interface. Successful exploitation could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system. |
| A security flaw has been discovered in Kakao khaiii up to 0.4. The impacted element is the function khaiii::nn::Linear::open of the file src/main/cpp/khaiii/nn/Linear.cpp of the component JSON Config File Handler. The manipulation of the argument hidden_dim/class_num results in out-of-bounds read. The attack requires a local approach. The exploit has been released to the public and may be used for attacks. The vendor explains: "khaiii treats the resource directory (--rsc-dir) as trusted input, like a binary or a shared library. To use this defect, an attacker must already be able to write to that directory. With that access, an attacker can change the analysis results without this defect." This vulnerability only affects products that are no longer supported by the maintainer. |
| A memory corruption vulnerability exists in the web-based management interface of AOS-8. Successful exploitation could allow an authenticated low privilege attacker with local access to view some system files and interrupt the normal operation of the affected service. |
